[OpenWrt-Devel] jffs2: Erase at 0x01ab0000 failed immediately: errno -22 on ZBT-WG3526 (32M)
Enrico Mioso
mrkiko.rs at gmail.com
Sun Mar 1 21:52:38 EST 2020
Sorry for the third mail... note: on 4.19.71 this problem did not happen.
On Mon, 2 Mar 2020, Enrico Mioso wrote:
> Date: Mon, 2 Mar 2020 03:44:38
> From: Enrico Mioso <mrkiko.rs at gmail.com>
> To: openwrt-devel at lists.openwrt.org
> Cc: Neil Brown <neilb at suse.de>
> Subject: Re: jffs2: Erase at 0x01ab0000 failed immediately: errno -22 on
> ZBT-WG3526 (32M)
>
> Ok guys, the error rpeats itself, and jffs2 seems to get corrupted. And even
> erasing the mtd6 device fails at some point.
> Even the F2FS filesystem on the internal SSD does corrupt. This remembers me
> the issue I was having when using the GnuBee PC 1 some time ago.
> any help would be really apreciated.
>
> Enrico
>
>
> On Mon, 2 Mar 2020, Enrico Mioso wrote:
>
>> Date: Mon, 2 Mar 2020 03:20:40
>> From: Enrico Mioso <mrkiko.rs at gmail.com>
>> To: openwrt-devel at lists.openwrt.org
>> Subject: jffs2: Erase at 0x01ab0000 failed immediately: errno -22 on
>> ZBT-WG3526 (32M)
>>
>> Hi! I flashed OpenWRt master (commit
>> 4349d4c6823bfe09caabbdd3c9a65198addc76d6) on this device. All seems to work
>> fine, but I sawthis in the dmesg.
>>
>> should I worry about my flash chip?
>> thank you guys!!
>>
>> Enrico
>>
>> config.buildinfo:
>>
>> CONFIG_TARGET_ramips=y
>> CONFIG_TARGET_ramips_mt7621=y
>> CONFIG_TARGET_ramips_mt7621_DEVICE_zbtlink_zbt-wg3526-32m=y
>> CONFIG_FEED_luci=y
>> CONFIG_FEED_packages=y
>> CONFIG_FEED_routing=y
>> CONFIG_FEED_telephony=y
>> CONFIG_IMAGEOPT=y
>> # CONFIG_KERNEL_CRASHLOG is not set
>> CONFIG_KERNEL_MIPS_FPU_EMULATOR=y
>> CONFIG_KERNEL_MIPS_FP_SUPPORT=y
>> # CONFIG_KERNEL_SWAP is not set
>> CONFIG_PACKAGE_ip-tiny=y
>> CONFIG_PACKAGE_kmod-crypto-crc32=y
>> CONFIG_PACKAGE_kmod-crypto-crc32c=y
>> CONFIG_PACKAGE_kmod-crypto-hash=y
>> CONFIG_PACKAGE_kmod-fs-ext4=y
>> CONFIG_PACKAGE_kmod-fs-f2fs=y
>> CONFIG_PACKAGE_kmod-fs-vfat=y
>> CONFIG_PACKAGE_kmod-lib-crc16=y
>> CONFIG_PACKAGE_kmod-mii=y
>> CONFIG_PACKAGE_kmod-nls-cp437=y
>> CONFIG_PACKAGE_kmod-nls-iso8859-1=y
>> CONFIG_PACKAGE_kmod-nls-utf8=y
>> CONFIG_PACKAGE_kmod-tun=y
>> CONFIG_PACKAGE_kmod-udptunnel4=y
>> CONFIG_PACKAGE_kmod-udptunnel6=y
>> CONFIG_PACKAGE_kmod-usb-net=y
>> CONFIG_PACKAGE_kmod-usb-net-qmi-wwan=y
>> CONFIG_PACKAGE_kmod-usb-serial=y
>> CONFIG_PACKAGE_kmod-usb-serial-option=y
>> CONFIG_PACKAGE_kmod-usb-serial-qualcomm=m
>> CONFIG_PACKAGE_kmod-usb-serial-wwan=y
>> CONFIG_PACKAGE_kmod-usb-wdm=y
>> CONFIG_PACKAGE_kmod-wireguard=y
>> CONFIG_PACKAGE_wireguard=y
>> CONFIG_PACKAGE_wireguard-tools=y
>>
>> full dmesg:
>> [ 0.000000] Linux version 4.14.171 (mrkiko at mStation) (gcc version 8.3.0
>> (OpenWrt GCC 8.3.0 r12417-4349d4c682)) #0 SMP Sun Mar 1 22:39:27 2020
>> [ 0.000000] SoC Type: MediaTek MT7621 ver:1 eco:3
>> [ 0.000000] bootconsole [early0] enabled
>> [ 0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc)
>> [ 0.000000] MIPS: machine is Zbtlink ZBT-WG3526 (32M)
>> [ 0.000000] Determined physical RAM map:
>> [ 0.000000] memory: 1c000000 @ 00000000 (usable)
>> [ 0.000000] memory: 04000000 @ 20000000 (usable)
>> [ 0.000000] Initrd not found or empty - disabling initrd
>> [ 0.000000] VPE topology {2,2} total 4
>> [ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32
>> bytes.
>> [ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize
>> 32 bytes
>> [ 0.000000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
>> [ 0.000000] Zone ranges:
>> [ 0.000000] Normal [mem 0x0000000000000000-0x000000000fffffff]
>> [ 0.000000] HighMem [mem 0x0000000010000000-0x0000000023ffffff]
>> [ 0.000000] Movable zone start for each node
>> [ 0.000000] Early memory node ranges
>> [ 0.000000] node 0: [mem 0x0000000000000000-0x000000001bffffff]
>> [ 0.000000] node 0: [mem 0x0000000020000000-0x0000000023ffffff]
>> [ 0.000000] Initmem setup node 0 [mem
>> 0x0000000000000000-0x0000000023ffffff]
>> [ 0.000000] On node 0 totalpages: 131072
>> [ 0.000000] free_area_init_node: node 0, pgdat 805f8360, node_mem_map
>> 81003000
>> [ 0.000000] Normal zone: 576 pages used for memmap
>> [ 0.000000] Normal zone: 0 pages reserved
>> [ 0.000000] Normal zone: 65536 pages, LIFO batch:15
>> [ 0.000000] HighMem zone: 65536 pages, LIFO batch:15
>> [ 0.000000] random: get_random_bytes called from start_kernel+0x9c/0x4d8
>> with crng_init=0
>> [ 0.000000] percpu: Embedded 14 pages/cpu s26544 r8192 d22608 u57344
>> [ 0.000000] pcpu-alloc: s26544 r8192 d22608 u57344 alloc=14*4096
>> [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1
>> zonelists, mobility grouping on. Total pages: 130496
>> [ 0.000000] Kernel command line: console=ttyS0,115200
>> rootfstype=squashfs,jffs2
>> [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
>> [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072
>> bytes)
>> [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536
>> bytes)
>> [ 0.000000] Writing ErrCtl register=0001aa20
>> [ 0.000000] Readback ErrCtl register=0001aa20
>> [ 0.000000] Memory: 510976K/524288K available (4819K kernel code, 244K
>> rwdata, 1048K rodata, 1236K init, 253K bss, 13312K reserved, 0K
>> cma-reserved, 262144K highmem)
>> [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
>> [ 0.000000] Hierarchical RCU implementation.
>> [ 0.000000] NR_IRQS: 256
>> [ 0.000000] CPU Clock: 880MHz
>> [ 0.000000] clocksource: GIC: mask: 0xffffffffffffffff max_cycles:
>> 0xcaf478abb4, max_idle_ns: 440795247997 ns
>> [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff,
>> max_idle_ns: 4343773742 ns
>> [ 0.000010] sched_clock: 32 bits at 440MHz, resolution 2ns, wraps every
>> 4880645118ns
>> [ 0.007824] Calibrating delay loop... 586.13 BogoMIPS (lpj=2930688)
>> [ 0.073981] pid_max: default: 32768 minimum: 301
>> [ 0.078798] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
>> [ 0.085307] Mountpoint-cache hash table entries: 1024 (order: 0, 4096
>> bytes)
>> [ 0.094587] Hierarchical SRCU implementation.
>> [ 0.099822] smp: Bringing up secondary CPUs ...
>> [ 0.105966] Primary instruction cache 32kB, VIPT, 4-way, linesize 32
>> bytes.
>> [ 0.105975] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize
>> 32 bytes
>> [ 0.105987] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
>> [ 0.106134] CPU1 revision is: 0001992f (MIPS 1004Kc)
>> [ 0.164579] Synchronize counters for CPU 1: done.
>> [ 0.206013] Primary instruction cache 32kB, VIPT, 4-way, linesize 32
>> bytes.
>> [ 0.206021] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize
>> 32 bytes
>> [ 0.206030] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
>> [ 0.206106] CPU2 revision is: 0001992f (MIPS 1004Kc)
>> [ 0.255787] Synchronize counters for CPU 2: done.
>> [ 0.287157] Primary instruction cache 32kB, VIPT, 4-way, linesize 32
>> bytes.
>> [ 0.287165] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize
>> 32 bytes
>> [ 0.287173] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
>> [ 0.287253] CPU3 revision is: 0001992f (MIPS 1004Kc)
>> [ 0.340970] Synchronize counters for CPU 3: done.
>> [ 0.370844] smp: Brought up 1 node, 4 CPUs
>> [ 0.379150] clocksource: jiffies: mask: 0xffffffff max_cycles:
>> 0xffffffff, max_idle_ns: 19112604462750000 ns
>> [ 0.388958] futex hash table entries: 1024 (order: 3, 32768 bytes)
>> [ 0.395386] pinctrl core: initialized pinctrl subsystem
>> [ 0.402163] NET: Registered protocol family 16
>> [ 0.417708] FPU Affinity set after 11720 emulations
>> [ 0.419274] pull PCIe RST: RALINK_RSTCTRL = 0
>> [ 0.723989] release PCIe RST: RALINK_RSTCTRL = 7000000
>> [ 0.729022] ***** Xtal 40MHz *****
>> [ 0.732396] release PCIe RST: RALINK_RSTCTRL = 7000000
>> [ 0.737502] Port 0 N_FTS = 1b105000
>> [ 0.740944] Port 1 N_FTS = 1b105000
>> [ 0.744404] Port 2 N_FTS = 1b105000
>> [ 1.899350] -> 21007f2
>> [ 1.901704] PCIE0 enabled
>> [ 1.904298] PCIE1 enabled
>> [ 1.906887] PCIE2 enabled
>> [ 1.909509] PCI host bridge /pcie at 1e140000 ranges:
>> [ 1.914254] MEM 0x0000000060000000..0x000000006fffffff
>> [ 1.919420] IO 0x000000001e160000..0x000000001e16ffff
>> [ 1.924629] PCI coherence region base: 0xbfbf8000, mask/settings:
>> 0x60000000
>> [ 1.941857] mt7621_gpio 1e000600.gpio: registering 32 gpios
>> [ 1.947712] mt7621_gpio 1e000600.gpio: registering 32 gpios
>> [ 1.953491] mt7621_gpio 1e000600.gpio: registering 32 gpios
>> [ 1.960794] i2c-mt7621 1e000900.i2c: clock 100KHz, re-start not support
>> [ 1.967960] PCI host bridge to bus 0000:00
>> [ 1.972045] pci_bus 0000:00: root bus resource [mem
>> 0x60000000-0x6fffffff]
>> [ 1.978812] pci_bus 0000:00: root bus resource [io 0xffffffff]
>> [ 1.984709] pci_bus 0000:00: root bus resource [??? 0x00000000 flags
>> 0x0]
>> [ 1.991433] pci_bus 0000:00: No busn resource found for root bus, will
>> use [bus 00-ff]
>> [ 1.999368] pci 0000:00:00.0: [0e8d:0801] type 01 class 0x060400
>> [ 1.999411] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x7fffffff]
>> [ 1.999423] pci 0000:00:00.0: reg 0x14: [mem 0x60500000-0x6050ffff]
>> [ 1.999490] pci 0000:00:00.0: supports D1
>> [ 1.999499] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
>> [ 1.999757] pci 0000:00:01.0: [0e8d:0801] type 01 class 0x060400
>> [ 1.999796] pci 0000:00:01.0: reg 0x10: [mem 0x00000000-0x7fffffff]
>> [ 1.999816] pci 0000:00:01.0: reg 0x14: [mem 0x60510000-0x6051ffff]
>> [ 1.999882] pci 0000:00:01.0: supports D1
>> [ 1.999892] pci 0000:00:01.0: PME# supported from D0 D1 D3hot
>> [ 2.000115] pci 0000:00:02.0: [0e8d:0801] type 01 class 0x060400
>> [ 2.000165] pci 0000:00:02.0: reg 0x10: [mem 0x00000000-0x7fffffff]
>> [ 2.000183] pci 0000:00:02.0: reg 0x14: [mem 0x60520000-0x6052ffff]
>> [ 2.000245] pci 0000:00:02.0: supports D1
>> [ 2.000254] pci 0000:00:02.0: PME# supported from D0 D1 D3hot
>> [ 2.000748] pci 0000:01:00.0: [14c3:7603] type 00 class 0x028000
>> [ 2.000808] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x000fffff]
>> [ 2.000945] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
>> [ 2.001153] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
>> [ 2.001419] pci 0000:02:00.0: [14c3:7662] type 00 class 0x028000
>> [ 2.001485] pci 0000:02:00.0: reg 0x10: [mem 0x00000000-0x000fffff
>> 64bit]
>> [ 2.001533] pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
>> [ 2.001627] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
>> [ 2.001838] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
>> [ 2.002102] pci 0000:03:00.0: [1b21:0611] type 00 class 0x010185
>> [ 2.002159] pci 0000:03:00.0: reg 0x10: [io 0x0000-0x0007]
>> [ 2.002180] pci 0000:03:00.0: reg 0x14: [io 0x0000-0x0003]
>> [ 2.002196] pci 0000:03:00.0: reg 0x18: [io 0x0000-0x0007]
>> [ 2.002211] pci 0000:03:00.0: reg 0x1c: [io 0x0000-0x0003]
>> [ 2.002226] pci 0000:03:00.0: reg 0x20: [io 0x0000-0x000f]
>> [ 2.002243] pci 0000:03:00.0: reg 0x24: [mem 0x00000000-0x000001ff]
>> [ 2.002258] pci 0000:03:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
>> [ 2.002540] pci_bus 0000:03: busn_res: [bus 03-ff] end is updated to 03
>> [ 2.002567] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 03
>> [ 2.002672] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000]
>> [ 2.009184] pci 0000:00:00.0: BAR 0: failed to assign [mem size
>> 0x80000000]
>> [ 2.016154] pci 0000:00:01.0: BAR 0: no space for [mem size 0x80000000]
>> [ 2.022661] pci 0000:00:01.0: BAR 0: failed to assign [mem size
>> 0x80000000]
>> [ 2.029599] pci 0000:00:02.0: BAR 0: no space for [mem size 0x80000000]
>> [ 2.036146] pci 0000:00:02.0: BAR 0: failed to assign [mem size
>> 0x80000000]
>> [ 2.043082] pci 0000:00:00.0: BAR 8: assigned [mem
>> 0x60000000-0x600fffff]
>> [ 2.049796] pci 0000:00:01.0: BAR 8: assigned [mem
>> 0x60100000-0x601fffff]
>> [ 2.056554] pci 0000:00:01.0: BAR 9: assigned [mem 0x60200000-0x602fffff
>> pref]
>> [ 2.063704] pci 0000:00:02.0: BAR 8: assigned [mem
>> 0x60300000-0x603fffff]
>> [ 2.070468] pci 0000:00:02.0: BAR 9: assigned [mem 0x60400000-0x604fffff
>> pref]
>> [ 2.077622] pci 0000:00:00.0: BAR 1: assigned [mem
>> 0x60500000-0x6050ffff]
>> [ 2.084385] pci 0000:00:01.0: BAR 1: assigned [mem
>> 0x60510000-0x6051ffff]
>> [ 2.091099] pci 0000:00:02.0: BAR 1: assigned [mem
>> 0x60520000-0x6052ffff]
>> [ 2.097858] pci 0000:00:02.0: BAR 7: no space for [io size 0x1000]
>> [ 2.104050] pci 0000:00:02.0: BAR 7: failed to assign [io size 0x1000]
>> [ 2.110649] pci 0000:01:00.0: BAR 0: assigned [mem
>> 0x60000000-0x600fffff]
>> [ 2.117367] pci 0000:00:00.0: PCI bridge to [bus 01]
>> [ 2.122309] pci 0000:00:00.0: bridge window [mem
>> 0x60000000-0x600fffff]
>> [ 2.129034] pci 0000:02:00.0: BAR 0: assigned [mem 0x60100000-0x601fffff
>> 64bit]
>> [ 2.136311] pci 0000:02:00.0: BAR 6: assigned [mem 0x60200000-0x6020ffff
>> pref]
>> [ 2.143449] pci 0000:00:01.0: PCI bridge to [bus 02]
>> [ 2.148397] pci 0000:00:01.0: bridge window [mem
>> 0x60100000-0x601fffff]
>> [ 2.155113] pci 0000:00:01.0: bridge window [mem 0x60200000-0x602fffff
>> pref]
>> [ 2.162321] pci 0000:03:00.0: BAR 6: assigned [mem 0x60400000-0x6040ffff
>> pref]
>> [ 2.169461] pci 0000:03:00.0: BAR 5: assigned [mem
>> 0x60300000-0x603001ff]
>> [ 2.176239] pci 0000:03:00.0: BAR 4: no space for [io size 0x0010]
>> [ 2.182415] pci 0000:03:00.0: BAR 4: failed to assign [io size 0x0010]
>> [ 2.189015] pci 0000:03:00.0: BAR 0: no space for [io size 0x0008]
>> [ 2.195202] pci 0000:03:00.0: BAR 0: failed to assign [io size 0x0008]
>> [ 2.201791] pci 0000:03:00.0: BAR 2: no space for [io size 0x0008]
>> [ 2.207994] pci 0000:03:00.0: BAR 2: failed to assign [io size 0x0008]
>> [ 2.214583] pci 0000:03:00.0: BAR 1: no space for [io size 0x0004]
>> [ 2.220778] pci 0000:03:00.0: BAR 1: failed to assign [io size 0x0004]
>> [ 2.227363] pci 0000:03:00.0: BAR 3: no space for [io size 0x0004]
>> [ 2.233573] pci 0000:03:00.0: BAR 3: failed to assign [io size 0x0004]
>> [ 2.240152] pci 0000:00:02.0: PCI bridge to [bus 03]
>> [ 2.245057] pci 0000:00:02.0: bridge window [mem
>> 0x60300000-0x603fffff]
>> [ 2.251823] pci 0000:00:02.0: bridge window [mem 0x60400000-0x604fffff
>> pref]
>> [ 2.260578] clocksource: Switched to clocksource GIC
>> [ 2.267445] NET: Registered protocol family 2
>> [ 2.272412] TCP established hash table entries: 2048 (order: 1, 8192
>> bytes)
>> [ 2.279294] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
>> [ 2.285758] TCP: Hash tables configured (established 2048 bind 2048)
>> [ 2.292181] UDP hash table entries: 256 (order: 1, 8192 bytes)
>> [ 2.297953] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
>> [ 2.304453] NET: Registered protocol family 1
>> [ 2.308785] PCI: CLS 0 bytes, default 32
>> [ 2.540520] 4 CPUs re-calibrate udelay(lpj = 2924544)
>> [ 2.547457] workingset: timestamp_bits=14 max_order=17 bucket_order=3
>> [ 2.560344] random: fast init done
>> [ 2.561698] squashfs: version 4.0 (2009/01/31) Phillip Lougher
>> [ 2.569467] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME)
>> (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
>> [ 2.583068] bounce: pool size: 64 pages
>> [ 2.586843] io scheduler noop registered
>> [ 2.590753] io scheduler deadline registered (default)
>> [ 2.596839] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled
>> [ 2.604556] console [ttyS0] disabled
>> [ 2.608110] 1e000c00.uartlite: ttyS0 at MMIO 0x1e000c00 (irq = 19,
>> base_baud = 3125000) is a 16550A
>> [ 2.617182] console [ttyS0] enabled
>> [ 2.624065] bootconsole [early0] disabled
>> [ 2.634362] MediaTek Nand driver init, version v2.1 Fix AHB virt2phys
>> error
>> [ 2.641781] spi-mt7621 1e000b00.spi: sys_freq: 220000000
>> [ 2.656954] m25p80 spi0.0: w25q256 (32768 Kbytes)
>> [ 2.661740] 4 fixed-partitions partitions found on MTD device spi0.0
>> [ 2.668061] Creating 4 MTD partitions on "spi0.0":
>> [ 2.672858] 0x000000000000-0x000000030000 : "u-boot"
>> [ 2.678933] 0x000000030000-0x000000040000 : "u-boot-env"
>> [ 2.685304] 0x000000040000-0x000000050000 : "factory"
>> [ 2.691398] 0x000000050000-0x000002000000 : "firmware"
>> [ 2.697705] 2 uimage-fw partitions found on MTD device firmware
>> [ 2.703690] Creating 2 MTD partitions on "firmware":
>> [ 2.708648] 0x000000000000-0x0000001ee085 : "kernel"
>> [ 2.714719] 0x0000001ee085-0x000001fb0000 : "rootfs"
>> [ 2.720707] mtd: device 5 (rootfs) set to be root filesystem
>> [ 2.726481] 1 squashfs-split partitions found on MTD device rootfs
>> [ 2.732675] Creating 1 MTD partitions on "rootfs":
>> [ 2.737458] 0x000000301f7b-0x000001dc1f7b : "rootfs_data"
>> [ 2.744522] libphy: Fixed MDIO Bus: probed
>> [ 2.812601] libphy: mdio: probed
>> [ 4.216935] mtk_soc_eth 1e100000.ethernet: loaded mt7530 driver
>> [ 4.223693] mtk_soc_eth 1e100000.ethernet eth0: mediatek frame engine at
>> 0xbe100000, irq 22
>> [ 4.234981] NET: Registered protocol family 10
>> [ 4.241266] Segment Routing with IPv6
>> [ 4.245029] NET: Registered protocol family 17
>> [ 4.249517] 8021q: 802.1Q VLAN Support v1.8
>> [ 4.256516] hctosys: unable to open rtc device (rtc0)
>> [ 4.268945] VFS: Mounted root (squashfs filesystem) readonly on device
>> 31:5.
>> [ 4.280996] Freeing unused kernel memory: 1236K
>> [ 4.285530] This architecture does not have kernel memory protection.
>> [ 5.081003] init: Console is alive
>> [ 5.084684] init: - watchdog -
>> [ 6.517665] mtk_soc_eth 1e100000.ethernet eth0: port 1 link up
>> [ 7.139026] kmodloader: loading kernel modules from
>> /etc/modules-boot.d/*
>> [ 7.294061] usbcore: registered new interface driver usbfs
>> [ 7.299662] usbcore: registered new interface driver hub
>> [ 7.305276] usbcore: registered new device driver usb
>> [ 7.358336] SCSI subsystem initialized
>> [ 7.374839] libata version 3.00 loaded.
>> [ 7.378342] bus=0x3, slot = 0x2, irq=0x0
>> [ 7.382417] ahci 0000:03:00.0: version 3.0
>> [ 7.382596] ahci 0000:03:00.0: SSS flag set, parallel bus scan disabled
>> [ 7.389239] ahci 0000:03:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps
>> 0x3 impl IDE mode
>> [ 7.397240] ahci 0000:03:00.0: flags: 64bit ncq sntf stag led clo pmp
>> pio slum part ccc sxs [ 7.407968] scsi host0: ahci
>> [ 7.411615] scsi host1: ahci
>> [ 7.414789] ata1: SATA max UDMA/133 abar m512 at 0x60300000 port 0x60300100
>> irq 26
>> [ 7.422101] ata2: SATA max UDMA/133 abar m512 at 0x60300000 port 0x60300180
>> irq 26
>> [ 7.770593] ata1: SATA link down (SStatus 0 SControl 300)
>> [ 8.110583] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>> [ 8.117043] ata2.00: ATA-9: WDC WDS120G2G0A-00JH30, UE450000, max
>> UDMA/133
>> [ 8.123907] ata2.00: 234455040 sectors, multi 1: LBA48 NCQ (depth 31/32)
>> [ 8.136074] ata2.00: configured for UDMA/133
>> [ 8.141072] scsi 1:0:0:0: Direct-Access ATA WDC WDS120G2G0A-
>> 0000 PQ: 0 ANSI: 5
>> [ 8.151374] sd 1:0:0:0: [sda] 234455040 512-byte logical blocks: (120
>> GB/112 GiB)
>> [ 8.158945] sd 1:0:0:0: [sda] Write Protect is off
>> [ 8.163738] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
>> [ 8.163930] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled,
>> doesn't support DPO or FUA
>> [ 8.175472] sda: sda1
>> [ 8.179936] sd 1:0:0:0: [sda] Attached SCSI disk
>> [ 8.191138] xhci-mtk 1e1c0000.xhci: 1e1c0000.xhci supply vbus not found,
>> using dummy regulator
>> [ 8.199866] xhci-mtk 1e1c0000.xhci: 1e1c0000.xhci supply vusb33 not
>> found, using dummy regulator
>> [ 8.208828] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
>> [ 8.214173] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus
>> number 1
>> [ 8.230756] xhci-mtk 1e1c0000.xhci: hcc params 0x01401198 hci version
>> 0x96 quirks 0x0000000000210010
>> [ 8.239939] xhci-mtk 1e1c0000.xhci: irq 21, io mem 0x1e1c0000
>> [ 8.246713] hub 1-0:1.0: USB hub found
>> [ 8.250640] hub 1-0:1.0: 2 ports detected
>> [ 8.255263] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
>> [ 8.260669] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus
>> number 2
>> [ 8.268136] xhci-mtk 1e1c0000.xhci: Host supports USB 3.0 SuperSpeed
>> [ 8.274792] usb usb2: We don't know the algorithms for LPM for this
>> host, disabling LPM.
>> [ 8.283784] hub 2-0:1.0: USB hub found
>> [ 8.287609] hub 2-0:1.0: 1 port detected
>> [ 8.364965] kmodloader: done loading kernel modules from
>> /etc/modules-boot.d/*
>> [ 8.380970] init: - preinit -
>> [ 8.410283] mmc0: new high speed SDHC card at address 0001
>> [ 8.416874] mmcblk0: mmc0:0001 SD16G 14.5 GiB [ 8.422931] mmcblk0:
>> p1
>> [ 8.770627] usb 1-2: new high-speed USB device number 2 using xhci-mtk
>> [ 8.990032] random: procd: uninitialized urandom read (4 bytes read)
>> [ 9.591926] mtk_soc_eth 1e100000.ethernet: PPE started
>> [ 13.968763] jffs2: notice: (560) jffs2_build_xattr_subsystem: complete
>> building xattr subsystem, 3 of xdatum (0 unchecked, 1 orphan) and 3 of xref
>> (1 dead, 0 orphan) found.
>> [ 13.986700] mount_root: switching to jffs2 overlay
>> [ 14.022588] overlayfs: upper fs does not support tmpfile.
>> [ 14.034779] urandom-seed: Seeding with /etc/urandom.seed
>> [ 14.119024] mtk_soc_eth 1e100000.ethernet: 0x100 = 0x6060000c, 0x10c =
>> 0x80818
>> [ 14.134986] procd: - early -
>> [ 14.137975] procd: - watchdog -
>> [ 14.284751] random: crng init done
>> [ 14.810827] procd: - watchdog -
>> [ 14.814343] procd: - ubus -
>> [ 14.876562] procd: - init -
>> [ 17.368834] kmodloader: loading kernel modules from /etc/modules.d/*
>> [ 17.396659] tun: Universal TUN/TAP device driver, 1.6
>> [ 17.419381] ip6_tables: (C) 2000-2006 Netfilter Core Team
>> [ 17.443499] usbcore: registered new interface driver cdc_wdm
>> [ 17.452781] Loading modules backported from Linux version
>> v5.4-rc8-0-gaf42d3466bdc
>> [ 17.460344] Backport generated by backports.git v5.4-rc8-1-0-g368e8c51
>> [ 17.471732] ip_tables: (C) 2000-2006 Netfilter Core Team
>> [ 17.492855] nf_conntrack version 0.5.0 (8192 buckets, 32768 max)
>> [ 17.555205] urngd: v1.0.2 started.
>> [ 17.568477] usbcore: registered new interface driver usbserial
>> [ 17.574648] usbcore: registered new interface driver usbserial_generic
>> [ 17.581394] usbserial: USB Serial support registered for generic
>> [ 17.595893] wireguard: WireGuard 0.0.20200215 loaded. See
>> www.wireguard.com for information.
>> [ 17.604380] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld
>> <Jason at zx2c4.com>. All Rights Reserved.
>> [ 17.634409] xt_time: kernel timezone is -0000
>> [ 17.755582] bus=0x1, slot = 0x0, irq=0xff
>> [ 17.759851] mt7603e 0000:01:00.0: ASIC revision: 76030010
>> [ 19.202019] mt7603e 0000:01:00.0: Firmware Version: ap_pcie
>> [ 19.207594] mt7603e 0000:01:00.0: Build Time: 20160107100755
>> [ 19.250580] mt7603e 0000:01:00.0: firmware init done
>> [ 19.419817] ieee80211 phy0: Selected rate control algorithm
>> 'minstrel_ht'
>> [ 19.438522] bus=0x2, slot = 0x1, irq=0xff
>> [ 19.442938] mt76x2e 0000:02:00.0: ASIC revision: 76120044
>> [ 20.242838] mt76x2e 0000:02:00.0: ROM patch build: 20141115060606a
>> [ 20.252627] mt76x2e 0000:02:00.0: Firmware Version: 0.0.00
>> [ 20.258119] mt76x2e 0000:02:00.0: Build: 1
>> [ 20.262265] mt76x2e 0000:02:00.0: Build Time: 201507311614____
>> [ 20.290569] mt76x2e 0000:02:00.0: Firmware running!
>> [ 20.298547] ieee80211 phy1: Selected rate control algorithm
>> 'minstrel_ht'
>> [ 20.306087] PPP generic driver version 2.4.2
>> [ 20.312296] NET: Registered protocol family 24
>> [ 20.320725] qmi_wwan 1-2:1.4: cdc-wdm0: USB WDM device
>> [ 20.328030] qmi_wwan 1-2:1.4 wwan0: register 'qmi_wwan' at
>> usb-1e1c0000.xhci-2, WWAN/QMI device, 22:7f:81:5d:34:75
>> [ 20.338730] usbcore: registered new interface driver qmi_wwan
>> [ 20.348443] usbcore: registered new interface driver option
>> [ 20.354278] usbserial: USB Serial support registered for GSM modem
>> (1-port)
>> [ 20.361751] option 1-2:1.0: GSM modem (1-port) converter detected
>> [ 20.368264] usb 1-2: GSM modem (1-port) converter now attached to
>> ttyUSB0
>> [ 20.375698] option 1-2:1.1: GSM modem (1-port) converter detected
>> [ 20.382345] usb 1-2: GSM modem (1-port) converter now attached to
>> ttyUSB1
>> [ 20.389722] option 1-2:1.2: GSM modem (1-port) converter detected
>> [ 20.396328] usb 1-2: GSM modem (1-port) converter now attached to
>> ttyUSB2
>> [ 20.403725] option 1-2:1.3: GSM modem (1-port) converter detected
>> [ 20.410289] usb 1-2: GSM modem (1-port) converter now attached to
>> ttyUSB3
>> [ 20.420910] kmodloader: done loading kernel modules from
>> /etc/modules.d/*
>> [ 38.651152] mtk_soc_eth 1e100000.ethernet: PPE started
>> [ 38.662679] br-lan: port 1(eth0.1) entered blocking state
>> [ 38.668153] br-lan: port 1(eth0.1) entered disabled state
>> [ 38.674180] device eth0.1 entered promiscuous mode
>> [ 38.679063] device eth0 entered promiscuous mode
>> [ 38.691079] br-lan: port 1(eth0.1) entered blocking state
>> [ 38.696492] br-lan: port 1(eth0.1) entered forwarding state
>> [ 38.702402] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
>> [ 39.722362] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
>> [ 84.740892] jffs2: Erase at 0x01ab0000 failed immediately: errno -22
>> [ 1586.828986] F2FS-fs (sda1): Found nat_bits in checkpoint
>> [ 1595.128977] F2FS-fs (sda1): Mounted with checkpoint version = 35fafab1
>>
>>
>>
>
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list