[OpenWrt-Devel] jffs2: Erase at 0x01ab0000 failed immediately: errno -22 on ZBT-WG3526 (32M)
Enrico Mioso
mrkiko.rs at gmail.com
Sun Mar 1 21:44:38 EST 2020
Ok guys, the error rpeats itself, and jffs2 seems to get corrupted. And even erasing the mtd6 device fails at some point.
Even the F2FS filesystem on the internal SSD does corrupt. This remembers me the issue I was having when using the GnuBee PC 1 some time ago.
any help would be really apreciated.
Enrico
On Mon, 2 Mar 2020, Enrico Mioso wrote:
> Date: Mon, 2 Mar 2020 03:20:40
> From: Enrico Mioso <mrkiko.rs at gmail.com>
> To: openwrt-devel at lists.openwrt.org
> Subject: jffs2: Erase at 0x01ab0000 failed immediately: errno -22 on
> ZBT-WG3526 (32M)
>
> Hi! I flashed OpenWRt master (commit
> 4349d4c6823bfe09caabbdd3c9a65198addc76d6) on this device. All seems to work
> fine, but I sawthis in the dmesg.
>
> should I worry about my flash chip?
> thank you guys!!
>
> Enrico
>
> config.buildinfo:
>
> CONFIG_TARGET_ramips=y
> CONFIG_TARGET_ramips_mt7621=y
> CONFIG_TARGET_ramips_mt7621_DEVICE_zbtlink_zbt-wg3526-32m=y
> CONFIG_FEED_luci=y
> CONFIG_FEED_packages=y
> CONFIG_FEED_routing=y
> CONFIG_FEED_telephony=y
> CONFIG_IMAGEOPT=y
> # CONFIG_KERNEL_CRASHLOG is not set
> CONFIG_KERNEL_MIPS_FPU_EMULATOR=y
> CONFIG_KERNEL_MIPS_FP_SUPPORT=y
> # CONFIG_KERNEL_SWAP is not set
> CONFIG_PACKAGE_ip-tiny=y
> CONFIG_PACKAGE_kmod-crypto-crc32=y
> CONFIG_PACKAGE_kmod-crypto-crc32c=y
> CONFIG_PACKAGE_kmod-crypto-hash=y
> CONFIG_PACKAGE_kmod-fs-ext4=y
> CONFIG_PACKAGE_kmod-fs-f2fs=y
> CONFIG_PACKAGE_kmod-fs-vfat=y
> CONFIG_PACKAGE_kmod-lib-crc16=y
> CONFIG_PACKAGE_kmod-mii=y
> CONFIG_PACKAGE_kmod-nls-cp437=y
> CONFIG_PACKAGE_kmod-nls-iso8859-1=y
> CONFIG_PACKAGE_kmod-nls-utf8=y
> CONFIG_PACKAGE_kmod-tun=y
> CONFIG_PACKAGE_kmod-udptunnel4=y
> CONFIG_PACKAGE_kmod-udptunnel6=y
> CONFIG_PACKAGE_kmod-usb-net=y
> CONFIG_PACKAGE_kmod-usb-net-qmi-wwan=y
> CONFIG_PACKAGE_kmod-usb-serial=y
> CONFIG_PACKAGE_kmod-usb-serial-option=y
> CONFIG_PACKAGE_kmod-usb-serial-qualcomm=m
> CONFIG_PACKAGE_kmod-usb-serial-wwan=y
> CONFIG_PACKAGE_kmod-usb-wdm=y
> CONFIG_PACKAGE_kmod-wireguard=y
> CONFIG_PACKAGE_wireguard=y
> CONFIG_PACKAGE_wireguard-tools=y
>
> full dmesg:
> [ 0.000000] Linux version 4.14.171 (mrkiko at mStation) (gcc version 8.3.0
> (OpenWrt GCC 8.3.0 r12417-4349d4c682)) #0 SMP Sun Mar 1 22:39:27 2020
> [ 0.000000] SoC Type: MediaTek MT7621 ver:1 eco:3
> [ 0.000000] bootconsole [early0] enabled
> [ 0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc)
> [ 0.000000] MIPS: machine is Zbtlink ZBT-WG3526 (32M)
> [ 0.000000] Determined physical RAM map:
> [ 0.000000] memory: 1c000000 @ 00000000 (usable)
> [ 0.000000] memory: 04000000 @ 20000000 (usable)
> [ 0.000000] Initrd not found or empty - disabling initrd
> [ 0.000000] VPE topology {2,2} total 4
> [ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32
> bytes.
> [ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32
> bytes
> [ 0.000000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
> [ 0.000000] Zone ranges:
> [ 0.000000] Normal [mem 0x0000000000000000-0x000000000fffffff]
> [ 0.000000] HighMem [mem 0x0000000010000000-0x0000000023ffffff]
> [ 0.000000] Movable zone start for each node
> [ 0.000000] Early memory node ranges
> [ 0.000000] node 0: [mem 0x0000000000000000-0x000000001bffffff]
> [ 0.000000] node 0: [mem 0x0000000020000000-0x0000000023ffffff]
> [ 0.000000] Initmem setup node 0 [mem
> 0x0000000000000000-0x0000000023ffffff]
> [ 0.000000] On node 0 totalpages: 131072
> [ 0.000000] free_area_init_node: node 0, pgdat 805f8360, node_mem_map
> 81003000
> [ 0.000000] Normal zone: 576 pages used for memmap
> [ 0.000000] Normal zone: 0 pages reserved
> [ 0.000000] Normal zone: 65536 pages, LIFO batch:15
> [ 0.000000] HighMem zone: 65536 pages, LIFO batch:15
> [ 0.000000] random: get_random_bytes called from start_kernel+0x9c/0x4d8
> with crng_init=0
> [ 0.000000] percpu: Embedded 14 pages/cpu s26544 r8192 d22608 u57344
> [ 0.000000] pcpu-alloc: s26544 r8192 d22608 u57344 alloc=14*4096
> [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1
> zonelists, mobility grouping on. Total pages: 130496
> [ 0.000000] Kernel command line: console=ttyS0,115200
> rootfstype=squashfs,jffs2
> [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
> [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072
> bytes)
> [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
> [ 0.000000] Writing ErrCtl register=0001aa20
> [ 0.000000] Readback ErrCtl register=0001aa20
> [ 0.000000] Memory: 510976K/524288K available (4819K kernel code, 244K
> rwdata, 1048K rodata, 1236K init, 253K bss, 13312K reserved, 0K cma-reserved,
> 262144K highmem)
> [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
> [ 0.000000] Hierarchical RCU implementation.
> [ 0.000000] NR_IRQS: 256
> [ 0.000000] CPU Clock: 880MHz
> [ 0.000000] clocksource: GIC: mask: 0xffffffffffffffff max_cycles:
> 0xcaf478abb4, max_idle_ns: 440795247997 ns
> [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff,
> max_idle_ns: 4343773742 ns
> [ 0.000010] sched_clock: 32 bits at 440MHz, resolution 2ns, wraps every
> 4880645118ns
> [ 0.007824] Calibrating delay loop... 586.13 BogoMIPS (lpj=2930688)
> [ 0.073981] pid_max: default: 32768 minimum: 301
> [ 0.078798] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
> [ 0.085307] Mountpoint-cache hash table entries: 1024 (order: 0, 4096
> bytes)
> [ 0.094587] Hierarchical SRCU implementation.
> [ 0.099822] smp: Bringing up secondary CPUs ...
> [ 0.105966] Primary instruction cache 32kB, VIPT, 4-way, linesize 32
> bytes.
> [ 0.105975] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32
> bytes
> [ 0.105987] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
> [ 0.106134] CPU1 revision is: 0001992f (MIPS 1004Kc)
> [ 0.164579] Synchronize counters for CPU 1: done.
> [ 0.206013] Primary instruction cache 32kB, VIPT, 4-way, linesize 32
> bytes.
> [ 0.206021] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32
> bytes
> [ 0.206030] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
> [ 0.206106] CPU2 revision is: 0001992f (MIPS 1004Kc)
> [ 0.255787] Synchronize counters for CPU 2: done.
> [ 0.287157] Primary instruction cache 32kB, VIPT, 4-way, linesize 32
> bytes.
> [ 0.287165] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32
> bytes
> [ 0.287173] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
> [ 0.287253] CPU3 revision is: 0001992f (MIPS 1004Kc)
> [ 0.340970] Synchronize counters for CPU 3: done.
> [ 0.370844] smp: Brought up 1 node, 4 CPUs
> [ 0.379150] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff,
> max_idle_ns: 19112604462750000 ns
> [ 0.388958] futex hash table entries: 1024 (order: 3, 32768 bytes)
> [ 0.395386] pinctrl core: initialized pinctrl subsystem
> [ 0.402163] NET: Registered protocol family 16
> [ 0.417708] FPU Affinity set after 11720 emulations
> [ 0.419274] pull PCIe RST: RALINK_RSTCTRL = 0
> [ 0.723989] release PCIe RST: RALINK_RSTCTRL = 7000000
> [ 0.729022] ***** Xtal 40MHz *****
> [ 0.732396] release PCIe RST: RALINK_RSTCTRL = 7000000
> [ 0.737502] Port 0 N_FTS = 1b105000
> [ 0.740944] Port 1 N_FTS = 1b105000
> [ 0.744404] Port 2 N_FTS = 1b105000
> [ 1.899350] -> 21007f2
> [ 1.901704] PCIE0 enabled
> [ 1.904298] PCIE1 enabled
> [ 1.906887] PCIE2 enabled
> [ 1.909509] PCI host bridge /pcie at 1e140000 ranges:
> [ 1.914254] MEM 0x0000000060000000..0x000000006fffffff
> [ 1.919420] IO 0x000000001e160000..0x000000001e16ffff
> [ 1.924629] PCI coherence region base: 0xbfbf8000, mask/settings:
> 0x60000000
> [ 1.941857] mt7621_gpio 1e000600.gpio: registering 32 gpios
> [ 1.947712] mt7621_gpio 1e000600.gpio: registering 32 gpios
> [ 1.953491] mt7621_gpio 1e000600.gpio: registering 32 gpios
> [ 1.960794] i2c-mt7621 1e000900.i2c: clock 100KHz, re-start not support
> [ 1.967960] PCI host bridge to bus 0000:00
> [ 1.972045] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff]
> [ 1.978812] pci_bus 0000:00: root bus resource [io 0xffffffff]
> [ 1.984709] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
> [ 1.991433] pci_bus 0000:00: No busn resource found for root bus, will use
> [bus 00-ff]
> [ 1.999368] pci 0000:00:00.0: [0e8d:0801] type 01 class 0x060400
> [ 1.999411] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x7fffffff]
> [ 1.999423] pci 0000:00:00.0: reg 0x14: [mem 0x60500000-0x6050ffff]
> [ 1.999490] pci 0000:00:00.0: supports D1
> [ 1.999499] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
> [ 1.999757] pci 0000:00:01.0: [0e8d:0801] type 01 class 0x060400
> [ 1.999796] pci 0000:00:01.0: reg 0x10: [mem 0x00000000-0x7fffffff]
> [ 1.999816] pci 0000:00:01.0: reg 0x14: [mem 0x60510000-0x6051ffff]
> [ 1.999882] pci 0000:00:01.0: supports D1
> [ 1.999892] pci 0000:00:01.0: PME# supported from D0 D1 D3hot
> [ 2.000115] pci 0000:00:02.0: [0e8d:0801] type 01 class 0x060400
> [ 2.000165] pci 0000:00:02.0: reg 0x10: [mem 0x00000000-0x7fffffff]
> [ 2.000183] pci 0000:00:02.0: reg 0x14: [mem 0x60520000-0x6052ffff]
> [ 2.000245] pci 0000:00:02.0: supports D1
> [ 2.000254] pci 0000:00:02.0: PME# supported from D0 D1 D3hot
> [ 2.000748] pci 0000:01:00.0: [14c3:7603] type 00 class 0x028000
> [ 2.000808] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x000fffff]
> [ 2.000945] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
> [ 2.001153] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
> [ 2.001419] pci 0000:02:00.0: [14c3:7662] type 00 class 0x028000
> [ 2.001485] pci 0000:02:00.0: reg 0x10: [mem 0x00000000-0x000fffff 64bit]
> [ 2.001533] pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
> [ 2.001627] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
> [ 2.001838] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
> [ 2.002102] pci 0000:03:00.0: [1b21:0611] type 00 class 0x010185
> [ 2.002159] pci 0000:03:00.0: reg 0x10: [io 0x0000-0x0007]
> [ 2.002180] pci 0000:03:00.0: reg 0x14: [io 0x0000-0x0003]
> [ 2.002196] pci 0000:03:00.0: reg 0x18: [io 0x0000-0x0007]
> [ 2.002211] pci 0000:03:00.0: reg 0x1c: [io 0x0000-0x0003]
> [ 2.002226] pci 0000:03:00.0: reg 0x20: [io 0x0000-0x000f]
> [ 2.002243] pci 0000:03:00.0: reg 0x24: [mem 0x00000000-0x000001ff]
> [ 2.002258] pci 0000:03:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
> [ 2.002540] pci_bus 0000:03: busn_res: [bus 03-ff] end is updated to 03
> [ 2.002567] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 03
> [ 2.002672] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000]
> [ 2.009184] pci 0000:00:00.0: BAR 0: failed to assign [mem size
> 0x80000000]
> [ 2.016154] pci 0000:00:01.0: BAR 0: no space for [mem size 0x80000000]
> [ 2.022661] pci 0000:00:01.0: BAR 0: failed to assign [mem size
> 0x80000000]
> [ 2.029599] pci 0000:00:02.0: BAR 0: no space for [mem size 0x80000000]
> [ 2.036146] pci 0000:00:02.0: BAR 0: failed to assign [mem size
> 0x80000000]
> [ 2.043082] pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff]
> [ 2.049796] pci 0000:00:01.0: BAR 8: assigned [mem 0x60100000-0x601fffff]
> [ 2.056554] pci 0000:00:01.0: BAR 9: assigned [mem 0x60200000-0x602fffff
> pref]
> [ 2.063704] pci 0000:00:02.0: BAR 8: assigned [mem 0x60300000-0x603fffff]
> [ 2.070468] pci 0000:00:02.0: BAR 9: assigned [mem 0x60400000-0x604fffff
> pref]
> [ 2.077622] pci 0000:00:00.0: BAR 1: assigned [mem 0x60500000-0x6050ffff]
> [ 2.084385] pci 0000:00:01.0: BAR 1: assigned [mem 0x60510000-0x6051ffff]
> [ 2.091099] pci 0000:00:02.0: BAR 1: assigned [mem 0x60520000-0x6052ffff]
> [ 2.097858] pci 0000:00:02.0: BAR 7: no space for [io size 0x1000]
> [ 2.104050] pci 0000:00:02.0: BAR 7: failed to assign [io size 0x1000]
> [ 2.110649] pci 0000:01:00.0: BAR 0: assigned [mem 0x60000000-0x600fffff]
> [ 2.117367] pci 0000:00:00.0: PCI bridge to [bus 01]
> [ 2.122309] pci 0000:00:00.0: bridge window [mem 0x60000000-0x600fffff]
> [ 2.129034] pci 0000:02:00.0: BAR 0: assigned [mem 0x60100000-0x601fffff
> 64bit]
> [ 2.136311] pci 0000:02:00.0: BAR 6: assigned [mem 0x60200000-0x6020ffff
> pref]
> [ 2.143449] pci 0000:00:01.0: PCI bridge to [bus 02]
> [ 2.148397] pci 0000:00:01.0: bridge window [mem 0x60100000-0x601fffff]
> [ 2.155113] pci 0000:00:01.0: bridge window [mem 0x60200000-0x602fffff
> pref]
> [ 2.162321] pci 0000:03:00.0: BAR 6: assigned [mem 0x60400000-0x6040ffff
> pref]
> [ 2.169461] pci 0000:03:00.0: BAR 5: assigned [mem 0x60300000-0x603001ff]
> [ 2.176239] pci 0000:03:00.0: BAR 4: no space for [io size 0x0010]
> [ 2.182415] pci 0000:03:00.0: BAR 4: failed to assign [io size 0x0010]
> [ 2.189015] pci 0000:03:00.0: BAR 0: no space for [io size 0x0008]
> [ 2.195202] pci 0000:03:00.0: BAR 0: failed to assign [io size 0x0008]
> [ 2.201791] pci 0000:03:00.0: BAR 2: no space for [io size 0x0008]
> [ 2.207994] pci 0000:03:00.0: BAR 2: failed to assign [io size 0x0008]
> [ 2.214583] pci 0000:03:00.0: BAR 1: no space for [io size 0x0004]
> [ 2.220778] pci 0000:03:00.0: BAR 1: failed to assign [io size 0x0004]
> [ 2.227363] pci 0000:03:00.0: BAR 3: no space for [io size 0x0004]
> [ 2.233573] pci 0000:03:00.0: BAR 3: failed to assign [io size 0x0004]
> [ 2.240152] pci 0000:00:02.0: PCI bridge to [bus 03]
> [ 2.245057] pci 0000:00:02.0: bridge window [mem 0x60300000-0x603fffff]
> [ 2.251823] pci 0000:00:02.0: bridge window [mem 0x60400000-0x604fffff
> pref]
> [ 2.260578] clocksource: Switched to clocksource GIC
> [ 2.267445] NET: Registered protocol family 2
> [ 2.272412] TCP established hash table entries: 2048 (order: 1, 8192
> bytes)
> [ 2.279294] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
> [ 2.285758] TCP: Hash tables configured (established 2048 bind 2048)
> [ 2.292181] UDP hash table entries: 256 (order: 1, 8192 bytes)
> [ 2.297953] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
> [ 2.304453] NET: Registered protocol family 1
> [ 2.308785] PCI: CLS 0 bytes, default 32
> [ 2.540520] 4 CPUs re-calibrate udelay(lpj = 2924544)
> [ 2.547457] workingset: timestamp_bits=14 max_order=17 bucket_order=3
> [ 2.560344] random: fast init done
> [ 2.561698] squashfs: version 4.0 (2009/01/31) Phillip Lougher
> [ 2.569467] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME)
> (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
> [ 2.583068] bounce: pool size: 64 pages
> [ 2.586843] io scheduler noop registered
> [ 2.590753] io scheduler deadline registered (default)
> [ 2.596839] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled
> [ 2.604556] console [ttyS0] disabled
> [ 2.608110] 1e000c00.uartlite: ttyS0 at MMIO 0x1e000c00 (irq = 19,
> base_baud = 3125000) is a 16550A
> [ 2.617182] console [ttyS0] enabled
> [ 2.624065] bootconsole [early0] disabled
> [ 2.634362] MediaTek Nand driver init, version v2.1 Fix AHB virt2phys
> error
> [ 2.641781] spi-mt7621 1e000b00.spi: sys_freq: 220000000
> [ 2.656954] m25p80 spi0.0: w25q256 (32768 Kbytes)
> [ 2.661740] 4 fixed-partitions partitions found on MTD device spi0.0
> [ 2.668061] Creating 4 MTD partitions on "spi0.0":
> [ 2.672858] 0x000000000000-0x000000030000 : "u-boot"
> [ 2.678933] 0x000000030000-0x000000040000 : "u-boot-env"
> [ 2.685304] 0x000000040000-0x000000050000 : "factory"
> [ 2.691398] 0x000000050000-0x000002000000 : "firmware"
> [ 2.697705] 2 uimage-fw partitions found on MTD device firmware
> [ 2.703690] Creating 2 MTD partitions on "firmware":
> [ 2.708648] 0x000000000000-0x0000001ee085 : "kernel"
> [ 2.714719] 0x0000001ee085-0x000001fb0000 : "rootfs"
> [ 2.720707] mtd: device 5 (rootfs) set to be root filesystem
> [ 2.726481] 1 squashfs-split partitions found on MTD device rootfs
> [ 2.732675] Creating 1 MTD partitions on "rootfs":
> [ 2.737458] 0x000000301f7b-0x000001dc1f7b : "rootfs_data"
> [ 2.744522] libphy: Fixed MDIO Bus: probed
> [ 2.812601] libphy: mdio: probed
> [ 4.216935] mtk_soc_eth 1e100000.ethernet: loaded mt7530 driver
> [ 4.223693] mtk_soc_eth 1e100000.ethernet eth0: mediatek frame engine at
> 0xbe100000, irq 22
> [ 4.234981] NET: Registered protocol family 10
> [ 4.241266] Segment Routing with IPv6
> [ 4.245029] NET: Registered protocol family 17
> [ 4.249517] 8021q: 802.1Q VLAN Support v1.8
> [ 4.256516] hctosys: unable to open rtc device (rtc0)
> [ 4.268945] VFS: Mounted root (squashfs filesystem) readonly on device
> 31:5.
> [ 4.280996] Freeing unused kernel memory: 1236K
> [ 4.285530] This architecture does not have kernel memory protection.
> [ 5.081003] init: Console is alive
> [ 5.084684] init: - watchdog -
> [ 6.517665] mtk_soc_eth 1e100000.ethernet eth0: port 1 link up
> [ 7.139026] kmodloader: loading kernel modules from /etc/modules-boot.d/*
> [ 7.294061] usbcore: registered new interface driver usbfs
> [ 7.299662] usbcore: registered new interface driver hub
> [ 7.305276] usbcore: registered new device driver usb
> [ 7.358336] SCSI subsystem initialized
> [ 7.374839] libata version 3.00 loaded.
> [ 7.378342] bus=0x3, slot = 0x2, irq=0x0
> [ 7.382417] ahci 0000:03:00.0: version 3.0
> [ 7.382596] ahci 0000:03:00.0: SSS flag set, parallel bus scan disabled
> [ 7.389239] ahci 0000:03:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3
> impl IDE mode
> [ 7.397240] ahci 0000:03:00.0: flags: 64bit ncq sntf stag led clo pmp pio
> slum part ccc sxs [ 7.407968] scsi host0: ahci
> [ 7.411615] scsi host1: ahci
> [ 7.414789] ata1: SATA max UDMA/133 abar m512 at 0x60300000 port 0x60300100
> irq 26
> [ 7.422101] ata2: SATA max UDMA/133 abar m512 at 0x60300000 port 0x60300180
> irq 26
> [ 7.770593] ata1: SATA link down (SStatus 0 SControl 300)
> [ 8.110583] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
> [ 8.117043] ata2.00: ATA-9: WDC WDS120G2G0A-00JH30, UE450000, max UDMA/133
> [ 8.123907] ata2.00: 234455040 sectors, multi 1: LBA48 NCQ (depth 31/32)
> [ 8.136074] ata2.00: configured for UDMA/133
> [ 8.141072] scsi 1:0:0:0: Direct-Access ATA WDC WDS120G2G0A- 0000
> PQ: 0 ANSI: 5
> [ 8.151374] sd 1:0:0:0: [sda] 234455040 512-byte logical blocks: (120
> GB/112 GiB)
> [ 8.158945] sd 1:0:0:0: [sda] Write Protect is off
> [ 8.163738] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
> [ 8.163930] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled,
> doesn't support DPO or FUA
> [ 8.175472] sda: sda1
> [ 8.179936] sd 1:0:0:0: [sda] Attached SCSI disk
> [ 8.191138] xhci-mtk 1e1c0000.xhci: 1e1c0000.xhci supply vbus not found,
> using dummy regulator
> [ 8.199866] xhci-mtk 1e1c0000.xhci: 1e1c0000.xhci supply vusb33 not found,
> using dummy regulator
> [ 8.208828] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
> [ 8.214173] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus
> number 1
> [ 8.230756] xhci-mtk 1e1c0000.xhci: hcc params 0x01401198 hci version 0x96
> quirks 0x0000000000210010
> [ 8.239939] xhci-mtk 1e1c0000.xhci: irq 21, io mem 0x1e1c0000
> [ 8.246713] hub 1-0:1.0: USB hub found
> [ 8.250640] hub 1-0:1.0: 2 ports detected
> [ 8.255263] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
> [ 8.260669] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus
> number 2
> [ 8.268136] xhci-mtk 1e1c0000.xhci: Host supports USB 3.0 SuperSpeed
> [ 8.274792] usb usb2: We don't know the algorithms for LPM for this host,
> disabling LPM.
> [ 8.283784] hub 2-0:1.0: USB hub found
> [ 8.287609] hub 2-0:1.0: 1 port detected
> [ 8.364965] kmodloader: done loading kernel modules from
> /etc/modules-boot.d/*
> [ 8.380970] init: - preinit -
> [ 8.410283] mmc0: new high speed SDHC card at address 0001
> [ 8.416874] mmcblk0: mmc0:0001 SD16G 14.5 GiB [ 8.422931] mmcblk0: p1
> [ 8.770627] usb 1-2: new high-speed USB device number 2 using xhci-mtk
> [ 8.990032] random: procd: uninitialized urandom read (4 bytes read)
> [ 9.591926] mtk_soc_eth 1e100000.ethernet: PPE started
> [ 13.968763] jffs2: notice: (560) jffs2_build_xattr_subsystem: complete
> building xattr subsystem, 3 of xdatum (0 unchecked, 1 orphan) and 3 of xref
> (1 dead, 0 orphan) found.
> [ 13.986700] mount_root: switching to jffs2 overlay
> [ 14.022588] overlayfs: upper fs does not support tmpfile.
> [ 14.034779] urandom-seed: Seeding with /etc/urandom.seed
> [ 14.119024] mtk_soc_eth 1e100000.ethernet: 0x100 = 0x6060000c, 0x10c =
> 0x80818
> [ 14.134986] procd: - early -
> [ 14.137975] procd: - watchdog -
> [ 14.284751] random: crng init done
> [ 14.810827] procd: - watchdog -
> [ 14.814343] procd: - ubus -
> [ 14.876562] procd: - init -
> [ 17.368834] kmodloader: loading kernel modules from /etc/modules.d/*
> [ 17.396659] tun: Universal TUN/TAP device driver, 1.6
> [ 17.419381] ip6_tables: (C) 2000-2006 Netfilter Core Team
> [ 17.443499] usbcore: registered new interface driver cdc_wdm
> [ 17.452781] Loading modules backported from Linux version
> v5.4-rc8-0-gaf42d3466bdc
> [ 17.460344] Backport generated by backports.git v5.4-rc8-1-0-g368e8c51
> [ 17.471732] ip_tables: (C) 2000-2006 Netfilter Core Team
> [ 17.492855] nf_conntrack version 0.5.0 (8192 buckets, 32768 max)
> [ 17.555205] urngd: v1.0.2 started.
> [ 17.568477] usbcore: registered new interface driver usbserial
> [ 17.574648] usbcore: registered new interface driver usbserial_generic
> [ 17.581394] usbserial: USB Serial support registered for generic
> [ 17.595893] wireguard: WireGuard 0.0.20200215 loaded. See
> www.wireguard.com for information.
> [ 17.604380] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld
> <Jason at zx2c4.com>. All Rights Reserved.
> [ 17.634409] xt_time: kernel timezone is -0000
> [ 17.755582] bus=0x1, slot = 0x0, irq=0xff
> [ 17.759851] mt7603e 0000:01:00.0: ASIC revision: 76030010
> [ 19.202019] mt7603e 0000:01:00.0: Firmware Version: ap_pcie
> [ 19.207594] mt7603e 0000:01:00.0: Build Time: 20160107100755
> [ 19.250580] mt7603e 0000:01:00.0: firmware init done
> [ 19.419817] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
> [ 19.438522] bus=0x2, slot = 0x1, irq=0xff
> [ 19.442938] mt76x2e 0000:02:00.0: ASIC revision: 76120044
> [ 20.242838] mt76x2e 0000:02:00.0: ROM patch build: 20141115060606a
> [ 20.252627] mt76x2e 0000:02:00.0: Firmware Version: 0.0.00
> [ 20.258119] mt76x2e 0000:02:00.0: Build: 1
> [ 20.262265] mt76x2e 0000:02:00.0: Build Time: 201507311614____
> [ 20.290569] mt76x2e 0000:02:00.0: Firmware running!
> [ 20.298547] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
> [ 20.306087] PPP generic driver version 2.4.2
> [ 20.312296] NET: Registered protocol family 24
> [ 20.320725] qmi_wwan 1-2:1.4: cdc-wdm0: USB WDM device
> [ 20.328030] qmi_wwan 1-2:1.4 wwan0: register 'qmi_wwan' at
> usb-1e1c0000.xhci-2, WWAN/QMI device, 22:7f:81:5d:34:75
> [ 20.338730] usbcore: registered new interface driver qmi_wwan
> [ 20.348443] usbcore: registered new interface driver option
> [ 20.354278] usbserial: USB Serial support registered for GSM modem
> (1-port)
> [ 20.361751] option 1-2:1.0: GSM modem (1-port) converter detected
> [ 20.368264] usb 1-2: GSM modem (1-port) converter now attached to ttyUSB0
> [ 20.375698] option 1-2:1.1: GSM modem (1-port) converter detected
> [ 20.382345] usb 1-2: GSM modem (1-port) converter now attached to ttyUSB1
> [ 20.389722] option 1-2:1.2: GSM modem (1-port) converter detected
> [ 20.396328] usb 1-2: GSM modem (1-port) converter now attached to ttyUSB2
> [ 20.403725] option 1-2:1.3: GSM modem (1-port) converter detected
> [ 20.410289] usb 1-2: GSM modem (1-port) converter now attached to ttyUSB3
> [ 20.420910] kmodloader: done loading kernel modules from /etc/modules.d/*
> [ 38.651152] mtk_soc_eth 1e100000.ethernet: PPE started
> [ 38.662679] br-lan: port 1(eth0.1) entered blocking state
> [ 38.668153] br-lan: port 1(eth0.1) entered disabled state
> [ 38.674180] device eth0.1 entered promiscuous mode
> [ 38.679063] device eth0 entered promiscuous mode
> [ 38.691079] br-lan: port 1(eth0.1) entered blocking state
> [ 38.696492] br-lan: port 1(eth0.1) entered forwarding state
> [ 38.702402] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
> [ 39.722362] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
> [ 84.740892] jffs2: Erase at 0x01ab0000 failed immediately: errno -22
> [ 1586.828986] F2FS-fs (sda1): Found nat_bits in checkpoint
> [ 1595.128977] F2FS-fs (sda1): Mounted with checkpoint version = 35fafab1
>
>
>
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list