[OpenWrt-Devel] [lantiq] general help on AR10 platform
Enrico Mioso
mrkiko.rs at gmail.com
Tue Sep 3 04:21:32 EDT 2019
Hey there!
On Mon, 2 Sep 2019, Hauke Mehrtens wrote:
> Do you use the compatible string lantiq,ar10 for the device?
OOOOPS! Thanks!!!! Lots of work needed but still...
Eva_AVM >
........................................................................................[ 0.000000] Linux version 4.19.68 (mrkiko at mStation) (gcc version 7.4.0 (OpenWrt GCC 7.4.0 r10891-055abe902b)) #0 SMP Thu Aug 29 14:19:00 2019
[ 0.000000] SoC: xRX300 rev 1.2
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU0 revision is: 00019556 (MIPS 34Kc)
[ 0.000000] MIPS: machine is AVM FRITZ!Box 3272
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 08000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Detected 1 available secondary CPU(s)
[ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x0000000000000000-0x0000000007ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x0000000007ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff]
[ 0.000000] random: get_random_bytes called from start_kernel+0x98/0x4dc with crng_init=0
[ 0.000000] percpu: Embedded 14 pages/cpu s26256 r8192 d22896 u57344
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 32480
[ 0.000000] Kernel command line:
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Writing ErrCtl register=00050000
[ 0.000000] Readback ErrCtl register=00050000
[ 0.000000] Memory: 119044K/131072K available (5210K kernel code, 241K rwdata, 1524K rodata, 3376K init, 232K bss, 12028K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] NR_IRQS: 256
[ 0.000000] CPU Clock: 500MHz
[ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041786 ns
[ 0.000012] sched_clock: 32 bits at 250MHz, resolution 4ns, wraps every 8589934590ns
[ 0.007922] Calibrating delay loop... 332.54 BogoMIPS (lpj=665088)
[ 0.046022] pid_max: default: 32768 minimum: 301
[ 0.050995] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.057507] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.068267] rcu: Hierarchical SRCU implementation.
[ 0.076792] smp: Bringing up secondary CPUs ...
[ 0.082535] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[ 0.082551] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[ 0.082694] CPU1 revision is: 00019556 (MIPS 34Kc)
[ 0.113485] Synchronize counters for CPU 1: done.
[ 0.137848] smp: Brought up 1 node, 2 CPUs
[ 0.145295] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.154989] futex hash table entries: 512 (order: 2, 16384 bytes)
[ 0.161374] pinctrl core: initialized pinctrl subsystem
[ 0.168913] NET: Registered protocol family 16
[ 0.192153] pinctrl-xway 1e100b10.pinmux: Init done
[ 0.198381] dma-xway 1e104100.dma: Init done - hw rev: 8, ports: 5, channels: 24
[ 0.242745] usbcore: registered new interface driver usbfs
[ 0.248408] usbcore: registered new interface driver hub
[ 0.253842] usbcore: registered new device driver usb
[ 0.262539] clocksource: Switched to clocksource MIPS
[ 0.270805] NET: Registered protocol family 2
[ 0.276328] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes)
[ 0.283934] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.290964] TCP bind hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.297372] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.304011] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.309805] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.316470] NET: Registered protocol family 1
[ 0.497491] random: fast init done
[ 4.762312] gptu: totally 6 16-bit timers/counters
[ 4.767177] gptu: misc_register on minor 63
[ 4.771338] gptu: succeeded to request irq 126
[ 4.775862] gptu: succeeded to request irq 127
[ 4.780340] gptu: succeeded to request irq 128
[ 4.784898] gptu: succeeded to request irq 129
[ 4.789369] gptu: succeeded to request irq 130
[ 4.793888] gptu: succeeded to request irq 131
[ 4.798552] No VPEs reserved for AP/SP, not initialize VPE loader
[ 4.798552] Pass maxvpes=<n> argument as kernel argument
[ 4.809939] No TCs reserved for AP/SP, not initializing RTLX.
[ 4.809939] Pass maxtcs=<n> argument as kernel argument
[ 4.823144] Crashlog allocated RAM at address 0x3f00000
[ 4.828818] workingset: timestamp_bits=14 max_order=15 bucket_order=1
[ 4.853525] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 4.859312] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 4.882110] io scheduler noop registered
[ 4.886082] io scheduler deadline registered (default)
[ 4.892539] fpi-xway 10000000.fpi: can't request region for resource [mem 0x10000000-0x1fefffff]
[ 4.901331] fpi-xway: probe of 10000000.fpi failed with error -16
[ 4.908974] 1e100c00.serial: ttyLTQ0 at MMIO 0x1e100c00 (irq = 112, base_baud = 0) is a lantiq,asc
[ 4.917888] console [ttyLTQ0] enabled
[ 4.917888] console [ttyLTQ0] enabled
[ 4.925235] bootconsole [early0] disabled
[ 4.925235] bootconsole [early0] disabled
[ 4.934787] cacheinfo: Failed to find cpu0 device node
[ 4.938696] cacheinfo: Unable to detect cache hierarchy for CPU 0
[ 4.950104] libphy: Fixed MDIO Bus: probed
[ 4.956849] wdt 1f8803f0.watchdog: Init done
[ 4.963583] NET: Registered protocol family 10
[ 4.971956] Segment Routing with IPv6
[ 4.974549] NET: Registered protocol family 17
[ 4.978846] 8021q: 802.1Q VLAN Support v1.8
[ 4.998378] Freeing unused kernel memory: 3376K
[ 5.001519] This architecture does not have kernel memory protection.
[ 5.007949] Run /init as init process
[ 5.032752] init: Console is alive
[ 5.035243] init: - watchdog -
[ 5.064201] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 5.073603] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 5.089945] init: - preinit -
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
[ 8.403771] procd: - early -
[ 8.405405] procd: - watchdog -
[ 8.984982] procd: - watchdog -
[ 8.987423] procd: - ubus -
[ 8.998940] random: ubusd: uninitialized urandom read (4 bytes read)
[ 9.040099] random: ubusd: uninitialized urandom read (4 bytes read)
[ 9.045911] random: ubusd: uninitialized urandom read (4 bytes read)
[ 9.053860] procd: - init -
Please press Enter to activate this console.
[ 9.602838] kmodloader: loading kernel modules from /etc/modules.d/*
[ 9.612884] IFXOS, Version 1.5.19 (c) Copyright 2009, Lantiq Deutschland GmbH
[ 9.625395] NET: Registered protocol family 8
[ 9.628395] NET: Registered protocol family 20
[ 9.644457] PPP generic driver version 2.4.2
[ 9.698097] Lantiq (VRX) DSL CPE MEI driver, version 1.5.17.6, (c) 2007-2015 Lantiq Beteiligungs-GmbH & Co. KG
[ 9.717819]
[ 9.717819]
[ 9.717819] Lantiq CPE API Driver version: DSL CPE API V4.17.18.6
[ 9.735493]
[ 9.735493] Predefined debug level: 3
[ 9.740625] Get BSP Driver Handle Fail!
[ 9.744454] Get BSP Driver NFC Handle Fail!
[ 9.756135] urngd: v1.0.0 started.
[ 9.787304] NET: Registered protocol family 24
[ 9.809358] xt_time: kernel timezone is -0000
[ 9.871018] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 10.054261] random: crng init done
[ 10.056226] random: 7 urandom warning(s) missed due to ratelimiting
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list