[OpenWrt-Devel] [lantiq] general help on AR10 platform
Enrico Mioso
mrkiko.rs at gmail.com
Tue Sep 3 00:44:14 EDT 2019
Dear Hauke,
Thanks!!
thank you for pointing me out at the teleko-speedport source code! I will compare and look at this very soon today.
So, with your help guys, I started from the vendor code in here:
http://osp.avm.de/fritzbox/fritzbox-3272/source-files-FRITZ.Box_3272-06.20.tar.gz
And started by writing an "arx300.dtsi" ifle - comparing with Bjorn's work, who he nicely provided, pointing me at it.
And pointing out I was using the wrong ebu address.
target/linux/lantiq/files/arch/mips/boot/dts/arx300.dtsi looks like:
#include <dt-bindings/gpio/gpio.h>
/ {
#address-cells = <1>;
#size-cells = <1>;
compatible = "lantiq,xway", "lantiq,ar10";
aliases {
serial0 = &asc1;
};
chosen {
stdout-path = "serial0:115200n8";
};
cpus {
cpu at 0 {
compatible = "mips,mips34Kc";
};
cpu at 1 {
compatible = "mips,mips34Kc";
};
};
memory at 0 {
device_type = "memory";
};
cputemp at 0 {
compatible = "lantiq,cputemp";
};
biu at 1f800000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "lantiq,biu", "simple-bus";
reg = <0x1f800000 0x800000>;
ranges = <0x0 0x1f800000 0x7fffff>;
icu0: icu at 80200 {
#interrupt-cells = <1>;
interrupt-controller;
compatible = "lantiq,icu";
reg = <0x80200 0x28
0x80228 0x28
0x80250 0x28
0x80278 0x28
0x802a0 0x28>;
};
watchdog at 803f0 {
compatible = "lantiq,xrx100-wdt", "lantiq,xrx100-wdt";
reg = <0x803f0 0x10>;
regmap = <&rcu0>;
};
};
sram at 1f000000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "lantiq,sram", "simple-bus";
reg = <0x1f000000 0x800000>;
ranges = <0x0 0x1f000000 0x7fffff>;
eiu0: eiu at 101000 {
#interrupt-cells = <1>;
interrupt-controller;
compatible = "lantiq,eiu-xway";
reg = <0x101000 0x1000>;
interrupt-parent = <&icu0>;
lantiq,eiu-irqs = <166 135 66 40 41 42>;
};
pmu0: pmu at 102000 {
compatible = "lantiq,pmu-xway";
reg = <0x102000 0x1000>;
};
cgu0: cgu at 103000 {
compatible = "lantiq,cgu-xway";
reg = <0x103000 0x1000>;
};
dcdc at 106a00 {
compatible = "lantiq,dcdc-xrx200";
reg = <0x106a00 0x200>;
};
rcu0: rcu at 203000 {
compatible = "lantiq,xrx200-rcu", "simple-mfd", "syscon";
reg = <0x203000 0x100>;
ranges = <0x0 0x203000 0x100>;
big-endian;
gphy0: gphy at 20 {
compatible = "lantiq,xrx300-gphy";
reg = <0x20 0x4>;
resets = <&reset0 31 30>, <&reset1 7 7>;
reset-names = "gphy", "gphy2";
};
gphy1: gphy at 58 {
compatible = "lantiq,xrx300-gphy";
reg = <0x58 0x4>;
resets = <&reset0 29 28>, <&reset1 6 6>;
reset-names = "gphy", "gphy2";
};
gphy2: gphy at ac {
compatible = "lantiq,xrx300-gphy";
reg = <0xac 0x4>;
resets = <&reset0 27 26>, <&reset1 5 5>;
reset-names = "gphy", "gphy2";
};
reset0: reset-controller at 10 {
compatible = "lantiq,xrx200-reset";
reg = <0x10 4>, <0x14 4>;
#reset-cells = <2>;
};
reset1: reset-controller at 48 {
compatible = "lantiq,xrx200-reset";
reg = <0x48 4>, <0x24 4>;
#reset-cells = <2>;
};
usb_phy0: usb2-phy at 18 {
compatible = "lantiq,xrx300-usb2-phy";
reg = <0x18 4>, <0x38 4>;
status = "disabled";
resets = <&reset1 4 4>, <&reset0 4 4>;
reset-names = "phy", "ctrl";
#phy-cells = <0>;
};
usb_phy1: usb2-phy at 34 {
compatible = "lantiq,xrx300-usb2-phy";
reg = <0x34 4>, <0x3c 4>;
status = "disabled";
resets = <&reset1 5 4>, <&reset0 4 4>;
reset-names = "phy", "ctrl";
#phy-cells = <0>;
};
reboot at 10 {
compatible = "syscon-reboot";
reg = <0x10 4>;
regmap = <&rcu0>;
offset = <0x10>;
mask = <0xe0000000>;
};
};
};
fpi at 10000000 {
compatible = "lantiq,xrx200-fpi", "simple-bus";
ranges = <0x0 0x10000000 0xf000000>;
reg = <0x1f400000 0x1000>,
<0x10000000 0xf000000>;
regmap = <&rcu0>;
offset-endianness = <0x4c>;
#address-cells = <1>;
#size-cells = <1>;
localbus: localbus at 0 {
#address-cells = <2>;
#size-cells = <1>;
ranges = <0 0 0x0 0x3ffffff /* addrsel0 */
1 0 0x4000000 0x4000010>; /* addsel1 */
compatible = "lantiq,localbus", "simple-bus";
};
gptu at e100a00 {
compatible = "lantiq,gptu-xway";
reg = <0xe100a00 0x100>;
interrupt-parent = <&icu0>;
interrupts = <120 121 122 123 124 125>;
};
gpio: pinmux at e100b10 {
compatible = "lantiq,xrx300-pinctrl";
#gpio-cells = <2>;
gpio-controller;
reg = <0xe100b10 0xa0>;
};
stp: stp at e100bb0 {
status = "disabled";
compatible = "lantiq,gpio-stp-xway";
reg = <0xe100bb0 0x40>;
#gpio-cells = <2>;
gpio-controller;
lantiq,shadow = <0xffffff>;
lantiq,groups = <0x7>;
lantiq,dsl = <0x0>;
lantiq,phy1 = <0x0>;
lantiq,phy2 = <0x0>;
};
asc1: serial at e100c00 {
compatible = "lantiq,asc";
reg = <0xe100c00 0x400>;
interrupt-parent = <&icu0>;
interrupts = <105 107 108>;
};
deu at e103100 {
status = "disabled";
compatible = "lantiq,deu-xrx200";
reg = <0xe103100 0xf00>;
};
dma0: dma at e104100 {
compatible = "lantiq,dma-xway";
reg = <0xe104100 0x800>;
};
ebu0: ebu at 6000000 {
compatible = "lantiq,ebu-xway";
reg = <0x6000000 0x100>;
};
eth0: eth at e108000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "lantiq,xrx200-net";
reg = < 0xe108000 0x3000 /* switch */
0xe10b100 0x70 /* mdio */
0xe10b1d8 0x30 /* mii */
0xe10b308 0x30 /* pmac */
>;
interrupt-parent = <&icu0>;
interrupts = <75 73 72>;
resets = <&reset0 21 16>, <&reset0 8 8>;
reset-names = "switch", "ppe";
lantiq,phys = <&gphy0>, <&gphy1>, <&gphy2>;
};
ppe at e234000 {
compatible = "lantiq,ppe-xrx200";
interrupt-parent = <&icu0>;
interrupts = <96>;
};
};
};
target/linux/lantiq/files/arch/mips/boot/dts/FRITZ3272.dts (a placeholder for now):
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include "arx300.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/mips/lantiq_rcu_gphy.h>
/ {
compatible = "avm,fritz3272", "lantiq,xway", "lantiq,arx300";
model = "AVM FRITZ!Box 3272";
memory at 0 {
device_type = "memory";
reg = <0x0 0x8000000>;
};
};
Thank you very very much for all the help!
Enrico
On Mon, 2 Sep 2019, Hauke Mehrtens wrote:
> Date: Mon, 2 Sep 2019 20:41:29
> From: Hauke Mehrtens <hauke at hauke-m.de>
> To: Enrico Mioso <mrkiko.rs at gmail.com>, openwrt-devel at lists.openwrt.org
> Subject: Re: [OpenWrt-Devel] [lantiq] general help on AR10 platform
>
> On 9/2/19 5:38 AM, Enrico Mioso wrote:
>> Hello guys,
>> Hello Hauke,
>>
>> Sorry for the amount of mails.
>
> Did you had a look at this vendor device tree file:
> https://gitlab.com/gplmirror/telekom-speedport-w925v/blob/master/w925_1.5.001.7_opensource/extern/lantiq-bsp/ugw711-grx550/UGW-7.1.1-SW-CD/Sources/UGW-7.1.1/ugw/target/linux/lantiq/dts/xRX330.dtsi
>
> The arch code is added by these patches on top of kernel 3.10.X:
> https://gitlab.com/gplmirror/telekom-speedport-w925v/tree/master/w925_1.5.001.7_opensource/extern/lantiq-bsp/ugw711-grx550/UGW-7.1.1-SW-CD/Sources/UGW-7.1.1/ugw/target/linux/lantiq/patches-3.10
>
> The AR10 is probably partly working wih these kernel patches.
>
>> So in I patched the kernel to be more specific on PMU error messages,
>> since it seems something is fundamentally wrong here:
>> the system panics like
>>
>> [ 0.000000] SoC: xRX300 rev 1.2
>> [ 0.000000] bootconsole [early0] enabled
>
> Do you use the compatible string lantiq,ar10 for the device?
>
>> [ 0.000000] CPU0 revision is: 00019556 (MIPS 34Kc)
>> [ 0.000000] MIPS: machine is AVM FRITZ!Box 3272
>> [ 0.000000] Determined physical RAM map:
>> [ 0.000000] memory: 08000000 @ 00000000 (usable)
>> [ 0.000000] Initrd not found or empty - disabling initrd
>> [ 0.000000] Detected 1 available secondary CPU(s)
>> [ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32
>> bytes.
>> [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases,
>> linesize 32 bytes
>> [ 0.000000] Zone ranges:
>> [ 0.000000] Normal [mem 0x0000000000000000-0x0000000007ffffff]
>> [ 0.000000] Movable zone start for each node
>> [ 0.000000] Early memory node ranges
>> [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000007ffffff]
>> [ 0.000000] Initmem setup node 0 [mem
>> 0x0000000000000000-0x0000000007ffffff]
>> [ 0.000000] random: get_random_bytes called from
>> start_kernel+0x98/0x4dc with crng_init=0
>> [ 0.000000] percpu: Embedded 14 pages/cpu s26256 r8192 d22896 u57344
>> [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 32480
>> [ 0.000000] Kernel command line: [ 0.000000] Dentry cache hash
>> table entries: 16384 (order: 4, 65536 bytes)
>> [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
>> [ 0.000000] Writing ErrCtl register=00050000
>> [ 0.000000] Readback ErrCtl register=00050000
>> [ 0.000000] Memory: 119048K/131072K available (5210K kernel code,
>> 241K rwdata, 1524K rodata, 3376K init, 232K bss, 12024K reserved, 0K
>> cma-reserved)
>> [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
>> [ 0.000000] rcu: Hierarchical RCU implementation.
>> [ 0.000000] NR_IRQS: 256
>> [ 0.000000] deactivating PMU module 0 (clock gate) failed!
>> [ 0.000000] deactivating PMU module 0 (clock gate) failed!
>> [ 0.000000] deactivating PMU module 0 (clock gate) failed!
>> [ 0.000000] deactivating PMU module 0 (clock gate) failed!
>> [ 0.000000] deactivating PMU module 0 (clock gate) failed!
>> [ 0.000000] deactivating PMU module 0 (clock gate) failed!
>
> Did you add the PUM like this:
>
> pmu0: pmu at 102000 {
> compatible = "lantiq,pmu-xway";
> reg = <0x102000 0x1000>;
> };
>
> Please share your device tree and the other changes you did.
>
>> [ 0.000000] CPU Clock: 333MHz
>> [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles:
>> 0xffffffff, max_idle_ns: 11467562725 ns
>> [ 0.000018] sched_clock: 32 bits at 166MHz, resolution 6ns, wraps
>> every 12884901885ns
>> [ 0.012011] Calibrating delay loop... 221.18 BogoMIPS (lpj=442368)
>> [ 0.061193] pid_max: default: 32768 minimum: 301
>> [ 0.068648] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
>> [ 0.078418] Mountpoint-cache hash table entries: 1024 (order: 0, 4096
>> bytes)
>> [ 0.094717] rcu: Hierarchical SRCU implementation.
>> [ 0.107625] smp: Bringing up secondary CPUs ...
>> [ 0.116227] Primary instruction cache 32kB, VIPT, 4-way, linesize 32
>> bytes.
>> [ 0.116249] Primary data cache 32kB, 4-way, VIPT, cache aliases,
>> linesize 32 bytes
>> [ 0.116461] CPU1 revision is: 00019556 (MIPS 34Kc)
>> [ 0.154663] Synchronize counters for CPU 1: done.
>> [ 0.191216] smp: Brought up 1 node, 2 CPUs
>> [ 0.202371] clocksource: jiffies: mask: 0xffffffff max_cycles:
>> 0xffffffff, max_idle_ns: 7645041785100000 ns
>> [ 0.216869] futex hash table entries: 512 (order: 2, 16384 bytes)
>> [ 0.226527] pinctrl core: initialized pinctrl subsystem
>> [ 0.237723] NET: Registered protocol family 16
>> [ 0.265485] dcdc-xrx200 1f106a00.dcdc: Core Voltage : 2040 mV
>> [ 0.284748] pinctrl-xway 1e100b10.pinmux: Init done
>> [ 0.393384] Kernel panic - not syncing: activating PMU module 0
>> (clock gate) failed!
>> [ 0.404809] Rebooting in 1 seconds..
>> [ 2.865738] Reboot failed -- System halted
>>
>> Secondly, I am encountering some issues in
>> int __init lq_gptu_init(void)
>> ... infact vendor firmware is not using
>> as I get a data abort at line 798 which reads:
>> timer_dev.number_of_timers = GPTU_ID_CFG * 2;
>>
>> and looking at the vendor firmware, they do something like
>> timer_dev.number_of_timers = 3 * 2;
>>
>> Where may I check for wrong things?
>> Thanks!!
>>
>> Enrico
>>
>> From 23bc8dd1d48bf7588f3aca1bf90c3999c0d05bcd Mon Sep 17 00:00:00 2001
>> From: Enrico Mioso <mrkiko.rs at gmail.com>
>> Date: Mon, 2 Sep 2019 05:04:19 +0200
>> Subject: [PATCH] lantiq: XWAY: report PMU module for which
>> activation/deactivation failed
>>
>> Helps in diagnosing issues when porting new devices.
>>
>> Signed-off-by: Enrico Mioso <mrkiko.rs at gmail.com>
>> ---
>> arch/mips/lantiq/xway/sysctrl.c | 8 ++++----
>> 1 file changed, 4 insertions(+), 4 deletions(-)
>>
>> diff --git a/arch/mips/lantiq/xway/sysctrl.c
>> b/arch/mips/lantiq/xway/sysctrl.c
>> index c7f6dee..b30fdcc 100644
>> --- a/arch/mips/lantiq/xway/sysctrl.c
>> +++ b/arch/mips/lantiq/xway/sysctrl.c
>> @@ -165,7 +165,7 @@ void ltq_pmu_enable(unsigned int module)
>> spin_unlock(&g_pmu_lock);
>>
>> if (!retry)
>> - panic("activating PMU module failed!");
>> + panic("activating PMU module %u failed!",module);
>> }
>> EXPORT_SYMBOL(ltq_pmu_enable);
>>
>> @@ -180,7 +180,7 @@ void ltq_pmu_disable(unsigned int module)
>> spin_unlock(&g_pmu_lock);
>>
>> if (!retry)
>> - pr_warn("deactivating PMU module failed!");
>> + pr_warn("deactivating PMU module %u failed!",module);
>> }
>> EXPORT_SYMBOL(ltq_pmu_disable);
>>
>> @@ -218,7 +218,7 @@ static int pmu_enable(struct clk *clk)
>> }
>>
>> if (!retry)
>> - panic("activating PMU module failed!");
>> + panic("activating PMU module %u (clock gate)
>> failed!",clk->module);
>>
>> return 0;
>> }
>> @@ -243,7 +243,7 @@ static void pmu_disable(struct clk *clk)
>> }
>>
>> if (!retry)
>> - pr_warn("deactivating PMU module failed!");
>> + pr_warn("deactivating PMU module %u (clock gate)
>> failed!",clk->module);
>> }
>>
>> static void usb_set_clock(void)
>
>
>
-------------- next part --------------
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list