[OpenWrt-Devel] [PATCH 1/2] mvebu: add kernel 4.19 support
Tomasz Maciej Nowak
tomek_n at o2.pl
Wed Jun 5 10:48:41 EDT 2019
W dniu 05.06.2019 o 16:31, Tomasz Maciej Nowak pisze:
> From: Marko Ratkaj <marko.ratkaj at sartura.hr>
>
> Cc: Vladimir Vid <vladimir.vid at sartura.hr>
> Signed-off-by: Marko Ratkaj <marko.ratkaj at sartura.hr>
> [added sfp related patches from Russell King]
> Signed-off-by: Marek Behún <marek.behun at nic.cz>
> [rebase; rework patches; separate and cleanup kernel configs;
> add espessobin dts; adjust venom dts]
> Signed-off-by: Tomasz Maciej Nowak <tomek_n at o2.pl>
> ---
> target/linux/mvebu/Makefile | 1 +
> target/linux/mvebu/config-4.19 | 501 ++++++++++++
> .../cortexa53/{config-default => config-4.14} | 0
> target/linux/mvebu/cortexa53/config-4.19 | 114 +++
> .../cortexa72/{config-default => config-4.14} | 0
> target/linux/mvebu/cortexa72/config-4.19 | 122 +++
> .../arm/boot/dts/armada-385-linksys-venom.dts | 213 +++++
> .../marvell/armada-3720-espressobin-emmc.dts | 28 +
> .../armada-3720-espressobin-v7-emmc.dts | 43 +
> .../marvell/armada-3720-espressobin-v7.dts | 31 +
> .../patches-4.19/002-add_powertables.patch | 770 ++++++++++++++++++
> .../patches-4.19/003-add_switch_nodes.patch | 40 +
> .../004-add_sata_disk_activity_trigger.patch | 39 +
> ...5-linksys_hardcode_nand_ecc_settings.patch | 17 +
> ...Mangle-bootloader-s-kernel-arguments.patch | 201 +++++
> .../patches-4.19/100-find_active_root.patch | 60 ++
> .../patches-4.19/102-revert_i2c_delay.patch | 15 +
> .../205-armada-385-rd-mtd-partitions.patch | 19 +
> .../206-ARM-mvebu-385-ap-Add-partitions.patch | 35 +
> .../210-clearfog_switch_node.patch | 21 +
> .../220-disable-untested-dsa-boards.patch | 30 +
> ...-armada-xp-linksys-mamba-broken-idle.patch | 10 +
> .../300-mvneta-tx-queue-workaround.patch | 35 +
> ...dicate-failure-to-enter-deeper-sleep.patch | 40 +
> ...-pci-mvebu-time-out-reset-on-link-up.patch | 60 ++
> ...-call-mac_config-during-resolve-when.patch | 44 +
> ...ink-ensure-inband-AN-works-correctly.patch | 59 ++
> ...etdev-sfp_bus-and-use-for-start-stop.patch | 39 +
> ...5-net-phy-marvell10g-add-SFP-support.patch | 155 ++++
> .../406-sfp-add-sfp-compatible.patch | 24 +
> ...7-sfp-display-SFP-module-information.patch | 297 +++++++
> .../408-sfp-more-cotsworks-fixes.patch | 44 +
> ...da388-clearfog-emmc-on-clearfog-base.patch | 87 ++
> ...rmada388-clearfog-document-MPP-usage.patch | 124 +++
> .../patches-4.19/450-reprobe_sfp_phy.patch | 94 +++
> ...l-armada37xx-Add-emmc-sdio-pinctrl-d.patch | 40 +
> ...l-armada-37xx-Enable-emmc-on-espress.patch | 49 ++
> ...ts-marvell-armada37xx-Add-eth0-alias.patch | 20 +
> ...da-3720-espressobin-correct-spi-node.patch | 58 ++
> ...l-armada-3720-espressobin-add-ports-.patch | 26 +
> ...rdvark-Convert-to-use-pci_host_probe.patch | 44 +
> ...-device-to-the-same-MAX-payload-size.patch | 138 ++++
> ...ardvark-disable-LOS-state-by-default.patch | 55 ++
> ...ark-allow-to-specify-link-capability.patch | 43 +
> ...-3720-espressobin-set-max-link-to-ge.patch | 73 ++
> 45 files changed, 3958 insertions(+)
> create mode 100644 target/linux/mvebu/config-4.19
> rename target/linux/mvebu/cortexa53/{config-default => config-4.14} (100%)
> create mode 100644 target/linux/mvebu/cortexa53/config-4.19
> rename target/linux/mvebu/cortexa72/{config-default => config-4.14} (100%)
> create mode 100644 target/linux/mvebu/cortexa72/config-4.19
> create mode 100644 target/linux/mvebu/files-4.19/arch/arm/boot/dts/armada-385-linksys-venom.dts
> create mode 100644 target/linux/mvebu/files-4.19/arch/arm64/boot/dts/marvell/armada-3720-espressobin-emmc.dts
> create mode 100644 target/linux/mvebu/files-4.19/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts
> create mode 100644 target/linux/mvebu/files-4.19/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts
> create mode 100644 target/linux/mvebu/patches-4.19/002-add_powertables.patch
> create mode 100644 target/linux/mvebu/patches-4.19/003-add_switch_nodes.patch
> create mode 100644 target/linux/mvebu/patches-4.19/004-add_sata_disk_activity_trigger.patch
> create mode 100644 target/linux/mvebu/patches-4.19/005-linksys_hardcode_nand_ecc_settings.patch
> create mode 100644 target/linux/mvebu/patches-4.19/006-mvebu-Mangle-bootloader-s-kernel-arguments.patch
> create mode 100644 target/linux/mvebu/patches-4.19/100-find_active_root.patch
> create mode 100644 target/linux/mvebu/patches-4.19/102-revert_i2c_delay.patch
> create mode 100644 target/linux/mvebu/patches-4.19/205-armada-385-rd-mtd-partitions.patch
> create mode 100644 target/linux/mvebu/patches-4.19/206-ARM-mvebu-385-ap-Add-partitions.patch
> create mode 100644 target/linux/mvebu/patches-4.19/210-clearfog_switch_node.patch
> create mode 100644 target/linux/mvebu/patches-4.19/220-disable-untested-dsa-boards.patch
> create mode 100644 target/linux/mvebu/patches-4.19/230-armada-xp-linksys-mamba-broken-idle.patch
> create mode 100644 target/linux/mvebu/patches-4.19/300-mvneta-tx-queue-workaround.patch
> create mode 100644 target/linux/mvebu/patches-4.19/400-cpuidle-mvebu-indicate-failure-to-enter-deeper-sleep.patch
> create mode 100644 target/linux/mvebu/patches-4.19/401-pci-mvebu-time-out-reset-on-link-up.patch
> create mode 100644 target/linux/mvebu/patches-4.19/402-net-phylink-only-call-mac_config-during-resolve-when.patch
> create mode 100644 target/linux/mvebu/patches-4.19/403-net-phylink-ensure-inband-AN-works-correctly.patch
> create mode 100644 target/linux/mvebu/patches-4.19/404-sfp-provide-netdev-sfp_bus-and-use-for-start-stop.patch
> create mode 100644 target/linux/mvebu/patches-4.19/405-net-phy-marvell10g-add-SFP-support.patch
> create mode 100644 target/linux/mvebu/patches-4.19/406-sfp-add-sfp-compatible.patch
> create mode 100644 target/linux/mvebu/patches-4.19/407-sfp-display-SFP-module-information.patch
> create mode 100644 target/linux/mvebu/patches-4.19/408-sfp-more-cotsworks-fixes.patch
> create mode 100644 target/linux/mvebu/patches-4.19/412-ARM-dts-armada388-clearfog-emmc-on-clearfog-base.patch
> create mode 100644 target/linux/mvebu/patches-4.19/415-ARM-dts-armada388-clearfog-document-MPP-usage.patch
> create mode 100644 target/linux/mvebu/patches-4.19/450-reprobe_sfp_phy.patch
> create mode 100644 target/linux/mvebu/patches-4.19/513-arm64-dts-marvell-armada37xx-Add-emmc-sdio-pinctrl-d.patch
> create mode 100644 target/linux/mvebu/patches-4.19/514-arm64-dts-marvell-armada-37xx-Enable-emmc-on-espress.patch
> create mode 100644 target/linux/mvebu/patches-4.19/520-arm64-dts-marvell-armada37xx-Add-eth0-alias.patch
> create mode 100644 target/linux/mvebu/patches-4.19/521-arm64-dts-armada-3720-espressobin-correct-spi-node.patch
> create mode 100644 target/linux/mvebu/patches-4.19/522-arm64-dts-marvell-armada-3720-espressobin-add-ports-.patch
> create mode 100644 target/linux/mvebu/patches-4.19/523-Revert-PCI-aardvark-Convert-to-use-pci_host_probe.patch
> create mode 100644 target/linux/mvebu/patches-4.19/524-PCI-aardvark-set-host-and-device-to-the-same-MAX-payload-size.patch
> create mode 100644 target/linux/mvebu/patches-4.19/526-PCI-aardvark-disable-LOS-state-by-default.patch
> create mode 100644 target/linux/mvebu/patches-4.19/527-PCI-aardvark-allow-to-specify-link-capability.patch
> create mode 100644 target/linux/mvebu/patches-4.19/528-arm64-dts-armada-3720-espressobin-set-max-link-to-ge.patch
Sorry, this was meant to be sent as v2 of https://patchwork.ozlabs.org/patch/1100700
should mention that, since Marek is occupied now, I'm sending it on his behalf.
--
TMN
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list