[OpenWrt-Devel] dnscrypt-proxy package missing in snapshot

[Mangesh Bhamre]

Hi Alex,

Looking at build log -
http://buildbot.openwrt.org:8010/broken_packages/ramips.mt7620/dnscrypt-proxy/compile.txt

Tar ball is available on download.dnscrypt.org . Build download fails for
some SSL issue.

Also, tar ball is missing on mirror2.openwrt.org and
downloads.openwrt.org/sources

Not sure, how mirror2 or download.openwrt.org gets updated.  Any help in
getting is appreciated.

Regards,
Mangesh


On Sat, Feb 11, 2017 at 6:20 PM, Alexandru Ardelean <ardeleanalex at gmail.com>
wrote:

> If I got this correctly it's broken for that target as well
>
> http://buildbot.openwrt.org:8010/broken_packages/ramips.mt7620/
>
> It looks like an issue with the source tar ball not being present in any
> OpenWrt mirror.
>
> Well, that was the error when it tried to build.
> Looks like dnscrypt-proxy was updated on the 7th of Feb 2017.
>
> No idea how the artifact caching works on OpenWrt buildbot.
>
> But, it could be that the issue may resolve itself, after triggering a
> rebuild.
> It doesn't look like it failed on all targets.
>
>
> On Sat, 11 Feb 2017 at 14:14, Mangesh Bhamre <mangesh at opennetware.com>
> wrote:
>
>> Hi Alex,
>>
>> ramips architecture. Mt7620 make file.
>>
>> Regards
>> Mangesh
>>
>> On 11-Feb-2017 4:56 PM, "Alexandru Ardelean" <ardeleanalex at gmail.com>
>> wrote:
>>
>> Hey Mangesh,
>>
>> So, I don't use much ImageBuilder.
>> I don't even know how that works.
>>
>> I usually just do
>>
>> < get OpenWrt repo >
>> ./scripts/feeds update packages
>> ./scripts/feeds install -a
>> make menuconfig
>> < select packages I need, configure arch, etc >
>> make V=99 -j8
>> < extract image from the bin directory >
>>
>> Looking through
>> https://github.com/openwrt/packages/tree/master/net/dnscrypt-proxy
>> It looks like dnscrypt-proxy should be there.
>> But that's just the Makefile that builds the package.
>>
>> Does ImageBuilder install pre-built packages from an OpenWrt mirror ?
>> Because on some architectures, dnscrypt-proxy looks broken.
>>
>> Example:
>> http://buildbot.openwrt.org:8010/broken_packages/mpc85xx/
>> http://buildbot.openwrt.org:8010/broken_packages/kirkwood/
>> http://buildbot.openwrt.org:8010/broken_packages/bcm53xx/
>> http://buildbot.openwrt.org:8010/broken_packages/ar71xx.mikrotik/
>> http://buildbot.openwrt.org:8010/broken_packages/adm8668/
>>
>> On which architecture are you trying to build ?
>> I understand you're trying to build on CC 15.05.1
>>
>> So, a bit more info about your setup could help.
>>
>>
>> On Sat, Feb 11, 2017 at 7:35 AM, Mangesh Bhamre <mangesh at opennetware.com>
>> wrote:
>> > Hi Alex and OpenWRT Team,
>> >
>> > Any help on getting  dnscrypt-proxy package into snapshot will be
>> helpful.
>> > It is working fine with 15.05.1 - but not snapshot ImageBuilder.
>> >
>> > Regards,
>> > Mangesh Bhamre
>> >
>> > On Tue, Feb 7, 2017 at 10:32 PM, Mangesh Bhamre <
>> mangesh at opennetware.com>
>> > wrote:
>> >>
>> >> Hi Alex,
>> >>
>> >> Snapshot don't have any reference of 'dnscrypt-proxy'. It is supported
>> in
>> >> CC 15.05.1 and I am able to add 'dnscrypt-proxy' in list of packages to
>> >> include while building with CC Image-builder.
>> >>
>> >> I scanned through all snapshot image-builder and no reference there. I
>> run
>> >> following command to build - same works fine for CC 15.05.1
>> >>
>> >> make image PROFILE=Default PACKAGES="-wpad-mini wpad luci curl
>> >> ca-certificates dnscrypt-proxy" FILES=/home/mangesh/files
>> >>
>> >> Surely no typo there.
>> >>
>> >> Regards,
>> >> Mangesh
>> >>
>> >>
>> >> On Tue, Feb 7, 2017 at 10:23 PM, Alexandru Ardelean
>> >> <ardeleanalex at gmail.com> wrote:
>> >>>
>> >>> Do you have a Package/dnscrypt-proxy/install rule ?
>> >>> Are you calling the BuildPackage rule ?
>> >>>
>> >>> Do you have Package/dnscrypt-proxy/description rule ?
>> >>>
>> >>> And check for typos if above stuff is checked.
>> >>>
>> >>> Thanks
>> >>> Alex
>> >>>
>> >>>
>> >>> On Tue, 7 Feb 2017 at 18:21, Mangesh Bhamre <mangesh at opennetware.com>
>> >>> wrote:
>> >>>>
>> >>>> Hello OpenWRT team,
>> >>>>
>> >>>> I wish to bundle dnscrypt-proxy package using latest snapshot
>> >>>> Image-builder. I get below errors. Please recommend a fix or address
>> it in
>> >>>> snapshot.
>> >>>>
>> >>>> Collected errors:
>> >>>>  * opkg_install_cmd: Cannot install package dnscrypt-proxy.
>> >>>> Makefile:146: recipe for target 'package_install' failed
>> >>>>
>> >>>> Regards,
>> >>>> Mangesh
>> >>>> _______________________________________________
>> >>>> openwrt-devel mailing list
>> >>>> openwrt-devel at lists.openwrt.org
>> >>>> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
>> >>
>> >>
>> >
>>
>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.infradead.org/pipermail/openwrt-devel/attachments/20170213/1cb28b84/attachment.htm>
-------------- next part --------------
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel