[OpenWrt-Devel] [PATCH] Chaos Calmer - ramips: Fix IPv6 neighbor discovery on RT5350

[Vittorio G (VittGam)]

On 02/05/2016 10:06:49 CEST, John Crispin wrote:
> On 02/05/2016 09:55, Vittorio G (VittGam) wrote:
>> Actually there's a problem with this patch: the tabs have been converted
>> to spaces by your mailer, so it does not apply directly...
>>
>> The patch on GitHub is fine by the way.
>>
>> Cheers,
>> Vittorio
>
> you seem to have sent the same patch which does not look whitespace
> broken. i'll use that one instead.

My patch is not for CC... it's for trunk which uses the newer rt305x driver.

Cheers,
Vittorio

>
> 	John
>
>>
>> On 01/05/2016 23:59:27 CEST, Vittorio G (VittGam) wrote:
>>> On 01/05/2016 23:36:05 CEST, Saverio Proto wrote:
>>>> This patch is also available here:
>>>> https://github.com/zioproto/openwrt15051-batman/commit/0281382bcaa139f0d1d3b589797af4c434747f3e
>>>>
>>>>
>>>> commit 0281382bcaa139f0d1d3b589797af4c434747f3e
>>>> Author: Saverio Proto <zioproto at gmail.com>
>>>> Date:   Sun May 1 23:14:19 2016 +0200
>>>>
>>>>     ramips: Fix IPv6 neighbor discovery on RT5350
>>>>
>>>>     IPv6 neighbor discovery needs working IPv6 multicast. The
>>>> register FCT2
>>>>     should be set to 0x2500C to let through "unknown IPv6 multicast" to
>>>>     all ports. This is based on datasheet information:
>>>>     https://cdn.sparkfun.com/datasheets/Wireless/WiFi/RT5350.pdf
>>>>
>>>>     Signed-off-by: Saverio Proto <zioproto at gmail.com>
>>>
>>> Reviewed-by: Vittorio Gambaletta <openwrt at vittgam.net>
>>>
>>>>
>>>> diff --git
>>>> a/target/linux/ramips/files/drivers/net/ethernet/ralink/esw_rt3052.c
>>>> b/target/linux/ramips/files/drivers/net/ethernet/ralink/esw_rt3052.c
>>>> index ef13d23..d09eaf3 100644
>>>> --- a/target/linux/ramips/files/drivers/net/ethernet/ralink/esw_rt3052.c
>>>> +++ b/target/linux/ramips/files/drivers/net/ethernet/ralink/esw_rt3052.c
>>>> @@ -1360,7 +1360,7 @@ static const struct switch_dev_ops esw_ops = {
>>>>  static struct rt305x_esw_platform_data rt3050_esw_data = {
>>>>         /* All ports are LAN ports. */
>>>>         .vlan_config            = RT305X_ESW_VLAN_CONFIG_NONE,
>>>> -       .reg_initval_fct2       = 0x00d6500c,
>>>> +       .reg_initval_fct2       = 0x0002500c,
>>>>         /*
>>>>          * ext phy base addr 31, enable port 5 polling, rx/tx clock
>>>> skew 1,
>>>>          * turbo mii off, rgmi 3.3v off
>>>> _______________________________________________
>>>> openwrt-devel mailing list
>>>> openwrt-devel at lists.openwrt.org
>>>> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
>>> _______________________________________________
>>> openwrt-devel mailing list
>>> openwrt-devel at lists.openwrt.org
>>> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
>> _______________________________________________
>> openwrt-devel mailing list
>> openwrt-devel at lists.openwrt.org
>> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel at lists.openwrt.org
> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel