[OpenWrt-Devel] [PATCH] Chaos Calmer - ramips: Fix IPv6 neighbor discovery on RT5350

[John Crispin]

On 02/05/2016 09:55, Vittorio G (VittGam) wrote:
> Actually there's a problem with this patch: the tabs have been converted
> to spaces by your mailer, so it does not apply directly...
> 
> The patch on GitHub is fine by the way.
> 
> Cheers,
> Vittorio

you seem to have sent the same patch which does not look whitespace
broken. i'll use that one instead.

	John

> 
> On 01/05/2016 23:59:27 CEST, Vittorio G (VittGam) wrote:
>> On 01/05/2016 23:36:05 CEST, Saverio Proto wrote:
>>> This patch is also available here:
>>> https://github.com/zioproto/openwrt15051-batman/commit/0281382bcaa139f0d1d3b589797af4c434747f3e
>>>
>>>
>>> commit 0281382bcaa139f0d1d3b589797af4c434747f3e
>>> Author: Saverio Proto <zioproto at gmail.com>
>>> Date:   Sun May 1 23:14:19 2016 +0200
>>>
>>>     ramips: Fix IPv6 neighbor discovery on RT5350
>>>
>>>     IPv6 neighbor discovery needs working IPv6 multicast. The
>>> register FCT2
>>>     should be set to 0x2500C to let through "unknown IPv6 multicast" to
>>>     all ports. This is based on datasheet information:
>>>     https://cdn.sparkfun.com/datasheets/Wireless/WiFi/RT5350.pdf
>>>
>>>     Signed-off-by: Saverio Proto <zioproto at gmail.com>
>>
>> Reviewed-by: Vittorio Gambaletta <openwrt at vittgam.net>
>>
>>>
>>> diff --git
>>> a/target/linux/ramips/files/drivers/net/ethernet/ralink/esw_rt3052.c
>>> b/target/linux/ramips/files/drivers/net/ethernet/ralink/esw_rt3052.c
>>> index ef13d23..d09eaf3 100644
>>> --- a/target/linux/ramips/files/drivers/net/ethernet/ralink/esw_rt3052.c
>>> +++ b/target/linux/ramips/files/drivers/net/ethernet/ralink/esw_rt3052.c
>>> @@ -1360,7 +1360,7 @@ static const struct switch_dev_ops esw_ops = {
>>>  static struct rt305x_esw_platform_data rt3050_esw_data = {
>>>         /* All ports are LAN ports. */
>>>         .vlan_config            = RT305X_ESW_VLAN_CONFIG_NONE,
>>> -       .reg_initval_fct2       = 0x00d6500c,
>>> +       .reg_initval_fct2       = 0x0002500c,
>>>         /*
>>>          * ext phy base addr 31, enable port 5 polling, rx/tx clock
>>> skew 1,
>>>          * turbo mii off, rgmi 3.3v off
>>> _______________________________________________
>>> openwrt-devel mailing list
>>> openwrt-devel at lists.openwrt.org
>>> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
>> _______________________________________________
>> openwrt-devel mailing list
>> openwrt-devel at lists.openwrt.org
>> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel at lists.openwrt.org
> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel