[OpenWrt-Devel] [RFC] ramips: Add initial support for the Netgear WNDR3700v5
L. D. Pinney
ldpinney at gmail.com
Mon Mar 28 11:58:02 EDT 2016
Sercomm hacked bootloader replaced with my own from : https://github.com/gnubee-git/GnuBee-MT7621-uboot.git
Relevent files and instructions can be downloaded from : https://drive.google.com/open?id=0B0CKglNyN0URM2FhVDBpNkVsRlk
Some Devices are 'uncooperative' Reset and WPS switches, and LEDs other than power.
Radios are still non-functional. (MT7662E and MT7603EN)
Device has the single-core MediaTek MT7621S.
How should CONFIG_NR_CPUS=2 be set in the kernel config ... most other devices will need CPUS=4 ??
Signed-off-by: L. D. Pinney <ldpinney at gmail.com>
---
target/linux/ramips/base-files/etc/board.d/01_leds | 3 ++
target/linux/ramips/base-files/etc/board.d/02_network | 1 +
target/linux/ramips/base-files/etc/diag.sh | 1 +
target/linux/ramips/base-files/lib/ramips.sh | 3 ++
target/linux/ramips/base-files/lib/upgrade/platform.sh | 1 +
target/linux/ramips/dts/WNDR3700V5.dts | 122 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
target/linux/ramips/image/Makefile | 7 +++-
target/linux/ramips/mt7621/config-4.4 | 2 +-
target/linux/ramips/mt7621/profiles/netgear.mk | 17 ++++++++++
9 files changed, 155 insertions(+), 2 deletions(-)
diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds
index 5816e60..a396212 100755
--- a/target/linux/ramips/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/base-files/etc/board.d/01_leds
@@ -264,6 +264,9 @@ whr-600d)
wnce2001)
set_wifi_led "$board:green:wlan"
;;
+wndr3700v5)
+ ucidef_set_led_default "power" "POWER" "$board:green:power" "0"
+ ;;
wt3020)
ucidef_set_led_default "power" "power" "$board:blue:power" "0"
;;
diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index 4b65d36..8c804b2 100755
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -81,6 +81,7 @@ ramips_setup_interfaces()
whr-300hp2|\
whr-600d|\
witi|\
+ wndr3700v5|\
wsr-1166|\
wsr-600|\
wt1520|\
diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
index daa7fb1..2f34aff 100644
--- a/target/linux/ramips/base-files/etc/diag.sh
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -26,6 +26,7 @@ get_status_led() {
nbg-419n|\
pwh2004|\
wnce2001|\
+ wndr3700v5|\
x5|\
x8|\
xdxrn502j)
diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
index 5f1df7b..e67ac8d 100755
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -454,6 +454,9 @@ ramips_board_detect() {
*"WNCE2001")
name="wnce2001"
;;
+ *"WNDR3700v5")
+ name="wndr3700v5"
+ ;;
*"WR512-3GN-like"*)
name="wr512-3gn"
;;
diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index c329dce..db9d7de 100755
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -133,6 +133,7 @@ platform_check_image() {
wli-tx4-ag300n|\
wmr-300|\
wnce2001|\
+ wndr3700v5|\
wr512-3gn|\
wr6202|\
wrtnode|\
diff --git a/target/linux/ramips/dts/WNDR3700V5.dts b/target/linux/ramips/dts/WNDR3700V5.dts
new file mode 100644
index 0000000..508ba86
--- /dev/null
+++ b/target/linux/ramips/dts/WNDR3700V5.dts
@@ -0,0 +1,122 @@
+/dts-v1/;
+
+#include "mt7621.dtsi"
+
+/ {
+ compatible = "mediatek,mt7621-eval-board","ralink,mt7621-soc";
+ model = "Netgear WNDR3700v5";
+
+ memory at 0 {
+ device_type = "memory";
+ reg = <0x0 0x8000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,57600";
+ };
+
+ palmbus at 1E000000 {
+ spi at b00 {
+ status = "okay";
+
+ m25p80 at 0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "mx25l12805d";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "w25q128";
+ spi-max-frequency = <10000000>;
+
+ partition at 0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ };
+
+ partition at 30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition at f30000 {
+ label = "factory";
+ reg = <0xf30000 0x10000>;
+ read-only;
+ };
+
+ partition at 50000 {
+ label = "firmware";
+ reg = <0x50000 0xfb0000>;
+ };
+ };
+ };
+ };
+
+ pcie at 1e140000 {
+ status = "okay";
+
+ pcie0 {
+ mt76 at 0,0 {
+ reg = <0x0000 0 0 0 0>;
+ device_type = "pci";
+ mediatek,mtd-eeprom = <&factory 0x0004>;
+ mediatek,5ghz = <0>;
+ };
+ };
+
+ pcie2 {
+ mt76 at 2,0 {
+ reg = <0x1000 0 0 0 0>;
+ device_type = "pci";
+ mediatek,mtd-eeprom = <&factory 0x8004>;
+ mediatek,2ghz = <0>;
+ };
+ };
+ };
+
+ ethernet at 1e100000 {
+ mtd-mac-address = <&factory 0x0000000c>;
+ };
+
+ pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "rgmii2", "mdio", "wdt";
+ ralink,function = "gpio";
+ };
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ power {
+ label = "wndr3700v5:green:power";
+ gpios = <&gpio0 18 0>;
+ };
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <20>;
+
+ rfkill {
+ label = "rfkill";
+ gpios = <&gpio0 8 0>;
+ linux,code = <0xf7>;
+ };
+ };
+
+ gpio_export {
+ compatible = "gpio-export";
+ #size-cells = <0>;
+
+ usbpower {
+ gpio-export,name = "usbpower";
+ gpio-export,output = <1>;
+ gpios = <&gpio0 10 1>;
+ };
+ };
+};
diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile
index 0cfb8fb..a25f025 100644
--- a/target/linux/ramips/image/Makefile
+++ b/target/linux/ramips/image/Makefile
@@ -1058,7 +1058,7 @@ endif
#
ifeq ($(SUBTARGET),mt7621)
- TARGET_DEVICES += mt7621 wsr-600 wsr-1166 dir-860l-b1 firewrt pbr-m1 re6500 sap-g3200u3 ubnt-erx witi wf-2881 zbt-wg2626
+ TARGET_DEVICES += mt7621 wsr-600 wsr-1166 dir-860l-b1 firewrt pbr-m1 re6500 sap-g3200u3 ubnt-erx witi wf-2881 wndr3700v5 zbt-wg2626
endif
define Device/mt7621
@@ -1115,6 +1115,11 @@ define Device/witi
IMAGE_SIZE := $(ralink_default_fw_size_16M)
endef
+define Device/wndr3700v5
+ DTS := WNDR3700V5
+ IMAGE_SIZE := $(ralink_default_fw_size_16M)
+endef
+
define Device/zbt-wg2626
DTS := ZBT-WG2626
IMAGE_SIZE := $(ralink_default_fw_size_16M)
diff --git a/target/linux/ramips/mt7621/config-4.4 b/target/linux/ramips/mt7621/config-4.4
index 862c8e9..6d93c1d 100644
--- a/target/linux/ramips/mt7621/config-4.4
+++ b/target/linux/ramips/mt7621/config-4.4
@@ -179,7 +179,7 @@ CONFIG_NET_MEDIATEK_SOC=y
CONFIG_NET_VENDOR_MEDIATEK=y
CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
# CONFIG_NO_IOPORT_MAP is not set
-CONFIG_NR_CPUS=4
+CONFIG_NR_CPUS=2
CONFIG_OF=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_ADDRESS_PCI=y
diff --git a/target/linux/ramips/mt7621/profiles/netgear.mk b/target/linux/ramips/mt7621/profiles/netgear.mk
new file mode 100644
index 0000000..05802a2
--- /dev/null
+++ b/target/linux/ramips/mt7621/profiles/netgear.mk
@@ -0,0 +1,17 @@
+#
+# Copyright (C) 2015 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/WNDR3700V5
+ NAME:=Netgear WNDR3700v5
+ PACKAGES:=\
+ kmod-usb-core kmod-usb3
+endef
+
+define Profile/WNDR3700V5/Description
+ Package set compatible with the Netgear WNDR3700v5.
+endef
+$(eval $(call Profile,WNDR3700V5))
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list