[OpenWrt-Devel] [PATCH 8/8] mpc85xx: add NM50 config for fw_(printenv/setenv)

[Michael Heimpold]

Hi,

Am Wednesday 23 March 2016, 13:17:32 schrieb Dieter Pfeuffer:
> Signed-off-by: Dieter Pfeuffer <dieter.pfeuffer at men.de>
> ---
>  target/linux/mpc85xx/base-files/etc/fw_env.config | 22
> ++++++++++++++++++++++ 1 file changed, 22 insertions(+)
>  create mode 100644 target/linux/mpc85xx/base-files/etc/fw_env.config
> 
> diff --git a/target/linux/mpc85xx/base-files/etc/fw_env.config
> b/target/linux/mpc85xx/base-files/etc/fw_env.config new file mode 100644
> index 0000000..1780f22
> --- /dev/null
> +++ b/target/linux/mpc85xx/base-files/etc/fw_env.config
> @@ -0,0 +1,22 @@
> +# Configuration file for fw_(printenv/setenv) utility.
> +# Up to two entries are valid, in this case the redundant
> +# environment sector is assumed present.
> +# Notice, that the "Number of sectors" is not required on NOR and
> SPI-dataflash. +# Futhermore, if the Flash sector size is ommitted, this
> value is assumed to +# be the same as the Environment size, which is valid
> for NOR and SPI-dataflash +
> +# NOR example
> +# MTD device name	Device offset	Env. size	Flash sector size	Number of
> sectors 
> +/dev/mtd1		0x0000		0x2000		0x2000

I think it would be better to make use of ubootenv_add_uci_config and
the other infrastructure and create a new file in
package/boot/uboot-envtools/files

Regards,
mhei

> +#/dev/mtd2		0x0000		0x4000		0x4000
> +
> +# MTD SPI-dataflash example
> +# MTD device name	Device offset	Env. size	Flash sector size	Number of
> sectors +#/dev/mtd5		0x4200		0x4200
> +#/dev/mtd6		0x4200		0x4200
> +
> +# NAND example
> +#/dev/mtd0		0x4000		0x4000		0x20000			2
> +
> +# Block device example
> +#/dev/mmcblk0		0xc0000		0x20000
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel