[OpenWrt-Devel] [PATCH 8/8] mpc85xx: add NM50 config for fw_(printenv/setenv)

[Dieter Pfeuffer]

Signed-off-by: Dieter Pfeuffer <dieter.pfeuffer at men.de>
---
 target/linux/mpc85xx/base-files/etc/fw_env.config | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)
 create mode 100644 target/linux/mpc85xx/base-files/etc/fw_env.config

diff --git a/target/linux/mpc85xx/base-files/etc/fw_env.config b/target/linux/mpc85xx/base-files/etc/fw_env.config
new file mode 100644
index 0000000..1780f22
--- /dev/null
+++ b/target/linux/mpc85xx/base-files/etc/fw_env.config
@@ -0,0 +1,22 @@
+# Configuration file for fw_(printenv/setenv) utility.
+# Up to two entries are valid, in this case the redundant
+# environment sector is assumed present.
+# Notice, that the "Number of sectors" is not required on NOR and SPI-dataflash.
+# Futhermore, if the Flash sector size is ommitted, this value is assumed to
+# be the same as the Environment size, which is valid for NOR and SPI-dataflash
+
+# NOR example
+# MTD device name	Device offset	Env. size	Flash sector size	Number of sectors
+/dev/mtd1		0x0000		0x2000		0x2000
+#/dev/mtd2		0x0000		0x4000		0x4000
+
+# MTD SPI-dataflash example
+# MTD device name	Device offset	Env. size	Flash sector size	Number of sectors
+#/dev/mtd5		0x4200		0x4200
+#/dev/mtd6		0x4200		0x4200
+
+# NAND example
+#/dev/mtd0		0x4000		0x4000		0x20000			2
+
+# Block device example
+#/dev/mmcblk0		0xc0000		0x20000
-- 
1.9.1
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel