[OpenWrt-Devel] Which image for the Nanostation Loco M2, WAS:Cannot flash UBNT Loco M2

[Aaron Z]

 )On Fri, Mar 11, 2016 at 9:28 AM, Matthias Schiffer
<mschiffer at universe-factory.net> wrote:
> PS. Completely unrelated to this issue: I noticed in your log that you used
> the wrong image ("nanostation" instead of "bullet") for your Loco. This
> isn't really an issue, as the nanostation and bullet images only differ by
> the number of ethernet ports they define, but you'll have a dead "eth1"
> device. The image "nanostation" should used for the NanoStation (as it is
> the only device with two ethernet ports), and "bullet" for everything from
> the AirMax XM series except NanoStation and Rocket (Bullet, Loco,
> PicoStation, ...)
So, which should be used for the Nanostation Loco M2 (
http://www.amazon.com/Ubiquiti-NanoStation-locoM2-2-4GHz-Outdoor/dp/B004EGI3CI/
) which has one Ethernet port?
The one I have is an older (non-XW) device. For CC, I see:
openwrt-15.05-ar71xx-generic-ubnt-bullet-m-squashfs-sysupgrade.bin and
openwrt-15.05-ar71xx-generic-ubnt-nano-m-squashfs-sysupgrade.bin
I had used the nano build, but it has a non-functional eth1 port.

Aaron Z
A human being should be able to change a diaper, plan an invasion,
butcher a hog, conn a ship, design a building, write a sonnet, balance
accounts, build a wall, set a bone, comfort the dying, take orders,
give orders, cooperate, act alone, solve equations, analyze a new
problem, pitch manure, program a computer, cook a tasty meal, fight
efficiently, die gallantly. Specialization is for insects.
— Robert Heinlein, Time Enough for Love
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel