[OpenWrt-Devel] [PATCH] Add support for Netgear D7800

Tathagata Das tathagata at alumnux.com
Tue Jan 19 03:58:15 EST 2016


Done -- just prepared and sent it again.

Regards,
Tathagata


-----Original Message-----
From: John Crispin [mailto:blogic at openwrt.org] 
Sent: 19 January 2016 14:13
To: Tathagata Das; openwrt-devel at lists.openwrt.org
Subject: Re: [OpenWrt-Devel] [PATCH] Add support for Netgear D7800

please do that.

On 19/01/2016 09:38, Tathagata Das wrote:
> Do you mean to say that I have to prepare the patch against latest 
> code of trunk and send that it again?
> 
> Regards,
> Tathagata
> 
> 
> -----Original Message-----
> From: John Crispin [mailto:blogic at openwrt.org]
> Sent: 19 January 2016 14:07
> To: Tathagata Das; openwrt-devel at lists.openwrt.org
> Subject: Re: [OpenWrt-Devel] [PATCH] Add support for Netgear D7800
> 
> you patch collides with f177c2c2f956c938045bd53943e3f1c090b5db2b so 
> you will have to rebase/send it.
> 
> 
> 
> On 19/01/2016 09:26, Tathagata Das wrote:
>> Hi John,
>>
>> I sent the patch last time using git command and I even received an 
>> email from OpenWRT on 12th January 2016.
>>
>> Regards,
>> Tathagata
>>
>>
>> -----Original Message-----
>> From: John Crispin [mailto:blogic at openwrt.org]
>> Sent: 19 January 2016 13:45
>> To: Tathagata Das; openwrt-devel at lists.openwrt.org
>> Subject: Re: [OpenWrt-Devel] [PATCH] Add support for Netgear D7800
>>
>> same as before, we are waiting on you to send a version that applies.
>>
>>
>> patchwork 566597
>> --2016-01-17 06:23:22--
>> http://patchwork.ozlabs.org/patch/566597/mbox/
>> Resolving patchwork.ozlabs.org (patchwork.ozlabs.org)... 
>> 103.22.144.67 Connecting to patchwork.ozlabs.org 
>> (patchwork.ozlabs.org)|103.22.144.67|:80... connected.
>> HTTP request sent, awaiting response... 200 OK
>> Length: unspecified [text/plain]
>> Saving to: `566597.patch'
>>
>>     [ <=>
>>                    ] 12,864      --.-K/s   in 0s
>>
>> 2016-01-17 06:23:24 (115 MB/s) - `566597.patch' saved [12864]
>>
>> Applying: Add support for Netgear D7800 Using index info to 
>> reconstruct a base tree...
>> <stdin>:109: space before tab in indent.
>>  	qcom-ipq8064-ap148.dtb \
>> <stdin>:110: space before tab in indent.
>>  	qcom-ipq8064-db149.dtb \
>> <stdin>:111: space before tab in indent.
>>  	qcom-ipq8064-r7500.dtb \
>> <stdin>:113: space before tab in indent.
>>  	qcom-msm8660-surf.dtb \
>> <stdin>:114: space before tab in indent.
>>  	qcom-msm8960-cdp.dtb \
>> warning: squelched 1 whitespace error
>> warning: 6 lines add whitespace errors.
>> Falling back to patching base and 3-way merge...
>> Auto-merging target/linux/ipq806x/image/Makefile
>> Auto-merging target/linux/ipq806x/base-files/lib/upgrade/platform.sh
>> CONFLICT (content): Merge conflict in 
>> target/linux/ipq806x/base-files/lib/upgrade/platform.sh
>> Failed to merge in the changes.
>> Patch failed at 0001 Add support for Netgear D7800 When you have 
>> resolved this problem run "git am --resolved".
>> If you would prefer to skip this patch, instead run "git am --skip".
>> To restore the original branch and stop patching run "git am --abort".
>> Unstaged changes after reset:
>> M	target/linux/ipq806x/base-files/etc/board.d/01_leds
>> M	target/linux/ipq806x/base-files/etc/board.d/02_network
>> M	target/linux/ipq806x/base-files/lib/ipq806x.sh
>> M	target/linux/ipq806x/base-files/lib/upgrade/platform.sh
>> M	target/linux/ipq806x/image/Makefile
>> M	target/linux/ipq806x/profiles/netgear.mk
>> applying 566597 FAILED
>>
>>
>> patchwork 569813
>> --2016-01-17 06:22:13--
>> http://patchwork.ozlabs.org/patch/569813/mbox/
>> Resolving patchwork.ozlabs.org (patchwork.ozlabs.org)... 
>> 103.22.144.67 Connecting to patchwork.ozlabs.org 
>> (patchwork.ozlabs.org)|103.22.144.67|:80... connected.
>> HTTP request sent, awaiting response... 200 OK
>> Length: unspecified [text/plain]
>> Saving to: `569813.patch'
>>
>>     [ <=>
>>                    ] 13,088      --.-K/s   in 0s
>>
>> 2016-01-17 06:22:14 (172 MB/s) - `569813.patch' saved [13088]
>>
>> Applying: Add support for Netgear D7800
>> fatal: patch fragment without header at line 130: @@ -0,0 +1,381 @@ 
>> Repository lacks necessary blobs to fall back on 3-way merge.
>> Cannot fall back to three-way merge.
>> Patch failed at 0001 Add support for Netgear D7800 When you have 
>> resolved this problem run "git am --resolved".
>> If you would prefer to skip this patch, instead run "git am --skip".
>> To restore the original branch and stop patching run "git am --abort".
>> applying 569813 FAILED
>>
>>
>>
>>
>> On 19/01/2016 07:19, Tathagata Das wrote:
>>> Any update about the patch?
>>>
>>> Regards,
>>> Tathagata
>>>
>>>
>>> -----Original Message-----
>>> From: Tathagata Das [mailto:tathagata at alumnux.com]
>>> Sent: 12 January 2016 20:47
>>> To: openwrt-devel at lists.openwrt.org
>>> Cc: Tathagata Das
>>> Subject: [PATCH] Add support for Netgear D7800
>>>
>>> Signed-off-by: Tathagata Das <tathagata at alumnux.com>
>>> ---
>>>  .../linux/ipq806x/base-files/etc/board.d/01_leds   |   1 +
>>>  .../ipq806x/base-files/etc/board.d/02_network      |   1 +
>>>  target/linux/ipq806x/base-files/lib/ipq806x.sh     |   3 +
>>>  .../ipq806x/base-files/lib/upgrade/platform.sh     |   2 +
>>>  target/linux/ipq806x/image/Makefile                |  13 +-
>>>  ...dd-Netgear-Nighthawk-X4-D7800-device-tree.patch | 381
>>> +++++++++++++++++++++
>>>  target/linux/ipq806x/profiles/netgear.mk           |  13 +
>>>  7 files changed, 413 insertions(+), 1 deletion(-)  create mode
>>> 100644
>>> target/linux/ipq806x/patches-3.18/801-ARM-qcom-add-Netgear-Nighthawk
>>> -
>>> X
>>> 4-D780
>>> 0-device-tree.patch
>>>
>>> diff --git a/target/linux/ipq806x/base-files/etc/board.d/01_leds
>>> b/target/linux/ipq806x/base-files/etc/board.d/01_leds
>>> index 07b5b06..b32c1cc 100755
>>> --- a/target/linux/ipq806x/base-files/etc/board.d/01_leds
>>> +++ b/target/linux/ipq806x/base-files/etc/board.d/01_leds
>>> @@ -11,6 +11,7 @@ board_config_update
>>>  board=$(ipq806x_board_name)
>>>  
>>>  case "$board" in
>>> +d7800 |\
>>>  r7500)
>>>  	ucidef_set_led_usbdev "usb1" "USB 1" "r7500:white:usb1" "1-1"
>>>  	ucidef_set_led_usbdev "usb2" "USB 2" "r7500:white:usb3" "3-1"
>>> diff --git a/target/linux/ipq806x/base-files/etc/board.d/02_network
>>> b/target/linux/ipq806x/base-files/etc/board.d/02_network
>>> index 1302a55..6e18297 100755
>>> --- a/target/linux/ipq806x/base-files/etc/board.d/02_network
>>> +++ b/target/linux/ipq806x/base-files/etc/board.d/02_network
>>> @@ -13,6 +13,7 @@ board=$(ipq806x_board_name)
>>>  
>>>  case "$board" in
>>>  ap148 |\
>>> +d7800 |\
>>>  r7500)
>>>  	ucidef_add_switch "switch0" \
>>>  		"1:lan" "2:lan" "3:lan" "4:lan" "6 at eth1" "5:wan" "0 at eth0"
>>> diff --git a/target/linux/ipq806x/base-files/lib/ipq806x.sh
>>> b/target/linux/ipq806x/base-files/lib/ipq806x.sh
>>> index 5b27bde..db22708 100644
>>> --- a/target/linux/ipq806x/base-files/lib/ipq806x.sh
>>> +++ b/target/linux/ipq806x/base-files/lib/ipq806x.sh
>>> @@ -17,6 +17,9 @@ ipq806x_board_detect() {
>>>  	*"AP148")
>>>  		name="ap148"
>>>  		;;
>>> +	*"D7800")
>>> +		name="d7800"
>>> +		;;
>>>  	*"DB149")
>>>  		name="db149"
>>>  		;;
>>> diff --git a/target/linux/ipq806x/base-files/lib/upgrade/platform.sh
>>> b/target/linux/ipq806x/base-files/lib/upgrade/platform.sh
>>> index c0e19a1..2400376 100644
>>> --- a/target/linux/ipq806x/base-files/lib/upgrade/platform.sh
>>> +++ b/target/linux/ipq806x/base-files/lib/upgrade/platform.sh
>>> @@ -7,6 +7,7 @@ platform_check_image() {
>>>  
>>>  	case "$board" in
>>>  	AP148 |\
>>> +	d7800 |\
>>>  	r7500)
>>>  		nand_do_platform_check $board $1
>>>  		return $?;
>>> @@ -21,6 +22,7 @@ platform_pre_upgrade() {
>>>  
>>>  	case "$board" in
>>>  	AP148 |\
>>> +	d7800 |\
>>>  	r7500)
>>>  		nand_do_upgrade "$1"
>>>  		;;
>>> diff --git a/target/linux/ipq806x/image/Makefile
>>> b/target/linux/ipq806x/image/Makefile
>>> index 14cf442..b880a1b 100644
>>> --- a/target/linux/ipq806x/image/Makefile
>>> +++ b/target/linux/ipq806x/image/Makefile
>>> @@ -103,6 +103,17 @@ define Device/AP148-legacy
>>>  	BOARD_NAME := ap148
>>>  endef
>>>  
>>> +define Device/D7800
>>> +	$(call Device/DniImage)
>>> +	DEVICE_DTS := qcom-ipq8064-d7800
>>> +	KERNEL_SIZE := 2097152
>>> +	NETGEAR_BOARD_ID := D7800
>>> +	NETGEAR_HW_ID := 29764958+0+128+512+4x4+4x4
>>> +	BLOCKSIZE := 128KiB
>>> +	PAGESIZE := 2048
>>> +	BOARD_NAME := d7800
>>> +endef
>>> +
>>>  define Device/DB149
>>>  	$(call Device/FitImage)
>>>  	DEVICE_DTS := qcom-ipq8064-db149
>>> @@ -121,6 +132,6 @@ define Device/R7500
>>>  	BOARD_NAME := r7500
>>>  endef
>>>  
>>> -TARGET_DEVICES += AP148 AP148-legacy DB149 R7500
>>> +TARGET_DEVICES += AP148 AP148-legacy D7800 DB149 R7500
>>>  
>>>  $(eval $(call BuildImage))
>>> diff --git
>>> a/target/linux/ipq806x/patches-3.18/801-ARM-qcom-add-Netgear-Nightha
>>> w
>>> k
>>> -X4-D7
>>> 800-device-tree.patch
>>> b/target/linux/ipq806x/patches-3.18/801-ARM-qcom-add-Netgear-Nightha
>>> w
>>> k
>>> -X4-D7
>>> 800-device-tree.patch
>>> new file mode 100644
>>> index 0000000..ecc1cff
>>> --- /dev/null
>>> +++ b/target/linux/ipq806x/patches-3.18/801-ARM-qcom-add-Netgear-Nig
>>> +++ h
>>> +++ t
>>> +++ ha
>>> +++ wk-X4-D7800-device-tree.patch
>>> @@ -0,0 +1,381 @@
>>> +--- a/arch/arm/boot/dts/Makefile	2015-09-22 18:30:09.033530282 +0530
>>> ++++ b/arch/arm/boot/dts/Makefile	2015-09-23 17:06:44.892947581 +0530
>>> +@@ -362,6 +362,7 @@
>>> + 	qcom-ipq8064-ap148.dtb \
>>> + 	qcom-ipq8064-db149.dtb \
>>> + 	qcom-ipq8064-r7500.dtb \
>>> ++	qcom-ipq8064-d7800.dtb \
>>> + 	qcom-msm8660-surf.dtb \
>>> + 	qcom-msm8960-cdp.dtb \
>>> + 	qcom-msm8974-sony-xperia-honami.dtb
>>> +--- a/arch/arm/boot/dts/qcom-ipq8064-d7800.dts	1970-01-01
>>> 05:30:00.000000000 +0530
>>> ++++ b/arch/arm/boot/dts/qcom-ipq8064-d7800.dts	2015-09-23
>>> 17:06:45.336947567 +0530
>>> +@@ -0,0 +1,368 @@
>>> ++#include "qcom-ipq8064-v1.0.dtsi"
>>> ++
>>> ++#include <dt-bindings/input/input.h>
>>> ++
>>> ++/ {
>>> ++	model = "Netgear Nighthawk X4 D7800";
>>> ++	compatible = "netgear,d7800", "qcom,ipq8064";
>>> ++
>>> ++	memory at 0 {
>>> ++		reg = <0x42000000 0xe000000>;
>>> ++		device_type = "memory";
>>> ++	};
>>> ++
>>> ++	reserved-memory {
>>> ++		#address-cells = <1>;
>>> ++		#size-cells = <1>;
>>> ++		ranges;
>>> ++		rsvd at 41200000 {
>>> ++			reg = <0x41200000 0x300000>;
>>> ++			no-map;
>>> ++		};
>>> ++	};
>>> ++
>>> ++	aliases {
>>> ++		serial0 = &uart4;
>>> ++		mdio-gpio0 = &mdio0;
>>> ++	};
>>> ++
>>> ++	chosen {
>>> ++		bootargs = "rootfstype=squashfs noinitrd";
>>> ++		linux,stdout-path = "serial0:115200n8";
>>> ++	};
>>> ++
>>> ++	soc {
>>> ++		pinmux at 800000 {
>>> ++			i2c4_pins: i2c4_pinmux {
>>> ++				pins = "gpio12", "gpio13";
>>> ++				function = "gsbi4";
>>> ++				bias-disable;
>>> ++			};
>>> ++
>>> ++			pcie0_pins: pcie0_pinmux {
>>> ++				mux {
>>> ++					pins = "gpio3";
>>> ++					function = "pcie1_rst";
>>> ++					drive-strength = <12>;
>>> ++					bias-disable;
>>> ++				};
>>> ++			};
>>> ++
>>> ++			pcie1_pins: pcie1_pinmux {
>>> ++				mux {
>>> ++					pins = "gpio48";
>>> ++					function = "pcie2_rst";
>>> ++					drive-strength = <12>;
>>> ++					bias-disable;
>>> ++				};
>>> ++			};
>>> ++
>>> ++			nand_pins: nand_pins {
>>> ++				mux {
>>> ++					pins = "gpio34", "gpio35", "gpio36",
>>> ++					       "gpio37", "gpio38", "gpio39",
>>> ++					       "gpio40", "gpio41", "gpio42",
>>> ++					       "gpio43", "gpio44", "gpio45",
>>> ++					       "gpio46", "gpio47";
>>> ++					function = "nand";
>>> ++					drive-strength = <10>;
>>> ++					bias-disable;
>>> ++				};
>>> ++				pullups {
>>> ++					pins = "gpio39";
>>> ++					bias-pull-up;
>>> ++				};
>>> ++				hold {
>>> ++					pins = "gpio40", "gpio41", "gpio42",
>>> ++					       "gpio43", "gpio44", "gpio45",
>>> ++					       "gpio46", "gpio47";
>>> ++					bias-bus-hold;
>>> ++				};
>>> ++			};
>>> ++
>>> ++			mdio0_pins: mdio0_pins {
>>> ++				mux {
>>> ++					pins = "gpio0", "gpio1";
>>> ++					function = "gpio";
>>> ++					drive-strength = <8>;
>>> ++					bias-disable;
>>> ++				};
>>> ++			};
>>> ++
>>> ++			rgmii2_pins: rgmii2_pins {
>>> ++				mux {
>>> ++					pins = "gpio27", "gpio28", "gpio29",
>>> "gpio30", "gpio31", "gpio32",
>>> ++					       "gpio51", "gpio52", "gpio59",
>>> "gpio60", "gpio61", "gpio62" ;
>>> ++					function = "rgmii2";
>>> ++					drive-strength = <8>;
>>> ++					bias-disable;
>>> ++				};
>>> ++			};
>>> ++		};
>>> ++
>>> ++		gsbi at 16300000 {
>>> ++			qcom,mode = <GSBI_PROT_I2C_UART>;
>>> ++			status = "ok";
>>> ++			serial at 16340000 {
>>> ++				status = "ok";
>>> ++			};
>>> ++			/*
>>> ++			 * The i2c device on gsbi4 should not be enabled.
>>> ++			 * On ipq806x designs gsbi4 i2c is meant for
>>> exclusive
>>> ++			 * RPM usage. Turning this on in kernel manifests as
>>> ++			 * i2c failure for the RPM.
>>> ++			 */
>>> ++		};
>>> ++
>>> ++		sata-phy at 1b400000 {
>>> ++			status = "ok";
>>> ++		};
>>> ++
>>> ++		sata at 29000000 {
>>> ++			status = "ok";
>>> ++		};
>>> ++
>>> ++		phy at 100f8800 {		/* USB3 port 1 HS phy */
>>> ++			status = "ok";
>>> ++		};
>>> ++
>>> ++		phy at 100f8830 {		/* USB3 port 1 SS phy */
>>> ++			status = "ok";
>>> ++		};
>>> ++
>>> ++		phy at 110f8800 {		/* USB3 port 0 HS phy */
>>> ++			status = "ok";
>>> ++		};
>>> ++
>>> ++		phy at 110f8830 {		/* USB3 port 0 SS phy */
>>> ++			status = "ok";
>>> ++		};
>>> ++
>>> ++		usb30 at 0 {
>>> ++			status = "ok";
>>> ++		};
>>> ++
>>> ++		usb30 at 1 {
>>> ++			status = "ok";
>>> ++		};
>>> ++
>>> ++		pcie0: pci at 1b500000 {
>>> ++			status = "ok";
>>> ++			reset-gpio = <&qcom_pinmux 3 0>;
>>> ++			pinctrl-0 = <&pcie0_pins>;
>>> ++			pinctrl-names = "default";
>>> ++		};
>>> ++
>>> ++		pcie1: pci at 1b700000 {
>>> ++			status = "ok";
>>> ++			reset-gpio = <&qcom_pinmux 48 0>;
>>> ++			pinctrl-0 = <&pcie1_pins>;
>>> ++			pinctrl-names = "default";
>>> ++		};
>>> ++
>>> ++		nand at 1ac00000 {
>>> ++			status = "ok";
>>> ++
>>> ++			pinctrl-0 = <&nand_pins>;
>>> ++			pinctrl-names = "default";
>>> ++
>>> ++			nand-ecc-strength = <4>;
>>> ++			nand-bus-width = <8>;
>>> ++
>>> ++			#address-cells = <1>;
>>> ++			#size-cells = <1>;
>>> ++
>>> ++			qcadata at 0 {
>>> ++				label = "qcadata";
>>> ++				reg = <0x0000000 0x0c80000>;
>>> ++				read-only;
>>> ++			};
>>> ++
>>> ++			APPSBL at c80000 {
>>> ++				label = "APPSBL";
>>> ++				reg = <0x0c80000 0x0500000>;
>>> ++				read-only;
>>> ++			};
>>> ++
>>> ++			APPSBLENV at 1180000 {
>>> ++				label = "APPSBLENV";
>>> ++				reg = <0x1180000 0x0080000>;
>>> ++				read-only;
>>> ++			};
>>> ++
>>> ++			art: art at 1200000 {
>>> ++				label = "art";
>>> ++				reg = <0x1200000 0x0140000>;
>>> ++				read-only;
>>> ++			};
>>> ++
>>> ++			artbak: art at 1340000 {
>>> ++				label = "artbak";
>>> ++				reg = <0x1340000 0x0140000>;
>>> ++				read-only;
>>> ++			};
>>> ++
>>> ++			kernel at 1480000 {
>>> ++				label = "kernel";
>>> ++				reg = <0x1480000 0x0200000>;
>>> ++			};
>>> ++
>>> ++			ubi at 1680000 {
>>> ++				label = "ubi";
>>> ++				reg = <0x1680000 0x1E00000>;
>>> ++			};
>>> ++
>>> ++			netgear at 3480000 {
>>> ++				label = "netgear";
>>> ++				reg = <0x3480000 0x4480000>;
>>> ++				read-only;
>>> ++			};
>>> ++
>>> ++			reserve at 7900000 {
>>> ++				label = "reserve";
>>> ++				reg = <0x7900000 0x0700000>;
>>> ++				read-only;
>>> ++			};
>>> ++
>>> ++			firmware at 1480000 {
>>> ++				label = "firmware";
>>> ++				reg = <0x1480000 0x2000000>;
>>> ++			};
>>> ++
>>> ++		};
>>> ++
>>> ++		mdio0: mdio {
>>> ++			compatible = "virtual,mdio-gpio";
>>> ++			#address-cells = <1>;
>>> ++			#size-cells = <0>;
>>> ++			gpios = <&qcom_pinmux 1 0 &qcom_pinmux 0 0>;
>>> ++			pinctrl-0 = <&mdio0_pins>;
>>> ++			pinctrl-names = "default";
>>> ++
>>> ++			phy0: ethernet-phy at 0 {
>>> ++				device_type = "ethernet-phy";
>>> ++				reg = <0>;
>>> ++				qca,ar8327-initvals = <
>>> ++					0x00004 0x7600000   /* PAD0_MODE */
>>> ++					0x00008 0x1000000   /* PAD5_MODE */
>>> ++					0x0000c 0x80        /* PAD6_MODE */
>>> ++					0x000e4 0xaa545     /* MAC_POWER_SEL
>>> */
>>> ++					0x000e0 0xc74164de  /* SGMII_CTRL */
>>> ++					0x0007c 0x4e        /* PORT0_STATUS
>>> */
>>> ++					0x00094 0x4e        /* PORT6_STATUS
>>> */
>>> ++					>;
>>> ++			};
>>> ++
>>> ++			phy4: ethernet-phy at 4 {
>>> ++				device_type = "ethernet-phy";
>>> ++				reg = <4>;
>>> ++			};
>>> ++		};
>>> ++
>>> ++		gmac1: ethernet at 37200000 {
>>> ++			status = "ok";
>>> ++			phy-mode = "rgmii";
>>> ++			phy-handle = <&phy4>;
>>> ++			qcom,id = <1>;
>>> ++
>>> ++			pinctrl-0 = <&rgmii2_pins>;
>>> ++			pinctrl-names = "default";
>>> ++
>>> ++			mtd-mac-address = <&art 6>;
>>> ++		};
>>> ++
>>> ++		gmac2: ethernet at 37400000 {
>>> ++			status = "ok";
>>> ++			phy-mode = "sgmii";
>>> ++			qcom,id = <2>;
>>> ++
>>> ++			mtd-mac-address = <&art 0>;
>>> ++
>>> ++			fixed-link {
>>> ++				speed = <1000>;
>>> ++				full-duplex;
>>> ++			};
>>> ++		};
>>> ++	};
>>> ++
>>> ++	gpio-keys {
>>> ++		compatible = "gpio-keys";
>>> ++
>>> ++		wifi {
>>> ++			label = "wifi";
>>> ++			gpios = <&qcom_pinmux 6 1>;
>>> ++			linux,code = <KEY_WLAN>;
>>> ++		};
>>> ++
>>> ++		reset {
>>> ++			label = "reset";
>>> ++			gpios = <&qcom_pinmux 54 1>;
>>> ++			linux,code = <KEY_RESTART>;
>>> ++		};
>>> ++
>>> ++		wps {
>>> ++			label = "wps";
>>> ++			gpios = <&qcom_pinmux 65 1>;
>>> ++			linux,code = <KEY_WPS_BUTTON>;
>>> ++		};
>>> ++	};
>>> ++
>>> ++	gpio-leds {
>>> ++		compatible = "gpio-leds";
>>> ++
>>> ++		usb1 {
>>> ++			label = "d7800:amber:usb1";
>>> ++			gpios = <&qcom_pinmux 7 0>;
>>> ++		};
>>> ++
>>> ++		usb3 {
>>> ++			label = "d7800:amber:usb3";
>>> ++			gpios = <&qcom_pinmux 8 0>;
>>> ++		};
>>> ++
>>> ++		status {
>>> ++			label = "d7800:amber:status";
>>> ++			gpios = <&qcom_pinmux 9 0>;
>>> ++		};
>>> ++
>>> ++		internet {
>>> ++			label = "d7800:white:internet";
>>> ++			gpios = <&qcom_pinmux 22 0>;
>>> ++		};
>>> ++
>>> ++		wan {
>>> ++			label = "d7800:white:wan";
>>> ++			gpios = <&qcom_pinmux 23 0>;
>>> ++		};
>>> ++
>>> ++		wps {
>>> ++			label = "d7800:white:wps";
>>> ++			gpios = <&qcom_pinmux 24 0>;
>>> ++		};
>>> ++
>>> ++		esata {
>>> ++			label = "d7800:white:esata";
>>> ++			gpios = <&qcom_pinmux 26 0>;
>>> ++		};
>>> ++
>>> ++		power {
>>> ++			label = "d7800:white:power";
>>> ++			gpios = <&qcom_pinmux 53 0>;
>>> ++			default-state = "on";
>>> ++		};
>>> ++
>>> ++		rfkill {
>>> ++			label = "d7800:white:rfkill";
>>> ++			gpios = <&qcom_pinmux 64 0>;
>>> ++		};
>>> ++
>>> ++		wifi5g {
>>> ++			label = "d7800:white:wifi5g";
>>> ++			gpios = <&qcom_pinmux 67 0>;
>>> ++		};
>>> ++	};
>>> ++};
>>> ++
>>> ++&adm_dma {
>>> ++	status = "ok";
>>> ++};
>>> diff --git a/target/linux/ipq806x/profiles/netgear.mk
>>> b/target/linux/ipq806x/profiles/netgear.mk
>>> index 3402f45..25258cd 100644
>>> --- a/target/linux/ipq806x/profiles/netgear.mk
>>> +++ b/target/linux/ipq806x/profiles/netgear.mk
>>> @@ -6,6 +6,18 @@
>>>  # See /LICENSE for more information.
>>>  #
>>>  
>>> +define Profile/D7800
>>> +	NAME:=Netgear Nighthawk X4 D7800
>>> +	PACKAGES:= \
>>> +		kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-ledtrig-usbdev \
>>> +		kmod-usb3 kmod-usb-dwc3-qcom kmod-usb-phy-qcom-dwc3 \
>>> +		kmod-ath10k wpad-mini ath10k-firmware-qca99x0 endef
>>> +
>>> +define Profile/D7800/Description
>>> +	Package set for the Netgear Nighthawk X4 D7800.
>>> +endef
>>> +
>>>  define Profile/R7500
>>>  	NAME:=Netgear Nighthawk X4 R7500
>>>  	PACKAGES:= \
>>> @@ -17,4 +29,5 @@ endef
>>>  define Profile/R7500/Description
>>>  	Package set for the Netgear Nighthawk X4 R7500.
>>>  endef
>>> +$(eval $(call Profile,D7800))
>>>  $(eval $(call Profile,R7500))
>>> --
>>> 1.9.1
>>> _______________________________________________
>>> openwrt-devel mailing list
>>> openwrt-devel at lists.openwrt.org
>>> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
>>>
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel



More information about the openwrt-devel mailing list