[OpenWrt-Devel] [PATCH] Add support for Netgear D7800
John Crispin
blogic at openwrt.org
Tue Jan 19 03:42:57 EST 2016
please do that.
On 19/01/2016 09:38, Tathagata Das wrote:
> Do you mean to say that I have to prepare the patch against latest code of
> trunk and send that it again?
>
> Regards,
> Tathagata
>
>
> -----Original Message-----
> From: John Crispin [mailto:blogic at openwrt.org]
> Sent: 19 January 2016 14:07
> To: Tathagata Das; openwrt-devel at lists.openwrt.org
> Subject: Re: [OpenWrt-Devel] [PATCH] Add support for Netgear D7800
>
> you patch collides with f177c2c2f956c938045bd53943e3f1c090b5db2b so you will
> have to rebase/send it.
>
>
>
> On 19/01/2016 09:26, Tathagata Das wrote:
>> Hi John,
>>
>> I sent the patch last time using git command and I even received an
>> email from OpenWRT on 12th January 2016.
>>
>> Regards,
>> Tathagata
>>
>>
>> -----Original Message-----
>> From: John Crispin [mailto:blogic at openwrt.org]
>> Sent: 19 January 2016 13:45
>> To: Tathagata Das; openwrt-devel at lists.openwrt.org
>> Subject: Re: [OpenWrt-Devel] [PATCH] Add support for Netgear D7800
>>
>> same as before, we are waiting on you to send a version that applies.
>>
>>
>> patchwork 566597
>> --2016-01-17 06:23:22--
>> http://patchwork.ozlabs.org/patch/566597/mbox/
>> Resolving patchwork.ozlabs.org (patchwork.ozlabs.org)... 103.22.144.67
>> Connecting to patchwork.ozlabs.org
>> (patchwork.ozlabs.org)|103.22.144.67|:80... connected.
>> HTTP request sent, awaiting response... 200 OK
>> Length: unspecified [text/plain]
>> Saving to: `566597.patch'
>>
>> [ <=>
>> ] 12,864 --.-K/s in 0s
>>
>> 2016-01-17 06:23:24 (115 MB/s) - `566597.patch' saved [12864]
>>
>> Applying: Add support for Netgear D7800 Using index info to
>> reconstruct a base tree...
>> <stdin>:109: space before tab in indent.
>> qcom-ipq8064-ap148.dtb \
>> <stdin>:110: space before tab in indent.
>> qcom-ipq8064-db149.dtb \
>> <stdin>:111: space before tab in indent.
>> qcom-ipq8064-r7500.dtb \
>> <stdin>:113: space before tab in indent.
>> qcom-msm8660-surf.dtb \
>> <stdin>:114: space before tab in indent.
>> qcom-msm8960-cdp.dtb \
>> warning: squelched 1 whitespace error
>> warning: 6 lines add whitespace errors.
>> Falling back to patching base and 3-way merge...
>> Auto-merging target/linux/ipq806x/image/Makefile
>> Auto-merging target/linux/ipq806x/base-files/lib/upgrade/platform.sh
>> CONFLICT (content): Merge conflict in
>> target/linux/ipq806x/base-files/lib/upgrade/platform.sh
>> Failed to merge in the changes.
>> Patch failed at 0001 Add support for Netgear D7800 When you have
>> resolved this problem run "git am --resolved".
>> If you would prefer to skip this patch, instead run "git am --skip".
>> To restore the original branch and stop patching run "git am --abort".
>> Unstaged changes after reset:
>> M target/linux/ipq806x/base-files/etc/board.d/01_leds
>> M target/linux/ipq806x/base-files/etc/board.d/02_network
>> M target/linux/ipq806x/base-files/lib/ipq806x.sh
>> M target/linux/ipq806x/base-files/lib/upgrade/platform.sh
>> M target/linux/ipq806x/image/Makefile
>> M target/linux/ipq806x/profiles/netgear.mk
>> applying 566597 FAILED
>>
>>
>> patchwork 569813
>> --2016-01-17 06:22:13--
>> http://patchwork.ozlabs.org/patch/569813/mbox/
>> Resolving patchwork.ozlabs.org (patchwork.ozlabs.org)... 103.22.144.67
>> Connecting to patchwork.ozlabs.org
>> (patchwork.ozlabs.org)|103.22.144.67|:80... connected.
>> HTTP request sent, awaiting response... 200 OK
>> Length: unspecified [text/plain]
>> Saving to: `569813.patch'
>>
>> [ <=>
>> ] 13,088 --.-K/s in 0s
>>
>> 2016-01-17 06:22:14 (172 MB/s) - `569813.patch' saved [13088]
>>
>> Applying: Add support for Netgear D7800
>> fatal: patch fragment without header at line 130: @@ -0,0 +1,381 @@
>> Repository lacks necessary blobs to fall back on 3-way merge.
>> Cannot fall back to three-way merge.
>> Patch failed at 0001 Add support for Netgear D7800 When you have
>> resolved this problem run "git am --resolved".
>> If you would prefer to skip this patch, instead run "git am --skip".
>> To restore the original branch and stop patching run "git am --abort".
>> applying 569813 FAILED
>>
>>
>>
>>
>> On 19/01/2016 07:19, Tathagata Das wrote:
>>> Any update about the patch?
>>>
>>> Regards,
>>> Tathagata
>>>
>>>
>>> -----Original Message-----
>>> From: Tathagata Das [mailto:tathagata at alumnux.com]
>>> Sent: 12 January 2016 20:47
>>> To: openwrt-devel at lists.openwrt.org
>>> Cc: Tathagata Das
>>> Subject: [PATCH] Add support for Netgear D7800
>>>
>>> Signed-off-by: Tathagata Das <tathagata at alumnux.com>
>>> ---
>>> .../linux/ipq806x/base-files/etc/board.d/01_leds | 1 +
>>> .../ipq806x/base-files/etc/board.d/02_network | 1 +
>>> target/linux/ipq806x/base-files/lib/ipq806x.sh | 3 +
>>> .../ipq806x/base-files/lib/upgrade/platform.sh | 2 +
>>> target/linux/ipq806x/image/Makefile | 13 +-
>>> ...dd-Netgear-Nighthawk-X4-D7800-device-tree.patch | 381
>>> +++++++++++++++++++++
>>> target/linux/ipq806x/profiles/netgear.mk | 13 +
>>> 7 files changed, 413 insertions(+), 1 deletion(-) create mode
>>> 100644
>>> target/linux/ipq806x/patches-3.18/801-ARM-qcom-add-Netgear-Nighthawk-
>>> X
>>> 4-D780
>>> 0-device-tree.patch
>>>
>>> diff --git a/target/linux/ipq806x/base-files/etc/board.d/01_leds
>>> b/target/linux/ipq806x/base-files/etc/board.d/01_leds
>>> index 07b5b06..b32c1cc 100755
>>> --- a/target/linux/ipq806x/base-files/etc/board.d/01_leds
>>> +++ b/target/linux/ipq806x/base-files/etc/board.d/01_leds
>>> @@ -11,6 +11,7 @@ board_config_update
>>> board=$(ipq806x_board_name)
>>>
>>> case "$board" in
>>> +d7800 |\
>>> r7500)
>>> ucidef_set_led_usbdev "usb1" "USB 1" "r7500:white:usb1" "1-1"
>>> ucidef_set_led_usbdev "usb2" "USB 2" "r7500:white:usb3" "3-1"
>>> diff --git a/target/linux/ipq806x/base-files/etc/board.d/02_network
>>> b/target/linux/ipq806x/base-files/etc/board.d/02_network
>>> index 1302a55..6e18297 100755
>>> --- a/target/linux/ipq806x/base-files/etc/board.d/02_network
>>> +++ b/target/linux/ipq806x/base-files/etc/board.d/02_network
>>> @@ -13,6 +13,7 @@ board=$(ipq806x_board_name)
>>>
>>> case "$board" in
>>> ap148 |\
>>> +d7800 |\
>>> r7500)
>>> ucidef_add_switch "switch0" \
>>> "1:lan" "2:lan" "3:lan" "4:lan" "6 at eth1" "5:wan" "0 at eth0"
>>> diff --git a/target/linux/ipq806x/base-files/lib/ipq806x.sh
>>> b/target/linux/ipq806x/base-files/lib/ipq806x.sh
>>> index 5b27bde..db22708 100644
>>> --- a/target/linux/ipq806x/base-files/lib/ipq806x.sh
>>> +++ b/target/linux/ipq806x/base-files/lib/ipq806x.sh
>>> @@ -17,6 +17,9 @@ ipq806x_board_detect() {
>>> *"AP148")
>>> name="ap148"
>>> ;;
>>> + *"D7800")
>>> + name="d7800"
>>> + ;;
>>> *"DB149")
>>> name="db149"
>>> ;;
>>> diff --git a/target/linux/ipq806x/base-files/lib/upgrade/platform.sh
>>> b/target/linux/ipq806x/base-files/lib/upgrade/platform.sh
>>> index c0e19a1..2400376 100644
>>> --- a/target/linux/ipq806x/base-files/lib/upgrade/platform.sh
>>> +++ b/target/linux/ipq806x/base-files/lib/upgrade/platform.sh
>>> @@ -7,6 +7,7 @@ platform_check_image() {
>>>
>>> case "$board" in
>>> AP148 |\
>>> + d7800 |\
>>> r7500)
>>> nand_do_platform_check $board $1
>>> return $?;
>>> @@ -21,6 +22,7 @@ platform_pre_upgrade() {
>>>
>>> case "$board" in
>>> AP148 |\
>>> + d7800 |\
>>> r7500)
>>> nand_do_upgrade "$1"
>>> ;;
>>> diff --git a/target/linux/ipq806x/image/Makefile
>>> b/target/linux/ipq806x/image/Makefile
>>> index 14cf442..b880a1b 100644
>>> --- a/target/linux/ipq806x/image/Makefile
>>> +++ b/target/linux/ipq806x/image/Makefile
>>> @@ -103,6 +103,17 @@ define Device/AP148-legacy
>>> BOARD_NAME := ap148
>>> endef
>>>
>>> +define Device/D7800
>>> + $(call Device/DniImage)
>>> + DEVICE_DTS := qcom-ipq8064-d7800
>>> + KERNEL_SIZE := 2097152
>>> + NETGEAR_BOARD_ID := D7800
>>> + NETGEAR_HW_ID := 29764958+0+128+512+4x4+4x4
>>> + BLOCKSIZE := 128KiB
>>> + PAGESIZE := 2048
>>> + BOARD_NAME := d7800
>>> +endef
>>> +
>>> define Device/DB149
>>> $(call Device/FitImage)
>>> DEVICE_DTS := qcom-ipq8064-db149
>>> @@ -121,6 +132,6 @@ define Device/R7500
>>> BOARD_NAME := r7500
>>> endef
>>>
>>> -TARGET_DEVICES += AP148 AP148-legacy DB149 R7500
>>> +TARGET_DEVICES += AP148 AP148-legacy D7800 DB149 R7500
>>>
>>> $(eval $(call BuildImage))
>>> diff --git
>>> a/target/linux/ipq806x/patches-3.18/801-ARM-qcom-add-Netgear-Nighthaw
>>> k
>>> -X4-D7
>>> 800-device-tree.patch
>>> b/target/linux/ipq806x/patches-3.18/801-ARM-qcom-add-Netgear-Nighthaw
>>> k
>>> -X4-D7
>>> 800-device-tree.patch
>>> new file mode 100644
>>> index 0000000..ecc1cff
>>> --- /dev/null
>>> +++ b/target/linux/ipq806x/patches-3.18/801-ARM-qcom-add-Netgear-Nigh
>>> +++ t
>>> +++ ha
>>> +++ wk-X4-D7800-device-tree.patch
>>> @@ -0,0 +1,381 @@
>>> +--- a/arch/arm/boot/dts/Makefile 2015-09-22 18:30:09.033530282 +0530
>>> ++++ b/arch/arm/boot/dts/Makefile 2015-09-23 17:06:44.892947581 +0530
>>> +@@ -362,6 +362,7 @@
>>> + qcom-ipq8064-ap148.dtb \
>>> + qcom-ipq8064-db149.dtb \
>>> + qcom-ipq8064-r7500.dtb \
>>> ++ qcom-ipq8064-d7800.dtb \
>>> + qcom-msm8660-surf.dtb \
>>> + qcom-msm8960-cdp.dtb \
>>> + qcom-msm8974-sony-xperia-honami.dtb
>>> +--- a/arch/arm/boot/dts/qcom-ipq8064-d7800.dts 1970-01-01
>>> 05:30:00.000000000 +0530
>>> ++++ b/arch/arm/boot/dts/qcom-ipq8064-d7800.dts 2015-09-23
>>> 17:06:45.336947567 +0530
>>> +@@ -0,0 +1,368 @@
>>> ++#include "qcom-ipq8064-v1.0.dtsi"
>>> ++
>>> ++#include <dt-bindings/input/input.h>
>>> ++
>>> ++/ {
>>> ++ model = "Netgear Nighthawk X4 D7800";
>>> ++ compatible = "netgear,d7800", "qcom,ipq8064";
>>> ++
>>> ++ memory at 0 {
>>> ++ reg = <0x42000000 0xe000000>;
>>> ++ device_type = "memory";
>>> ++ };
>>> ++
>>> ++ reserved-memory {
>>> ++ #address-cells = <1>;
>>> ++ #size-cells = <1>;
>>> ++ ranges;
>>> ++ rsvd at 41200000 {
>>> ++ reg = <0x41200000 0x300000>;
>>> ++ no-map;
>>> ++ };
>>> ++ };
>>> ++
>>> ++ aliases {
>>> ++ serial0 = &uart4;
>>> ++ mdio-gpio0 = &mdio0;
>>> ++ };
>>> ++
>>> ++ chosen {
>>> ++ bootargs = "rootfstype=squashfs noinitrd";
>>> ++ linux,stdout-path = "serial0:115200n8";
>>> ++ };
>>> ++
>>> ++ soc {
>>> ++ pinmux at 800000 {
>>> ++ i2c4_pins: i2c4_pinmux {
>>> ++ pins = "gpio12", "gpio13";
>>> ++ function = "gsbi4";
>>> ++ bias-disable;
>>> ++ };
>>> ++
>>> ++ pcie0_pins: pcie0_pinmux {
>>> ++ mux {
>>> ++ pins = "gpio3";
>>> ++ function = "pcie1_rst";
>>> ++ drive-strength = <12>;
>>> ++ bias-disable;
>>> ++ };
>>> ++ };
>>> ++
>>> ++ pcie1_pins: pcie1_pinmux {
>>> ++ mux {
>>> ++ pins = "gpio48";
>>> ++ function = "pcie2_rst";
>>> ++ drive-strength = <12>;
>>> ++ bias-disable;
>>> ++ };
>>> ++ };
>>> ++
>>> ++ nand_pins: nand_pins {
>>> ++ mux {
>>> ++ pins = "gpio34", "gpio35", "gpio36",
>>> ++ "gpio37", "gpio38", "gpio39",
>>> ++ "gpio40", "gpio41", "gpio42",
>>> ++ "gpio43", "gpio44", "gpio45",
>>> ++ "gpio46", "gpio47";
>>> ++ function = "nand";
>>> ++ drive-strength = <10>;
>>> ++ bias-disable;
>>> ++ };
>>> ++ pullups {
>>> ++ pins = "gpio39";
>>> ++ bias-pull-up;
>>> ++ };
>>> ++ hold {
>>> ++ pins = "gpio40", "gpio41", "gpio42",
>>> ++ "gpio43", "gpio44", "gpio45",
>>> ++ "gpio46", "gpio47";
>>> ++ bias-bus-hold;
>>> ++ };
>>> ++ };
>>> ++
>>> ++ mdio0_pins: mdio0_pins {
>>> ++ mux {
>>> ++ pins = "gpio0", "gpio1";
>>> ++ function = "gpio";
>>> ++ drive-strength = <8>;
>>> ++ bias-disable;
>>> ++ };
>>> ++ };
>>> ++
>>> ++ rgmii2_pins: rgmii2_pins {
>>> ++ mux {
>>> ++ pins = "gpio27", "gpio28", "gpio29",
>>> "gpio30", "gpio31", "gpio32",
>>> ++ "gpio51", "gpio52", "gpio59",
>>> "gpio60", "gpio61", "gpio62" ;
>>> ++ function = "rgmii2";
>>> ++ drive-strength = <8>;
>>> ++ bias-disable;
>>> ++ };
>>> ++ };
>>> ++ };
>>> ++
>>> ++ gsbi at 16300000 {
>>> ++ qcom,mode = <GSBI_PROT_I2C_UART>;
>>> ++ status = "ok";
>>> ++ serial at 16340000 {
>>> ++ status = "ok";
>>> ++ };
>>> ++ /*
>>> ++ * The i2c device on gsbi4 should not be enabled.
>>> ++ * On ipq806x designs gsbi4 i2c is meant for
>>> exclusive
>>> ++ * RPM usage. Turning this on in kernel manifests as
>>> ++ * i2c failure for the RPM.
>>> ++ */
>>> ++ };
>>> ++
>>> ++ sata-phy at 1b400000 {
>>> ++ status = "ok";
>>> ++ };
>>> ++
>>> ++ sata at 29000000 {
>>> ++ status = "ok";
>>> ++ };
>>> ++
>>> ++ phy at 100f8800 { /* USB3 port 1 HS phy */
>>> ++ status = "ok";
>>> ++ };
>>> ++
>>> ++ phy at 100f8830 { /* USB3 port 1 SS phy */
>>> ++ status = "ok";
>>> ++ };
>>> ++
>>> ++ phy at 110f8800 { /* USB3 port 0 HS phy */
>>> ++ status = "ok";
>>> ++ };
>>> ++
>>> ++ phy at 110f8830 { /* USB3 port 0 SS phy */
>>> ++ status = "ok";
>>> ++ };
>>> ++
>>> ++ usb30 at 0 {
>>> ++ status = "ok";
>>> ++ };
>>> ++
>>> ++ usb30 at 1 {
>>> ++ status = "ok";
>>> ++ };
>>> ++
>>> ++ pcie0: pci at 1b500000 {
>>> ++ status = "ok";
>>> ++ reset-gpio = <&qcom_pinmux 3 0>;
>>> ++ pinctrl-0 = <&pcie0_pins>;
>>> ++ pinctrl-names = "default";
>>> ++ };
>>> ++
>>> ++ pcie1: pci at 1b700000 {
>>> ++ status = "ok";
>>> ++ reset-gpio = <&qcom_pinmux 48 0>;
>>> ++ pinctrl-0 = <&pcie1_pins>;
>>> ++ pinctrl-names = "default";
>>> ++ };
>>> ++
>>> ++ nand at 1ac00000 {
>>> ++ status = "ok";
>>> ++
>>> ++ pinctrl-0 = <&nand_pins>;
>>> ++ pinctrl-names = "default";
>>> ++
>>> ++ nand-ecc-strength = <4>;
>>> ++ nand-bus-width = <8>;
>>> ++
>>> ++ #address-cells = <1>;
>>> ++ #size-cells = <1>;
>>> ++
>>> ++ qcadata at 0 {
>>> ++ label = "qcadata";
>>> ++ reg = <0x0000000 0x0c80000>;
>>> ++ read-only;
>>> ++ };
>>> ++
>>> ++ APPSBL at c80000 {
>>> ++ label = "APPSBL";
>>> ++ reg = <0x0c80000 0x0500000>;
>>> ++ read-only;
>>> ++ };
>>> ++
>>> ++ APPSBLENV at 1180000 {
>>> ++ label = "APPSBLENV";
>>> ++ reg = <0x1180000 0x0080000>;
>>> ++ read-only;
>>> ++ };
>>> ++
>>> ++ art: art at 1200000 {
>>> ++ label = "art";
>>> ++ reg = <0x1200000 0x0140000>;
>>> ++ read-only;
>>> ++ };
>>> ++
>>> ++ artbak: art at 1340000 {
>>> ++ label = "artbak";
>>> ++ reg = <0x1340000 0x0140000>;
>>> ++ read-only;
>>> ++ };
>>> ++
>>> ++ kernel at 1480000 {
>>> ++ label = "kernel";
>>> ++ reg = <0x1480000 0x0200000>;
>>> ++ };
>>> ++
>>> ++ ubi at 1680000 {
>>> ++ label = "ubi";
>>> ++ reg = <0x1680000 0x1E00000>;
>>> ++ };
>>> ++
>>> ++ netgear at 3480000 {
>>> ++ label = "netgear";
>>> ++ reg = <0x3480000 0x4480000>;
>>> ++ read-only;
>>> ++ };
>>> ++
>>> ++ reserve at 7900000 {
>>> ++ label = "reserve";
>>> ++ reg = <0x7900000 0x0700000>;
>>> ++ read-only;
>>> ++ };
>>> ++
>>> ++ firmware at 1480000 {
>>> ++ label = "firmware";
>>> ++ reg = <0x1480000 0x2000000>;
>>> ++ };
>>> ++
>>> ++ };
>>> ++
>>> ++ mdio0: mdio {
>>> ++ compatible = "virtual,mdio-gpio";
>>> ++ #address-cells = <1>;
>>> ++ #size-cells = <0>;
>>> ++ gpios = <&qcom_pinmux 1 0 &qcom_pinmux 0 0>;
>>> ++ pinctrl-0 = <&mdio0_pins>;
>>> ++ pinctrl-names = "default";
>>> ++
>>> ++ phy0: ethernet-phy at 0 {
>>> ++ device_type = "ethernet-phy";
>>> ++ reg = <0>;
>>> ++ qca,ar8327-initvals = <
>>> ++ 0x00004 0x7600000 /* PAD0_MODE */
>>> ++ 0x00008 0x1000000 /* PAD5_MODE */
>>> ++ 0x0000c 0x80 /* PAD6_MODE */
>>> ++ 0x000e4 0xaa545 /* MAC_POWER_SEL
>>> */
>>> ++ 0x000e0 0xc74164de /* SGMII_CTRL */
>>> ++ 0x0007c 0x4e /* PORT0_STATUS
>>> */
>>> ++ 0x00094 0x4e /* PORT6_STATUS
>>> */
>>> ++ >;
>>> ++ };
>>> ++
>>> ++ phy4: ethernet-phy at 4 {
>>> ++ device_type = "ethernet-phy";
>>> ++ reg = <4>;
>>> ++ };
>>> ++ };
>>> ++
>>> ++ gmac1: ethernet at 37200000 {
>>> ++ status = "ok";
>>> ++ phy-mode = "rgmii";
>>> ++ phy-handle = <&phy4>;
>>> ++ qcom,id = <1>;
>>> ++
>>> ++ pinctrl-0 = <&rgmii2_pins>;
>>> ++ pinctrl-names = "default";
>>> ++
>>> ++ mtd-mac-address = <&art 6>;
>>> ++ };
>>> ++
>>> ++ gmac2: ethernet at 37400000 {
>>> ++ status = "ok";
>>> ++ phy-mode = "sgmii";
>>> ++ qcom,id = <2>;
>>> ++
>>> ++ mtd-mac-address = <&art 0>;
>>> ++
>>> ++ fixed-link {
>>> ++ speed = <1000>;
>>> ++ full-duplex;
>>> ++ };
>>> ++ };
>>> ++ };
>>> ++
>>> ++ gpio-keys {
>>> ++ compatible = "gpio-keys";
>>> ++
>>> ++ wifi {
>>> ++ label = "wifi";
>>> ++ gpios = <&qcom_pinmux 6 1>;
>>> ++ linux,code = <KEY_WLAN>;
>>> ++ };
>>> ++
>>> ++ reset {
>>> ++ label = "reset";
>>> ++ gpios = <&qcom_pinmux 54 1>;
>>> ++ linux,code = <KEY_RESTART>;
>>> ++ };
>>> ++
>>> ++ wps {
>>> ++ label = "wps";
>>> ++ gpios = <&qcom_pinmux 65 1>;
>>> ++ linux,code = <KEY_WPS_BUTTON>;
>>> ++ };
>>> ++ };
>>> ++
>>> ++ gpio-leds {
>>> ++ compatible = "gpio-leds";
>>> ++
>>> ++ usb1 {
>>> ++ label = "d7800:amber:usb1";
>>> ++ gpios = <&qcom_pinmux 7 0>;
>>> ++ };
>>> ++
>>> ++ usb3 {
>>> ++ label = "d7800:amber:usb3";
>>> ++ gpios = <&qcom_pinmux 8 0>;
>>> ++ };
>>> ++
>>> ++ status {
>>> ++ label = "d7800:amber:status";
>>> ++ gpios = <&qcom_pinmux 9 0>;
>>> ++ };
>>> ++
>>> ++ internet {
>>> ++ label = "d7800:white:internet";
>>> ++ gpios = <&qcom_pinmux 22 0>;
>>> ++ };
>>> ++
>>> ++ wan {
>>> ++ label = "d7800:white:wan";
>>> ++ gpios = <&qcom_pinmux 23 0>;
>>> ++ };
>>> ++
>>> ++ wps {
>>> ++ label = "d7800:white:wps";
>>> ++ gpios = <&qcom_pinmux 24 0>;
>>> ++ };
>>> ++
>>> ++ esata {
>>> ++ label = "d7800:white:esata";
>>> ++ gpios = <&qcom_pinmux 26 0>;
>>> ++ };
>>> ++
>>> ++ power {
>>> ++ label = "d7800:white:power";
>>> ++ gpios = <&qcom_pinmux 53 0>;
>>> ++ default-state = "on";
>>> ++ };
>>> ++
>>> ++ rfkill {
>>> ++ label = "d7800:white:rfkill";
>>> ++ gpios = <&qcom_pinmux 64 0>;
>>> ++ };
>>> ++
>>> ++ wifi5g {
>>> ++ label = "d7800:white:wifi5g";
>>> ++ gpios = <&qcom_pinmux 67 0>;
>>> ++ };
>>> ++ };
>>> ++};
>>> ++
>>> ++&adm_dma {
>>> ++ status = "ok";
>>> ++};
>>> diff --git a/target/linux/ipq806x/profiles/netgear.mk
>>> b/target/linux/ipq806x/profiles/netgear.mk
>>> index 3402f45..25258cd 100644
>>> --- a/target/linux/ipq806x/profiles/netgear.mk
>>> +++ b/target/linux/ipq806x/profiles/netgear.mk
>>> @@ -6,6 +6,18 @@
>>> # See /LICENSE for more information.
>>> #
>>>
>>> +define Profile/D7800
>>> + NAME:=Netgear Nighthawk X4 D7800
>>> + PACKAGES:= \
>>> + kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-ledtrig-usbdev \
>>> + kmod-usb3 kmod-usb-dwc3-qcom kmod-usb-phy-qcom-dwc3 \
>>> + kmod-ath10k wpad-mini ath10k-firmware-qca99x0 endef
>>> +
>>> +define Profile/D7800/Description
>>> + Package set for the Netgear Nighthawk X4 D7800.
>>> +endef
>>> +
>>> define Profile/R7500
>>> NAME:=Netgear Nighthawk X4 R7500
>>> PACKAGES:= \
>>> @@ -17,4 +29,5 @@ endef
>>> define Profile/R7500/Description
>>> Package set for the Netgear Nighthawk X4 R7500.
>>> endef
>>> +$(eval $(call Profile,D7800))
>>> $(eval $(call Profile,R7500))
>>> --
>>> 1.9.1
>>> _______________________________________________
>>> openwrt-devel mailing list
>>> openwrt-devel at lists.openwrt.org
>>> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
>>>
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list