[OpenWrt-Devel] OpenWrt /etc/hotplug.d/button/00-wps

[John kerry]

Please can anyone reply

On Tue, Sep 15, 2015 at 2:16 PM, John kerry <kerry9842 at gmail.com> wrote:

> Hi,
>
> I have written the following condition in /etc/hotplug.d/button/50-wps file
> if [ "$ACTION" = "pressed" -a "$BUTTON" = "lanwifi" ]; then
>         echo "" > /dev/console
>         echo "SWITCH TO RJ45" > /dev/console
>         echo "255" >
> /sys/devices/platform/leds-gpio/leds/db120:green:status/brightness
> fi
>
> So Now whenever i pressed button the Status LED will glow otherwise OFF.
>
> But i need to check one more condition eth0 link UP/Down, If UP only i
> have to ON the status LED.
>
> Could anyone please tell how i can add such condition in this script.
>
> Regards,
>
>
>
> On Tue, Sep 15, 2015 at 2:00 PM, John kerry <kerry9842 at gmail.com> wrote:
>
>> Hi,
>>
>> I have to write some condition in
>> /etc/hotplug.d/button/50-wps/ file
>>
>> I have to configure cat /etc/hotplug.d/button/00-wps file for following
>> condition:
>> if [ "$BUTTON" = "BTN_2" ] && [ "$ACTION" = "pressed" ]; then
>>
>> I have to check eth0.1 if link is up then have ON status led otherwise
>> OFF.
>>
>> I am able ON/OFF Status LED based on eth0 link up/down using below
>>
>> config led 'led_status'
>>         option name 'STATUS'
>>         option interval '50'
>>         option sysfs 'wndr3700:green:status'
>>         option default '0'
>>         option trigger 'netdev'
>>         option mode 'link'
>>         option dev 'eth0'
>>
>>  But i need to check first above button that is pressed only i have to
>> check eth0 status.
>>
>> I am not able to mix both condition in one place.
>>
>> Could anyone please reply, how i can add such condition in that file.
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.infradead.org/pipermail/openwrt-devel/attachments/20150915/95433747/attachment.htm>
-------------- next part --------------
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel