Mark lantiq and omap as source only

[Felix Baumann]

Am 3. Mai 2023 20:30:11 MESZ schrieb Nick <vincent at systemli.org>:
>
>On 5/3/23 19:23, Aleksander Bajkowski wrote:
>> 
>> W dniu 03.05.2023 o 19:11, Nick pisze:
>>> On 5/3/23 11:07, Nick wrote:
>>> 
>>>> I will also try to fetch me some lantiq device from somewhere to support fixing the fdb issues and re-adding it back to 23.X or fixing it before the branch. 
>>> I organized myself now a **FRITZ!Box 7320** and **TP Link TD-W8970**. So if anyone wants me to test anything just write me. Meanwhile I will also have a look at this issue.
>> 
>> 
>> This issue only affects the xrx200 target (gswip driver). AVM 7320 is supported by the xway subtarget and has built-in tantos switch.
>The TP Link TD-W8970 is a xrx200 target. :)
>So we just could have disabled the xrx200 target instead of setting the whole target to source only?
>
>I made a mistake, I have a 7330. However, I have also some network issues with this device (no connectity to device but a link).
>
>Bests
>Nick
>
>_______________________________________________
>openwrt-devel mailing list
>openwrt-devel at lists.openwrt.org
>https://lists.openwrt.org/mailman/listinfo/openwrt-devel

The Fritz!Box 7330 has always had broken ethernet.
https://github.com/freifunk-gluon/gluon/issues/1943
https://github.com/openwrt/openwrt/issues/7125

I suppose you could fix that as well, but maybe you should focus on 5.15 on the TD-W8970.


Regards
Felix Baumann