[PATCH v2] mvebu: add support for Fortinet FortiGate 50E

INAGAKI Hiroshi musashino.open at gmail.com
Wed Mar 1 20:13:57 PST 2023


Hi Mark,

On 2023/03/02 4:47, Mark Thurston wrote:
>
>   ---- On Wed, 01 Mar 2023 16:01:50 +0000  INAGAKI Hiroshi  wrote ---
>   > Fortinet FortiGate 50E (FG-50E) is a UTM, based on Armada 385 (88F6820).
>   >
>   > Specification:
>   >
>   > - SoC          : Marvell Armada 385 88F6820
>   > - RAM          : DDR3 2 GiB (4x Micron MT41K512M8DA-107, "D9SGQ")
>   > - Flash        : SPI-NOR 128 MiB (Macronix MX66L1G45GMI-10G)
>   > - Ethernet     : 7x 10/100/1000 Mbps
>   >   - LAN 1-5    : Marvell 88E6176
>   >   - WAN 1, 2   : Marvell 88E1512 (2x)
>   > - LEDs/Keys    : 18x/1x
>   > - UART         : "CONSOLE" port (RJ-45, RS-232C level)
>   >   - port       : ttyS0
>   >   - settings   : 9600bps 8n1
>   >   - assignment : 1:NC , 2:NC , 3:TXD, 4:GND,
>   >                  5:GND, 6:RXD, 7:NC , 8:NC
>   >   - note       : compatible with Cisco console cable
>   > - HW Monitoring: nuvoTon NCT7802Y
>   > - Power        : 12 VDC, 2 A
>   >   - plug       : Molex 5557-02R
>
> I couldn't find the Fortinet FortiGate 50E in the table of hardware.
> Would you like to add it? If not, should I add it based on your description? (I don't have one of these to hand to confirm details).
> https://openwrt.org/supported_devices/adding_to_toh

As for adding to ToH, I hadn't thought of anything yet.
For me, it doesn't matter which one... I'll leave it up to you to decide :)

BTW, adding entry to ToH should be done after the support is merged...

Thanks,
Hiroshi



More information about the openwrt-devel mailing list