[PATCH v2] mvebu: add support for Fortinet FortiGate 50E

[Mark Thurston]

 ---- On Wed, 01 Mar 2023 16:01:50 +0000  INAGAKI Hiroshi  wrote --- 
 > Fortinet FortiGate 50E (FG-50E) is a UTM, based on Armada 385 (88F6820).
 > 
 > Specification:
 > 
 > - SoC          : Marvell Armada 385 88F6820
 > - RAM          : DDR3 2 GiB (4x Micron MT41K512M8DA-107, "D9SGQ")
 > - Flash        : SPI-NOR 128 MiB (Macronix MX66L1G45GMI-10G)
 > - Ethernet     : 7x 10/100/1000 Mbps
 >   - LAN 1-5    : Marvell 88E6176
 >   - WAN 1, 2   : Marvell 88E1512 (2x)
 > - LEDs/Keys    : 18x/1x
 > - UART         : "CONSOLE" port (RJ-45, RS-232C level)
 >   - port       : ttyS0
 >   - settings   : 9600bps 8n1
 >   - assignment : 1:NC , 2:NC , 3:TXD, 4:GND,
 >                  5:GND, 6:RXD, 7:NC , 8:NC
 >   - note       : compatible with Cisco console cable
 > - HW Monitoring: nuvoTon NCT7802Y
 > - Power        : 12 VDC, 2 A
 >   - plug       : Molex 5557-02R

I couldn't find the Fortinet FortiGate 50E in the table of hardware.
Would you like to add it? If not, should I add it based on your description? (I don't have one of these to hand to confirm details).
https://openwrt.org/supported_devices/adding_to_toh