[PATCH] firmware-utils: tplink-safeloader: Add support for Deco M4R V4
Sander Vanheule
sander at svanheule.net
Sat Jan 28 08:09:51 PST 2023
Hi Mark,
On Sun, 2023-01-22 at 12:46 +0100, Mark Ceeha wrote:
> Software version:
> soft_ver:1.0.3 Build 20220426 Rel. 32976
I assume this is the FW image you've based this on?
>
> Partition table:
> 00000000 00040000 fs-uboot
> 00040000 00400000 os-image
> 00440000 00b60000 file-system
> 00fa0000 00000300 default-mac
> 00fa0300 00000100 device-id
> 00fa0400 0000fc00 product-info
> 00fb0000 00004000 group-info
> 00fb4000 0000c000 user-config
> 00fc0000 00010000 device-config
> 00fd0000 00010000 default-config
> 00fe0000 00000800 partition-table
> 00fe0800 00000100 soft-version
> 00fe0900 00000200 support-list
> 00fe0b00 00003000 profile
> 00fe3b00 00000100 extra-para
> 00ff0000 00010000 radio
>
> os-image and file-system is merged.
>
> Signed-off-by: Mark Ceeha <hi at shiz.me>
> ---
> src/tplink-safeloader.c | 36 ++++++++++++++++++++++++++++++++++++
> 1 file changed, 36 insertions(+)
>
> diff --git a/src/tplink-safeloader.c b/src/tplink-safeloader.c
> index ddb5dff..df38193 100644
> --- a/src/tplink-safeloader.c
> +++ b/src/tplink-safeloader.c
> @@ -1611,6 +1611,41 @@ static struct device_info boards[] = {
> .first_sysupgrade_partition = "os-image",
> .last_sysupgrade_partition = "file-system",
> },
> + /** Firmware layout for the Deco M4R v4 */
Please leave an empty line between devices.
> + {
> + .id = "DECO-M4R-V4",
> + .vendor = "",
> + .support_list =
> + "SupportList:\n"
> + "{product_name:M4R,product_ver:4.0.0,special_id:555300
> 00}\n"
> + "{product_name:M4R,product_ver:4.0.0,special_id:455500
> 00}\n"
> + "{product_name:M4R,product_ver:4.0.0,special_id:4A5000
> 00}\n"
> + "{product_name:M4R,product_ver:4.0.0,special_id:423400
> 00}\n"
> + "{product_name:M4R,product_ver:4.0.0,special_id:5A4700
> 00}\n",
> + .part_trail = 0x00,
> + .soft_ver = SOFT_VER_TEXT("soft_ver:1.0.2\n"),
This is different from the version above. Does the device require this version
as a lower bound? Normally, usage of SOFT_VER_DEFAULT is preferred.
> +
> + .partitions = {
> + {"fs-uboot", 0x00000, 0x40000},
> + {"firmware", 0x40000, 0xf60000},
> + {"default-mac", 0xfa0000, 0x00300},
> + {"device-id", 0xfa0300, 0x00100},
> + {"product-info", 0xfa0400, 0x0fc00},
> + {"group-info", 0xfb0000, 0x04000},
> + {"user-config", 0xfb4000, 0x0c000},
> + {"device-config", 0xfc0000, 0x10000},
> + {"default-config", 0xfd0000, 0x10000},
> + {"partition-table", 0xfe0000, 0x00800},
> + {"soft-version", 0xfe0800, 0x00100},
> + {"support-list", 0xfe0900, 0x00200},
> + {"profile", 0xfe0b00, 0x03000},
> + {"extra-para", 0xfe3b00, 0x00100},
> + {"radio", 0xff0000, 0x10000},
> + {NULL, 0, 0}
> + },
> + .first_sysupgrade_partition = "os-image",
> + .last_sysupgrade_partition = "file-system",
> + },
>
> /** Firmware layout for the Deco S4 v2 */
> {
> @@ -3524,6 +3559,7 @@ static void build_image(const char *output,
> strcasecmp(info->id, "ARCHER-C60-V2") == 0 ||
> strcasecmp(info->id, "ARCHER-C60-V3") == 0 ||
> strcasecmp(info->id, "ARCHER-C6U-V1") == 0 ||
> + strcasecmp(info->id, "DECO-M4R-V4") == 0 ||
> strcasecmp(info->id, "ARCHER-C6-V3") == 0 ||
Please use alphabetical sorting and put "DECO-M4R-V4" after "ARCHER-C6-V3".
Best,
Sander
More information about the openwrt-devel
mailing list