Installing OpenWRt on the ZBT WG3526

Brice GIBOUDEAU brice at pingus.org
Fri May 6 03:01:11 PDT 2022


On the wg3526 long press on the reset button while you power it and it will open up a web page to recover OS on default IP address.


Envoyé de mon iPhone

> Le 6 mai 2022 à 11:33, Enrico Mioso <mrkiko.rs at gmail.com> a écrit :
> 
> Hello!!
> 
> In the next days i will install OpenWRt on a new ZBT WG3526 device. I used one in the past, but don't remember how the initial installation had to be performed.
> Furthermore, at that time I had "sighed" assistance - that I might not have today.
> 
> My questions are:
> 1) What's the best course of action to switch from stock OpenWrt-based firmware to OpenWrt?
> Should I use sysupgrade with -F -n or is another procedure recommended? Of course, before I would take backup of flash.
> 2) If I should use bootloader to do this, may someone help me out extracting a curl command that would upload the firmware?
> Or is the bootloader working with lynx for upload? I know this is pretty much a matter of luck, and things can change in case-by-case basis.
> 
> Thanks a lot,
> Enrico
> 
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel at lists.openwrt.org
> https://lists.openwrt.org/mailman/listinfo/openwrt-devel


More information about the openwrt-devel mailing list