[PATCH 1/1] tools -> firmware-utils -> Add Linksys E8350 firmware header generator for native openwrt WEB factory image
mail at adrianschmutzler.de
mail at adrianschmutzler.de
Sun Jul 19 16:08:25 EDT 2020
Hi,
> -----Original Message-----
> From: openwrt-devel [mailto:openwrt-devel-bounces at lists.openwrt.org]
> On Behalf Of Todor Colov
> Sent: Sonntag, 19. Juli 2020 10:59
> To: openwrt-devel at lists.openwrt.org
> Cc: Todor Colov <todorcolov at abv.bg>
> Subject: [PATCH 1/1] tools -> firmware-utils -> Add Linksys E8350 firmware
> header generator for native openwrt WEB factory image
This doesn't follow our formal guidelines:
https://openwrt.org/submitting-patches
>
> Signed-off-by: Todor Colov <todorcolov at abv.bg>
> ---
> tools/firmware-utils/Makefile | 4 +-
> .../src/linksys/e8350/addfwhdr.c | 195 ++++++++
> .../src/linksys/e8350/bcmdefs.h | 318 +++++++++++++
> .../src/linksys/e8350/code_pattern.h | 396 ++++++++++++++++
> tools/firmware-utils/src/linksys/e8350/crc.c | 290 ++++++++++++
> tools/firmware-utils/src/linksys/e8350/crc.h | 69 +++
> .../src/linksys/e8350/cyutils.h | 348 ++++++++++++++
> .../src/linksys/e8350/typedefs.h | 447 ++++++++++++++++++
> 8 files changed, 2066 insertions(+), 1 deletion(-)
> create mode 100644 tools/firmware-utils/src/linksys/e8350/addfwhdr.c
> create mode 100644 tools/firmware-utils/src/linksys/e8350/bcmdefs.h
> create mode 100644 tools/firmware-utils/src/linksys/e8350/code_pattern.h
> create mode 100644 tools/firmware-utils/src/linksys/e8350/crc.c
> create mode 100644 tools/firmware-utils/src/linksys/e8350/crc.h
> create mode 100644 tools/firmware-utils/src/linksys/e8350/cyutils.h
> create mode 100644 tools/firmware-utils/src/linksys/e8350/typedefs.h
>
> diff --git a/tools/firmware-utils/Makefile b/tools/firmware-utils/Makefile
> index 3dd9ac5c2c..14b47d1391 100644
> --- a/tools/firmware-utils/Makefile
> +++ b/tools/firmware-utils/Makefile
> @@ -23,6 +23,8 @@ endef
>
> define Host/Compile
> mkdir -p $(HOST_BUILD_DIR)/bin
> + mkdir -p $(HOST_BUILD_DIR)/bin/linksys/e8350
> + $(call cc,linksys/e8350/addfwhdr linksys/e8350/crc )
Are you serious?
Create these files which are named specifically after one device, break the entire logic of this Makefile, and then just fill in a lot of code that is mostly unrelated to that specific device?
Please come back when you take it seriously.
Best
Adrian
> $(call cc,add_header)
> $(call cc,addpattern)
> $(call cc,asustrx)
> @@ -97,7 +99,7 @@ define Host/Compile
> endef
>
> define Host/Install
> - $(INSTALL_BIN) $(HOST_BUILD_DIR)/bin/*
> $(STAGING_DIR_HOST)/bin/
> + $(CP) $(HOST_BUILD_DIR)/bin/* $(STAGING_DIR_HOST)/bin/
> endef
>
> $(eval $(call HostBuild))
> diff --git a/tools/firmware-utils/src/linksys/e8350/addfwhdr.c
> b/tools/firmware-utils/src/linksys/e8350/addfwhdr.c
> new file mode 100644
> index 0000000000..6e2896c62d
> --- /dev/null
> +++ b/tools/firmware-utils/src/linksys/e8350/addfwhdr.c
> @@ -0,0 +1,195 @@
> +#include <stdio.h>
> +#include <string.h>
> +#include <stdlib.h>
> +#include <fcntl.h>
> +#include <unistd.h>
> +#include <sys/stat.h>
> +#include <stdarg.h>
> +#include <getopt.h>
> +#include <time.h>
> +#include <sys/time.h>
> +
> +#include "cyutils.h"
> +#include "code_pattern.h"
> +
> +#include "typedefs.h"
> +
> +#define MAX_BUF 1024
> +#define CRC32_INIT_VALUE 0xffffffff /* Initial CRC32 checksum
> value */
> +
> +extern uint32 crc32(uint8 *pdata, uint nbytes, uint32 crc);
> +
> +int fd, fd_w;
> +
> +void die(const char * str, ...)
> +{
> + va_list args;
> + va_start(args, str);
> + vfprintf(stderr, str, args);
> + fputc('\n', stderr);
> + exit(1);
> +}
> +
> +int
> +fill_null0(int size)
> +{
> + unsigned char buf[1];
> + int i;
> +
> + fprintf(stderr,"Fill null\n");
> +
> + buf[0] = 0xff;
> + for (i=0 ; i< size; i++ )
> + if (write(fd_w, buf, 1) != 1)
> + return 0;
> +
> + return 1;
> +}
> +
> +long
> +file_open(const char *name)
> +{
> + struct stat sb;
> + if ((fd = open(name, O_RDONLY, 0)) < 0){
> + die("Unable to open `%s' : %m", name);
> + }
> +
> + if (fstat (fd, &sb))
> + die("Unable to stat `%s' : %m", name);
> +
> + return sb.st_size;
> +}
> +
> +void usage(void)
> +{
> + die("Usage: addfwhdr [-i|--input] sysupgrade.o [-o|--output]
> code.bin\n");
> +}
> +
> +int main(int argc, char ** argv)
> +{
> + uint input_size,c;
> + char *input_file=NULL, *output_file=NULL;
> + int opt;
> + int option_index=0;
> + int garbage = 0;
> + char *buf = NULL;
> + extern char *optarg;
> + extern int optind, opterr, optopt;
> +
> + struct cbt_fw_header *fwhdr;
> + uint32 crc;
> +
> + static struct option long_options[] =
> + {
> + {"input", 1, 0, 'i'},
> + {"output", 1, 0, 'o'},
> + {"garbage", 0, 0, 'g'},
> + {0, 0, 0, 0}
> + };
> +
> + printf("\n---------- add fw header --------\n");
> +
> + fwhdr = malloc(sizeof(struct cbt_fw_header));
> + memset(fwhdr, 0, sizeof(struct cbt_fw_header));
> +
> + while(1){
> + opt = getopt_long(argc, argv, "i:o:g",long_options,
> &option_index);
> + if(opt == -1)
> + break;
> + switch(opt){
> + case 'h' :
> + usage(); break;
> + case 'i' :
> + input_file = optarg;
> + printf("input file is [%s]\n",input_file); break;
> + case 'o' :
> + output_file = optarg;
> + printf("output file is [%s]\n",output_file);
> break;
> + case 'g' :
> + garbage = 1; break;
> + default :
> + usage();
> + }
> + }
> +
> + if(!input_file || !output_file)
> + {
> + printf("You must specify the input and output file!\n");
> + usage();
> + }
> +
> +
> + unlink(output_file);
> + if ((fd_w = open(output_file,O_RDWR|O_CREAT, S_IREAD |
> S_IWRITE)) < 0){
> + die("Unable to open `%s' : %m", output_file);
> + }
> +
> + fwhdr = malloc(sizeof(struct cbt_fw_header));
> + memset(fwhdr, 0, sizeof(struct cbt_fw_header));
> +
> + memcpy((char *)&fwhdr->magic, FWHDR_MAGIC_STR,
> sizeof(fwhdr->magic));
> +
> + input_size = file_open(input_file);
> + if(!(buf = malloc(input_size)))
> + {
> + perror("malloc");
> + goto fail;
> + }
> + c = read(fd, buf, input_size);
> + fwhdr->len = input_size + sizeof(struct cbt_fw_header);
> +
> + fwhdr->res = fwhdr->res | 0x1;
> +
> + //junzhao add fw build date in cbt_fw_header for calculate MD5
> + #if 0
> + {
> + static char *months[] = {"Jan", "Feb", "Mar", "Apr", "May", "Jun",
> "Jul", "Aug", "Sep", "Oct", "Nov", "Dec"};
> + int year, day, mon=1;
> + char temp[10]={0};
> + unsigned char *p_date = (unsigned char *)&fwhdr->res;
> + int j;
> +
> + sscanf(__DATE__, "%s %d %d", temp, &day, &year);
> +
> + for(j=0;j<12;j++) {
> + if(!strcmp(temp, months[j])) {
> + mon = j+1;
> + break;
> + }
> + }
> + p_date[0]= year-2000;
> + p_date[1]= mon;
> + p_date[2]= day;
> +
> + printf("%s: Build date(20%d-%d-%d)\n", __FUNCTION__,
> p_date[0], p_date[1], p_date[2]);
> +
> + }
> + #endif
> + //end
> +
> + crc = crc32((uint8 *)&fwhdr->res, 4, CRC32_INIT_VALUE);
> + crc = crc32((uint8 *)&buf[0], input_size, crc);
> +
> + fwhdr->crc32 = crc;
> +
> + /* write code pattern header */
> + write(fd_w, fwhdr, sizeof(struct cbt_fw_header));
> +
> + if(write(fd_w, buf, c)!=c)
> + die("Write call failed!\n");
> +
> +#if 0
> + if(garbage == 1){ // add garbage, let image is a
> multiple of 1024, and the web upgrade will ok
> + printf("Add %d bytes garbage\n",1024-32);
> + if(!fill_null0(1024-32))
> + die("error!\n");
> + }
> +#endif
> +fail:
> + if(buf)
> + free(buf);
> + close (fd);
> + close (fd_w);
> +
> + return 0;
> +}
> diff --git a/tools/firmware-utils/src/linksys/e8350/bcmdefs.h
> b/tools/firmware-utils/src/linksys/e8350/bcmdefs.h
> new file mode 100644
> index 0000000000..edd7397892
> --- /dev/null
> +++ b/tools/firmware-utils/src/linksys/e8350/bcmdefs.h
> @@ -0,0 +1,318 @@
> +/*
> + * Misc system wide definitions
> + *
> + * Copyright (C) 2009, Broadcom Corporation
> + * All Rights Reserved.
> + *
> + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO
> WARRANTIES OF ANY
> + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR
> OTHERWISE. BROADCOM
> + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF
> MERCHANTABILITY, FITNESS
> + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS
> SOFTWARE.
> + *
> + * $Id: bcmdefs.h,v 1.1.1.1 2010/11/24 06:37:38 gavin.ke Exp $
> + */
> +
> +#ifndef _bcmdefs_h_
> +#define _bcmdefs_h_
> +
> +/*
> + * One doesn't need to include this file explicitly, gets included automatically
> if
> + * typedefs.h is included.
> + */
> +
> +/* Use BCM_REFERENCE to suppress warnings about intentionally-unused
> function
> + * arguments or local variables.
> + */
> +#define BCM_REFERENCE(data) ((void)data)
> +
> +/* Reclaiming text and data :
> + * The following macros specify special linker sections that can be reclaimed
> + * after a system is considered 'up'.
> + * BCMATTACHFN is also used for detach functions (it's not worth having a
> BCMDETACHFN,
> + * as in most cases, the attach function calls the detach function to clean up
> on error).
> + */
> +#ifdef DONGLEBUILD
> +
> +extern bool bcmreclaimed;
> +
> +#define BCMATTACHDATA(_data) __attribute__ ((__section__
> (".dataini2." #_data))) _data
> +#define BCMATTACHFN(_fn) __attribute__ ((__section__ (".textini2."
> #_fn))) _fn
> +
> +#define BCMPREATTACHDATA(_data) __attribute__ ((__section__
> (".dataini2." #_data))) _data
> +#define BCMPREATTACHFN(_fn) __attribute__ ((__section__
> (".textini2." #_fn))) _fn
> +
> +#if defined(BCMRECLAIM)
> +#define BCMINITDATA(_data) __attribute__ ((__section__
> (".dataini1." #_data))) _data
> +#define BCMINITFN(_fn) __attribute__ ((__section__
> (".textini1." #_fn))) _fn
> +#define CONST
> +#else
> +#define BCMINITDATA(_data) _data
> +#define BCMINITFN(_fn) _fn
> +#define CONST const
> +#endif
> +
> +/* Non-manufacture or internal attach function/dat */
> +#if !defined(WLTEST)
> +#define BCMNMIATTACHFN(_fn) BCMATTACHFN(_fn)
> +#define BCMNMIATTACHDATA(_data) BCMATTACHDATA(_data)
> +#else
> +#define BCMNMIATTACHFN(_fn) _fn
> +#define BCMNMIATTACHDATA(_data) _data
> +#endif
> +
> +#define BCMUNINITFN(_fn) _fn
> +
> +#define BCMFASTPATH
> +
> +#else /* DONGLEBUILD */
> +
> +#define bcmreclaimed 0
> +#define BCMATTACHDATA(_data) _data
> +#define BCMATTACHFN(_fn) _fn
> +#define BCMPREATTACHDATA(_data) _data
> +#define BCMPREATTACHFN(_fn) _fn
> +#define BCMINITDATA(_data) _data
> +#define BCMINITFN(_fn) _fn
> +#define BCMUNINITFN(_fn) _fn
> +#define BCMNMIATTACHFN(_fn) _fn
> +#define BCMNMIATTACHDATA(_data) _data
> +#define CONST const
> +#ifdef mips
> +#define BCMFASTPATH __attribute__
> ((__section__(".text.fastpath")))
> +#else
> +#define BCMFASTPATH
> +#endif
> +
> +#endif /* DONGLEBUILD */
> +
> +#if defined(BCMROMOFFLOAD) || defined(BCMROMBUILD)
> +typedef struct {
> + uint16 esiz;
> + uint16 cnt;
> + void *addr;
> +} bcmromdat_patch_t;
> +#endif
> +
> +/* Put some library data/code into ROM to reduce RAM requirements */
> +#if defined(BCMROMOFFLOAD)
> +#define BCMROMDATA(_data) __attribute__ ((weak, __section__
> (".datarom."#_data))) _data
> +#define BCMROMDAT_NAME(_data) _data
> +#define BCMROMFN(_fn) __attribute__ ((weak, long_call,
> __section__ (".textrom."#_fn))) _fn
> +#define BCMROMDAT_ARYSIZ(data) ARRAYSIZE(data)
> +#define BCMROMDAT_SIZEOF(data) sizeof(data)
> +#define BCMROMDAT_APATCH(data) \
> + const bcmromdat_patch_t BCMROMDATA(data##__bcmpatch) = \
> + { sizeof(data[0]), sizeof(data)/sizeof(data[0]), ((void*)data) };
> +#define BCMROMDAT_SPATCH(data) \
> + const bcmromdat_patch_t BCMROMDATA(data##__bcmpatch) = \
> + { sizeof(data), 1, ((void*)&data) };
> +#define BCMROMFN_NAME(_fn) _fn
> +#define STATIC
> +#elif defined(BCMROMBUILD)
> +#include <bcmjmptbl.h>
> +#define STATIC
> +#else /* !BCMROMBUILD */
> +#define BCMROMDATA(_data) _data
> +#define BCMROMDAT_NAME(_data) _data
> +#define BCMROMFN(_fn) _fn
> +#define BCMROMFN_NAME(_fn) _fn
> +#define STATIC static
> +#define BCMROMDAT_ARYSIZ(data) ARRAYSIZE(data)
> +#define BCMROMDAT_SIZEOF(data) sizeof(data)
> +#define BCMROMDAT_APATCH(data)
> +#define BCMROMDAT_SPATCH(data)
> +#endif /* !BCMROMBUILD */
> +
> +/* Bus types */
> +#define SI_BUS 0 /* SOC Interconnect */
> +#define PCI_BUS 1 /* PCI target */
> +#define PCMCIA_BUS 2 /* PCMCIA target */
> +#define SDIO_BUS 3 /* SDIO target */
> +#define JTAG_BUS 4 /* JTAG */
> +#define USB_BUS 5 /* USB (does not support R/W
> REG) */
> +#define SPI_BUS 6 /* gSPI target */
> +#define RPC_BUS 7 /* RPC target */
> +
> +/* Allows size optimization for single-bus image */
> +#ifdef BCMBUSTYPE
> +#define BUSTYPE(bus) (BCMBUSTYPE)
> +#else
> +#define BUSTYPE(bus) (bus)
> +#endif
> +
> +/* Allows size optimization for single-backplane image */
> +#ifdef BCMCHIPTYPE
> +#define CHIPTYPE(bus) (BCMCHIPTYPE)
> +#else
> +#define CHIPTYPE(bus) (bus)
> +#endif
> +
> +
> +/* Allows size optimization for SPROM support */
> +#if defined(BCMSPROMBUS)
> +#define SPROMBUS (BCMSPROMBUS)
> +#elif defined(SI_PCMCIA_SROM)
> +#define SPROMBUS (PCMCIA_BUS)
> +#else
> +#define SPROMBUS (PCI_BUS)
> +#endif
> +
> +/* Allows size optimization for single-chip image */
> +#ifdef BCMCHIPID
> +#define CHIPID(chip) (BCMCHIPID)
> +#else
> +#define CHIPID(chip) (chip)
> +#endif
> +
> +#ifdef BCMCHIPREV
> +#define CHIPREV(rev) (BCMCHIPREV)
> +#else
> +#define CHIPREV(rev) (rev)
> +#endif
> +
> +/* Defines for DMA Address Width - Shared between OSL and HNDDMA */
> +#define DMADDR_MASK_32 0x0 /* Address mask for 32-bits */
> +#define DMADDR_MASK_30 0xc0000000 /* Address mask for 30-bits */
> +#define DMADDR_MASK_0 0xffffffff /* Address mask for 0-bits (hi-
> part) */
> +
> +#define DMADDRWIDTH_30 30 /* 30-bit addressing capability */
> +#define DMADDRWIDTH_32 32 /* 32-bit addressing capability */
> +#define DMADDRWIDTH_63 63 /* 64-bit addressing capability */
> +#define DMADDRWIDTH_64 64 /* 64-bit addressing capability */
> +
> +#ifdef BCMDMA64OSL
> +typedef struct {
> + uint32 loaddr;
> + uint32 hiaddr;
> +} dma64addr_t;
> +
> +typedef dma64addr_t dmaaddr_t;
> +#define PHYSADDRHI(_pa) ((_pa).hiaddr)
> +#define PHYSADDRHISET(_pa, _val) \
> + do { \
> + (_pa).hiaddr = (_val); \
> + } while (0)
> +#define PHYSADDRLO(_pa) ((_pa).loaddr)
> +#define PHYSADDRLOSET(_pa, _val) \
> + do { \
> + (_pa).loaddr = (_val); \
> + } while (0)
> +
> +#else
> +typedef unsigned long dmaaddr_t;
> +#define PHYSADDRHI(_pa) (0)
> +#define PHYSADDRHISET(_pa, _val)
> +#define PHYSADDRLO(_pa) ((_pa))
> +#define PHYSADDRLOSET(_pa, _val) \
> + do { \
> + (_pa) = (_val); \
> + } while (0)
> +#endif /* BCMDMA64OSL */
> +
> +/* One physical DMA segment */
> +typedef struct {
> + dmaaddr_t addr;
> + uint32 length;
> +} hnddma_seg_t;
> +
> +#if defined(MACOSX)
> +/* In MacOS, the OS API may return large number of segments. Setting this
> number lower
> + * will result in failure of dma map
> + */
> +#define MAX_DMA_SEGS 8
> +#else
> +#define MAX_DMA_SEGS 4
> +#endif
> +
> +
> +typedef struct {
> + void *oshdmah; /* Opaque handle for OSL to store its information */
> + uint origsize; /* Size of the virtual packet */
> + uint nsegs;
> + hnddma_seg_t segs[MAX_DMA_SEGS];
> +} hnddma_seg_map_t;
> +
> +
> +/* packet headroom necessary to accommodate the largest header in the
> system, (i.e TXOFF).
> + * By doing, we avoid the need to allocate an extra buffer for the header
> when bridging to WL.
> + * There is a compile time check in wlc.c which ensure that this value is at
> least as big
> + * as TXOFF. This value is used in dma_rxfill (hnddma.c).
> + */
> +
> +#if defined(BCM_RPC_NOCOPY) || defined(BCM_RCP_TXNOCOPY)
> +/* add 40 bytes to allow for extra RPC header and info */
> +#define BCMEXTRAHDROOM 220
> +#else /* BCM_RPC_NOCOPY || BCM_RPC_TXNOCOPY */
> +#ifdef CTFMAP
> +#define BCMEXTRAHDROOM 176
> +#else /* CTFMAP */
> +#define BCMEXTRAHDROOM 172
> +#endif /* CTFMAP */
> +#endif /* BCM_RPC_NOCOPY || BCM_RPC_TXNOCOPY */
> +
> +/* Headroom required for dongle-to-host communication. Packets
> allocated
> + * locally in the dongle (e.g. for CDC ioctls or RNDIS messages) should
> + * leave this much room in front for low-level message headers which may
> + * be needed to get across the dongle bus to the host. (These messages
> + * don't go over the network, so room for the full WL header above would
> + * be a waste.).
> + */
> +#ifdef BCMUSBDEV
> +#define BCMDONGLEHDRSZ 0
> +#define BCMDONGLEPADSZ 0
> +#else
> +#define BCMDONGLEHDRSZ 12
> +#define BCMDONGLEPADSZ 16
> +#endif
> +
> +#define BCMDONGLEOVERHEAD (BCMDONGLEHDRSZ +
> BCMDONGLEPADSZ)
> +
> +#ifdef BCMDBG
> +
> +#ifndef BCMDBG_ERR
> +#define BCMDBG_ERR
> +#endif /* BCMDBG_ERR */
> +
> +#ifndef BCMDBG_ASSERT
> +#define BCMDBG_ASSERT
> +#endif /* BCMDBG_ASSERT */
> +
> +#endif /* BCMDBG */
> +
> +#if defined(BCMDBG_ASSERT) || defined(BCMASSERT_LOG)
> +#define BCMASSERT_SUPPORT
> +#endif /* BCMDBG_ASSERT || BCMASSERT_LOG */
> +
> +/* Macros for doing definition and get/set of bitfields
> + * Usage example, e.g. a three-bit field (bits 4-6):
> + * #define <NAME>_M BITFIELD_MASK(3)
> + * #define <NAME>_S 4
> + * ...
> + * regval = R_REG(osh, ®s->regfoo);
> + * field = GFIELD(regval, <NAME>);
> + * regval = SFIELD(regval, <NAME>, 1);
> + * W_REG(osh, ®s->regfoo, regval);
> + */
> +#define BITFIELD_MASK(width) \
> + (((unsigned)1 << (width)) - 1)
> +#define GFIELD(val, field) \
> + (((val) >> field ## _S) & field ## _M)
> +#define SFIELD(val, field, bits) \
> + (((val) & (~(field ## _M << field ## _S))) | \
> + ((unsigned)(bits) << field ## _S))
> +
> +/* define BCMSMALL to remove misc features for memory-constrained
> environments */
> +#ifdef BCMSMALL
> +#undef BCMSPACE
> +#define bcmspace FALSE /* if (bcmspace) code is discarded */
> +#else
> +#define BCMSPACE
> +#define bcmspace TRUE /* if (bcmspace) code is retained */
> +#endif
> +
> +/* Max. nvram variable table size */
> +#define MAXSZ_NVRAM_VARS 4096
> +
> +#define LOCATOR_EXTERN static
> +
> +#endif /* _bcmdefs_h_ */
> diff --git a/tools/firmware-utils/src/linksys/e8350/code_pattern.h
> b/tools/firmware-utils/src/linksys/e8350/code_pattern.h
> new file mode 100644
> index 0000000000..0bbaa1102d
> --- /dev/null
> +++ b/tools/firmware-utils/src/linksys/e8350/code_pattern.h
> @@ -0,0 +1,396 @@
> +#ifndef _CODE_PATTERN_H_
> +#define _CODE_PATTERN_H_
> +
> +#define CODE_ID "U2ND"
> +#define BOOT_PATTERN "EST"
> +#define UP_PMON 1
> +#define UP_MAC 2
> +#define UP_CODE 3
> +#define UP_PIGGY 4
> +#define UP_EOU_KEY 5
> +#define UP_SN 6
> +#define UP_LANG 7
> +#define UP_T_CERT 8
> +#define CMP_T_CERT 9 //for factory test.
> +#define UP_CODE2 10
> +#define UP_FULL_WL 11
> +#define UP_WSC_PIN 12
> +#define UP_COUNTRY 13
> +#define UP_QUAN_BOOT 14
> +#define UP_QUAN_IMAGE 15
> +
> +#define LINKSYS 7
> +#define PCI_OEM 9 // <remove the line>
> +#define ELSA 10 // <remove the line>
> +#define ALLNET 11 // <remove the line>
> +#define REENET 12 // 2003/06/21 <remove the line>
> +#define CISCO 90
> +#define OTHER_OEM 99 // <remove the line>
> +
> +#define ENGLISH 1
> +#define JAPANESE 2
> +#define GERMAN 3
> +#define FRENCH 4
> +#define KOREAN 5
> +
> +#define USA 1
> +#define JAPAN 2
> +#define EUROPE 3
> +#define WW 4
> +#define GERMANY 5
> +#define KOREA 6
> +#define FRANCE 7
> +
> +#define WRT54G 1
> +#define WRT54GS 2
> +#define WRT54V5 3
> +#define DPN 4
> +#define RTA41 5
> +#define WRT54G3G 6
> +#define T_MOBILE 7
> +#define WRT300N 8
> +#define WRT54GL 9
> +#define WRT54GSV4 10
> +#define WRT350N 11
> +#define WRT610N 12
> +#define WRT61XN 13
> +#define E200 14
> +#define E300 15
> +//John
> +#define WRT54GV5 16
> +
> +#define E3200 17
> +#define E4200 18
> +#define E2500 19
> +#define AC2350 20
> +
> +
> +#define CES_M_SERIAL 1
> +#define CES_E_SERIAL 2
> +
> +/***************************************
> + * define OEM *
> + * Don't edit, auto edit by select.sh *
> + ***************************************/
> +#define OEM LINKSYS //LINKSYS
> +//#define OEM PCI_OEM //PCI_OEM
> +//#define OEM ELSA //ELSA
> +//#define OEM ALLNET //ALLNET
> +//#define OEM REENET //REENET
> +//#define OEM OTHER_OEM //OTHER_OEM
> +
> +/***************************************
> + * define MODEL NAME *
> + * Don't edit, auto edit by select.sh *
> + ***************************************/
> +
> +//#define LINKSYS_MODEL E3200 //E3200
> +//#define LINKSYS_MODEL E300 //E300
> +//#define LINKSYS_MODEL E200 //E200
> +//#define LINKSYS_MODEL E4200 //E4200
> +//#define LINKSYS_MODEL E2500 //E2500
> +#define LINKSYS_MODEL AC2350 //AC2350
> +
> +/***************************************
> + * define MODEL SERIAL *
> + * Don't edit, auto edit by select.sh *
> + ***************************************/
> +//#define LINKSYS_MODEL_SERIAL CES_M_SERIAL //CES_M_SERIAL
> +#define LINKSYS_MODEL_SERIAL CES_E_SERIAL //CES_E_SERIAL
> +
> +/***************************************
> + * define country *
> + * LOCALE=COUNTRY = *
> + ***************************************/
> +#define COUNTRY LOCALE
> +#define LOCALE USA
> +//#define LOCALE JAPAN
> +//#define LOCALE EUROPE
> +//#define LOCALE WW
> +//#define LOCALE GERMANY
> +//#define LOCALE FRANCE
> +//#define LOCALE KOREA
> +//#define LOCALE UK
> +
> +/***************************************
> + * define model name and code pattern *
> + * MODEL_NAME = *
> + * CODE_PATTERN = *
> + ***************************************/
> +#if OEM == LINKSYS
> + #define CT_VENDOR "LINKSYS"
> + #define UI_STYLE CISCO
> +
> + #if LINKSYS_MODEL == WRT54GS
> + #define CODE_PATTERN "W54S"
> + #if LOCALE == GERMANY
> + #define MODEL_NAME "WRT54GS-DE"
> + #define MODEL_VERSION ""
> + #elif LOCALE == FRANCE
> + #define MODEL_NAME "WRT54GS-FR"
> + #define MODEL_VERSION ""
> + #elif LOCALE == JAPAN
> + #define MODEL_NAME "WRT54GS-JP"
> + #define MODEL_VERSION ""
> + #else
> + #define MODEL_NAME "WRT54GS"
> + #define MODEL_VERSION "V3.0"
> + #endif
> + #elif LINKSYS_MODEL == WRT54GSV4
> + #define CODE_PATTERN "W54s"
> + #define MODEL_NAME "WRT54GSV4"
> + #define MODEL_VERSION ""
> + #elif LINKSYS_MODEL == DPN //DPN
> + #define CODE_PATTERN "WDPN"
> + #define MODEL_NAME "DPN"
> + #define MODEL_VERSION ""
> + #elif LINKSYS_MODEL == WRT54GV5
> + #define CODE_PATTERN "W54V"
> + #define MODEL_NAME "WRTA54G"
> + #define MODEL_VERSION ""
> + #elif LINKSYS_MODEL == RTA41
> + #define CODE_PATTERN "W54N"
> + #define MODEL_NAME "RTA41"
> + #define MODEL_VERSION ""
> + #elif LINKSYS_MODEL == WRT54G3G
> + #define CODE_PATTERN "W54F"
> + #if LOCALE == EUROPE
> + #define MODEL_NAME "WRT54G3G-EU"
> + #define MODEL_VERSION ""
> + #elif LOCALE == UK
> + #define MODEL_NAME "WRT54G3G-UK"
> + #define MODEL_VERSION ""
> + #else
> + #define MODEL_NAME "WRT54G3G"
> + #define MODEL_VERSION "V1"
> + #endif
> + #elif LINKSYS_MODEL == T_MOBILE
> + #define CODE_PATTERN "W54T"
> + #define MODEL_NAME "WRT54G-TM"
> + #define MODEL_VERSION "V3.0"
> + #elif LINKSYS_MODEL == WRT300N
> + #define CODE_PATTERN "EWCB"
> + #define MODEL_NAME "WRT300N"
> + #define MODEL_VERSION "V1.0"
> + #elif LINKSYS_MODEL == WRT350N
> + #define CODE_PATTERN "EWCG"
> + #define MODEL_NAME "WRT350N"
> + #define MODEL_VERSION "V1.0"
> + #elif LINKSYS_MODEL == WRT54G
> + #define CODE_PATTERN "W54G"
> + #if LOCALE == GERMANY
> + #define MODEL_NAME "WRT54G-DE"
> + #define MODEL_VERSION ""
> + #elif LOCALE == FRANCE
> + #define MODEL_NAME "WRT54G-FR"
> + #define MODEL_VERSION ""
> + #elif LOCALE == JAPAN
> + #define MODEL_NAME "WRT54G-JP"
> + #define MODEL_VERSION ""
> + #else
> + #define MODEL_NAME "WRT54G"
> + #define MODEL_VERSION "V4.0"
> + #endif
> + #elif LINKSYS_MODEL == WRT54GL
> + #define CODE_PATTERN "W54G"
> + #define MODEL_NAME "WRT54GL"
> + #define MODEL_VERSION "V1"
> + #elif LINKSYS_MODEL == WRT610N
> + #define CODE_PATTERN "610N"
> + #define MODEL_NAME "WRT610N"
> + #define MODEL_VERSION "V2" //V1 or V2
> + #elif LINKSYS_MODEL == E200
> + #define CODE_PATTERN "32XN"
> + #define MODEL_NUMBER "E2000"
> + #define MODEL_NAME "Linksys E2000"
> + #define MODEL_VERSION "V1.0"
> + #elif LINKSYS_MODEL == E300
> + #define CODE_PATTERN "61XN"
> + #define MODEL_NUMBER "E3000" //model
> number added by Jemmy 2009.11.17
> + #define MODEL_NAME "Linksys E3000"
> + #define MODEL_VERSION "V1" //V1 or V2
> + #elif LINKSYS_MODEL == E3200
> + #define CODE_PATTERN "3200"
> + #define MODEL_NUMBER "E3200" //model
> number added by zhaoguang 2010.10.25
> + #define MODEL_NAME "Linksys E3200"
> + #define MODEL_VERSION "V1"
> + #elif LINKSYS_MODEL == E4200
> + #define CODE_PATTERN "4200"
> + #define MODEL_NUMBER "E4200" //model
> number added by Jemmy 2009.11.17
> + #define MODEL_NAME "Linksys E4200"
> + #define MODEL_VERSION "V1" //V1 or V2
> + #elif (LINKSYS_MODEL == E2500)
> + #define CODE_PATTERN "25V3"
> + #define MODEL_NUMBER "E2500" //model
> number
> + #define MODEL_NAME "Linksys E2500"
> + #define MODEL_VERSION "V3" //V1 or V2
> + #elif (LINKSYS_MODEL == AC2350)
> + #define CODE_PATTERN "8350"
> + #define MODEL_NUMBER "E8350" //model
> number
> + #define MODEL_NAME "Linksys E8350"
> + #define MODEL_VERSION "V1" //V1 or V2
> +
> + #else
> + #error "You must select a LINKSYS_MODEL!!"
> + #endif
> +
> + #if LINKSYS_MODEL == WRT54G || LINKSYS_MODEL == WRT54GL
> + #define INTEL_FLASH_SUPPORT_VERSION_FROM "v1.41.8"
> + #define BCM4712_CHIP_SUPPORT_VERSION_FROM
> "v1.50.0"
> + #define INTEL_FLASH_SUPPORT_BOOT_VERSION_FROM
> "v1.3"
> + #define BCM4712_CHIP_SUPPORT_BOOT_VERSION_FROM
> "v2.0"
> + #else
> + #define INTEL_FLASH_SUPPORT_VERSION_FROM "v0.00.0"
> + #define BCM4712_CHIP_SUPPORT_VERSION_FROM
> "v0.00.0"
> + #define INTEL_FLASH_SUPPORT_BOOT_VERSION_FROM
> "v0.0"
> + #define BCM4712_CHIP_SUPPORT_BOOT_VERSION_FROM
> "v0.0"
> + #endif
> + #if LINKSYS_MODEL == WRT350N
> + #define WRT350N_SUPPORT_VERSION_FROM "v0.85.3"
>
> + #endif
> +
> +#elif OEM == PCI_OEM
> + #define CODE_PATTERN "W54P"
> + #if LOCALE == JAPAN
> + #define MODEL_NAME "Planex BLW-04G Wireless
> Router"
> + #else
> + #define MODEL_NAME "Advanced Wireless 11g
> Router"
> + #endif
> + #define CT_VENDOR "PCI"
> +#elif OEM == ELSA
> + #define CODE_PATTERN "W54E"
> + #define MODEL_NAME "ELSA WLAN DSL-Router 4P G"
> + #define CT_VENDOR "ELSA"
> +#elif OEM == ALLNET
> + #define CODE_PATTERN "W54A"
> + #define MODEL_NAME "Advanced Wireless 11g Router"
> + #define CT_VENDOR "ALLNET"
> +#elif OEM == REENET
> + #define CODE_PATTERN "W54R"
> + #define MODEL_NAME "RW-IPG500"
> + #define CT_VENDOR "REENET"
> +#elif OEM == OTHER_OEM
> + #define CODE_PATTERN "W54O"
> + #define MODEL_NAME "Advanced Wireless 11g Router"
> + #define CT_VENDOR "OTHER_OEM"
> +#else
> + #error "Your must select a OEM name!!"
> +#endif
> +
> +/***************************************
> + * define language *
> + * LANGUAGE = *
> + * LANG_SEL=EN *
> + * HTTP_CHARSET = *
> + ***************************************/
> +#if LOCALE == JAPAN
> + #define LANGUAGE JAPANESE
> + #define HTTP_CHARSET "shift-jis"
> +#elif LOCALE == GERMANY
> + #define LANGUAGE GERMAN
> + #define HTTP_CHARSET "iso-8859-1"
> +#elif LOCALE == FRANCE
> + #define LANGUAGE FRENCH
> + #define HTTP_CHARSET "iso-8859-1"
> +#elif LOCALE == KOREA
> + #define LANGUAGE KOREAN
> + #define HTTP_CHARSET "euc-kr"
> +#else
> + #define LANGUAGE ENGLISH
> + #define HTTP_CHARSET "iso-8859-1"
> +#endif
> +
> +/***************************************
> + * define wireless max channel *
> + * WL_MAX_CHANNEL = *
> + ***************************************/
> +#if LOCALE == JAPAN || LOCALE == EUROPE || LOCALE == GERMANY ||
> LOCALE == FRANCE
> + #define WL_MAX_CHANNEL "13"
> +#elif OEM == KOREA // <remove the line>
> + #define WL_MAX_CHANNEL "13" // <remove the line>
> +#else
> + #define WL_MAX_CHANNEL "11"
> +#endif
> +
> +/***************************************
> + * define web file path *
> + * WEB_PAGE = *
> + ***************************************/
> +#if OEM == LINKSYS
> +#if UI_STYLE == CISCO
> + #if LOCALE == JAPAN
> + #define WEB_PAGE "cisco_wrt54g_jp"
> + #elif LOCALE == GERMANY
> + #define WEB_PAGE "cisco_wrt54g_de"
> + #elif LOCALE == FRANCE
> + #define WEB_PAGE "cisco_wrt54g_fr"
> + #else
> + #if LINKSYS_MODEL == E200
> + #define WEB_PAGE "ces_m"
> + #elif LINKSYS_MODEL == E300
> + #define WEB_PAGE "ces_m"
> + #elif LINKSYS_MODEL == E3200
> + #define WEB_PAGE "e3200_m"
> + #elif LINKSYS_MODEL == E4200
> + #define WEB_PAGE "e4200_m"
> + #elif (LINKSYS_MODEL == E2500)
> + #define WEB_PAGE "e2500_m"
> + #elif (LINKSYS_MODEL == AC2350)
> + #define WEB_PAGE "ac2350_m"
> + #else
> + #define WEB_PAGE "cisco_wrt54g_m"
> + #endif
> + #endif
> +#else
> + #if LOCALE == JAPAN
> + #define WEB_PAGE "linksys_wrt54g_jp"
> + #else
> + #define WEB_PAGE "linksys_wrt54g_en"
> + #endif
> +#endif
> +#elif OEM == PCI_OEM
> + #if LOCALE == JAPAN
> + #define WEB_PAGE "pci_wrt54g_jp"
> + #else
> + #define WEB_PAGE "pci_wrt54g_en"
> + #endif
> +#elif OEM == ELSA
> + #define WEB_PAGE "elsa_wrt54g_en"
> +#elif OEM == ALLNET
> + #define WEB_PAGE "nonbrand"
> +#elif OEM == REENET
> + #define WEB_PAGE "reenet_wrt54g_kr"
> +#elif OEM == OTHER_OEM
> + #define WEB_PAGE "nonbrand"
> +#endif
> +
> +/***************************************
> + * check LOCALE
> + ***************************************/
> +#if OEM == LINKSYS
> + #if LOCALE != JAPAN && LOCALE != USA && LOCALE != EUROPE && LOCALE
> != GERMANY && LOCALE != FRANCE
> + #error "The LOCALE for LINKSYS is error, must be USA, EUROPE,
> JAPAN, GERMANY or FRANCE"
> + #endif
> +#elif OEM == PCI_OEM
> + #if LOCALE != JAPAN && LOCALE != USA && LOCALE != EUROPE
> + #error "The LOCALE for PCI is error, must be USA or JAPAN"
> + #endif
> +#elif OEM == ELSA
> + #if LOCALE != EUROPE
> + #error "The LOCALE for ELSA is error, must be EUROPE"
> + #endif
> +#elif OEM == ALLNET
> + #if LOCALE != EUROPE
> + #error "The LOCALE for ALLNET is error, must be EUROPE"
> + #endif
> +#elif OEM == REENET
> + #if LOCALE != KOREA
> + #error "The LOCALE for REENET is error, must be KOREA"
> + #endif
> +#elif OEM == OTHER_OEM
> + #if LOCALE != USA && LOCALE != EUROPE
> + #error "The LOCALE for NONBRAND is error, must be USA or
> EUROPE"
> + #endif
> +#endif
> +
> +#endif
> diff --git a/tools/firmware-utils/src/linksys/e8350/crc.c b/tools/firmware-
> utils/src/linksys/e8350/crc.c
> new file mode 100644
> index 0000000000..7d3e641df9
> --- /dev/null
> +++ b/tools/firmware-utils/src/linksys/e8350/crc.c
> @@ -0,0 +1,290 @@
> +/*********************************************************
> **********************
> + * $Id: crc.c,v 1.1.1.1 2010/11/24 06:37:40 gavin.ke Exp $
> + * Copyright 2007, Broadcom Corporation
> + * All Rights Reserved.
> + *
> + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO
> WARRANTIES OF ANY
> + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR
> OTHERWISE. BROADCOM
> + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF
> MERCHANTABILITY, FITNESS
> + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS
> SOFTWARE.
> + * crc.c: utility function to compute various CRCs
> +
> **********************************************************
> ********************/
> +
> +#include "typedefs.h"
> +#include "crc.h"
> +
> +/*********************************************************
> **********************
> + * hcs
> + *
> + * Computes and inserts a header check sum based on crc8 polynomial
> + * below. Unlike a typical crc, the header check sum is inserted 13
> + * bytes from the end of the byte stream (rather than appended to the
> + * end of the byte stream) such that at the receiver a normal checksum
> + * computation over all of the bytes results in a known good value.
> + * Given a constant 12 bytes after the header checksum to the end of
> + * the header, a lookup table can be used to provide the actual value
> + * inserted.
> +
> **********************************************************
> ********************/
> +
> +static uint8 hcs_table[8] = { 0x16, 0x2c, 0x58, 0xb0, 0x37, 0x6e, 0xdc, 0xef};
> +
> +void
> +hcs(
> + uint8 *pheader, /* pointer to array of data to process */
> + uint nbytes /* number of input data bytes to process */
> +)
> +{
> + uint8 hcs0, hcs1;
> + int i;
> +
> + /* run once with zeros in hcs position, 13th byte from the end */
> + pheader[nbytes - 12 - 1] = 0;
> + hcs0 = crc8(pheader, nbytes, CRC8_INIT_VALUE);
> +
> + /* now compute real hcs to insert in place of zeros */
> + hcs1 = 0;
> + for (i = 0; i < 8; i++) {
> + hcs1 ^= ((hcs0 & (1 << i)) != 0 ? hcs_table[i] : 0);
> + }
> + pheader[nbytes - 12 - 1] = hcs1 ^ 0xff;
> + return;
> +}
> +
> +/*********************************************************
> **********************
> + * crc8
> + *
> + * Computes a crc8 over the input data using the polynomial:
> + *
> + * x^8 + x^7 +x^6 + x^4 + x^2 + 1
> + *
> + * The caller provides the initial value (either CRC8_INIT_VALUE
> + * or the previous returned value) to allow for processing of
> + * discontiguous blocks of data. When generating the CRC the
> + * caller is responsible for complementing the final return value
> + * and inserting it into the byte stream. When checking, a final
> + * return value of CRC8_GOOD_VALUE indicates a valid CRC.
> + *
> + * Reference: Dallas Semiconductor Application Note 27
> + * Williams, Ross N., "A Painless Guide to CRC Error Detection Algorithms",
> + * ver 3, Aug 1993, ross at guest.adelaide.edu.au, Rocksoft Pty Ltd.,
> + * ftp://ftp.rocksoft.com/clients/rocksoft/papers/crc_v3.txt
> + *
> +
> **********************************************************
> ********************/
> +
> +static uint8 crc8_table[256] = {
> + 0x00, 0xF7, 0xB9, 0x4E, 0x25, 0xD2, 0x9C, 0x6B,
> + 0x4A, 0xBD, 0xF3, 0x04, 0x6F, 0x98, 0xD6, 0x21,
> + 0x94, 0x63, 0x2D, 0xDA, 0xB1, 0x46, 0x08, 0xFF,
> + 0xDE, 0x29, 0x67, 0x90, 0xFB, 0x0C, 0x42, 0xB5,
> + 0x7F, 0x88, 0xC6, 0x31, 0x5A, 0xAD, 0xE3, 0x14,
> + 0x35, 0xC2, 0x8C, 0x7B, 0x10, 0xE7, 0xA9, 0x5E,
> + 0xEB, 0x1C, 0x52, 0xA5, 0xCE, 0x39, 0x77, 0x80,
> + 0xA1, 0x56, 0x18, 0xEF, 0x84, 0x73, 0x3D, 0xCA,
> + 0xFE, 0x09, 0x47, 0xB0, 0xDB, 0x2C, 0x62, 0x95,
> + 0xB4, 0x43, 0x0D, 0xFA, 0x91, 0x66, 0x28, 0xDF,
> + 0x6A, 0x9D, 0xD3, 0x24, 0x4F, 0xB8, 0xF6, 0x01,
> + 0x20, 0xD7, 0x99, 0x6E, 0x05, 0xF2, 0xBC, 0x4B,
> + 0x81, 0x76, 0x38, 0xCF, 0xA4, 0x53, 0x1D, 0xEA,
> + 0xCB, 0x3C, 0x72, 0x85, 0xEE, 0x19, 0x57, 0xA0,
> + 0x15, 0xE2, 0xAC, 0x5B, 0x30, 0xC7, 0x89, 0x7E,
> + 0x5F, 0xA8, 0xE6, 0x11, 0x7A, 0x8D, 0xC3, 0x34,
> + 0xAB, 0x5C, 0x12, 0xE5, 0x8E, 0x79, 0x37, 0xC0,
> + 0xE1, 0x16, 0x58, 0xAF, 0xC4, 0x33, 0x7D, 0x8A,
> + 0x3F, 0xC8, 0x86, 0x71, 0x1A, 0xED, 0xA3, 0x54,
> + 0x75, 0x82, 0xCC, 0x3B, 0x50, 0xA7, 0xE9, 0x1E,
> + 0xD4, 0x23, 0x6D, 0x9A, 0xF1, 0x06, 0x48, 0xBF,
> + 0x9E, 0x69, 0x27, 0xD0, 0xBB, 0x4C, 0x02, 0xF5,
> + 0x40, 0xB7, 0xF9, 0x0E, 0x65, 0x92, 0xDC, 0x2B,
> + 0x0A, 0xFD, 0xB3, 0x44, 0x2F, 0xD8, 0x96, 0x61,
> + 0x55, 0xA2, 0xEC, 0x1B, 0x70, 0x87, 0xC9, 0x3E,
> + 0x1F, 0xE8, 0xA6, 0x51, 0x3A, 0xCD, 0x83, 0x74,
> + 0xC1, 0x36, 0x78, 0x8F, 0xE4, 0x13, 0x5D, 0xAA,
> + 0x8B, 0x7C, 0x32, 0xC5, 0xAE, 0x59, 0x17, 0xE0,
> + 0x2A, 0xDD, 0x93, 0x64, 0x0F, 0xF8, 0xB6, 0x41,
> + 0x60, 0x97, 0xD9, 0x2E, 0x45, 0xB2, 0xFC, 0x0B,
> + 0xBE, 0x49, 0x07, 0xF0, 0x9B, 0x6C, 0x22, 0xD5,
> + 0xF4, 0x03, 0x4D, 0xBA, 0xD1, 0x26, 0x68, 0x9F
> +};
> +
> +#define CRC_INNER_LOOP(n, c, x) \
> + (c) = ((c) >> 8) ^ crc##n##_table[((c) ^ (x)) & 0xff]
> +
> +uint8
> +crc8(
> + uint8 *pdata, /* pointer to array of data to process */
> + uint nbytes, /* number of input data bytes to process */
> + uint8 crc /* either CRC8_INIT_VALUE or previous return value */
> +)
> +{
> + while (nbytes-- > 0)
> + CRC_INNER_LOOP(8, crc, *pdata++);
> + return crc;
> +}
> +
> +/*********************************************************
> **********************
> + * crc16
> + *
> + * Computes a crc16 over the input data using the polynomial:
> + *
> + * x^16 + x^12 +x^5 + 1
> + *
> + * The caller provides the initial value (either CRC16_INIT_VALUE
> + * or the previous returned value) to allow for processing of
> + * discontiguous blocks of data. When generating the CRC the
> + * caller is responsible for complementing the final return value
> + * and inserting it into the byte stream. When checking, a final
> + * return value of CRC16_GOOD_VALUE indicates a valid CRC.
> + *
> + * Reference: Dallas Semiconductor Application Note 27
> + * Williams, Ross N., "A Painless Guide to CRC Error Detection Algorithms",
> + * ver 3, Aug 1993, ross at guest.adelaide.edu.au, Rocksoft Pty Ltd.,
> + * ftp://ftp.rocksoft.com/clients/rocksoft/papers/crc_v3.txt
> + *
> +
> **********************************************************
> ********************/
> +
> +static uint16 crc16_table[256] = {
> + 0x0000, 0x1189, 0x2312, 0x329B, 0x4624, 0x57AD, 0x6536, 0x74BF,
> + 0x8C48, 0x9DC1, 0xAF5A, 0xBED3, 0xCA6C, 0xDBE5, 0xE97E, 0xF8F7,
> + 0x1081, 0x0108, 0x3393, 0x221A, 0x56A5, 0x472C, 0x75B7, 0x643E,
> + 0x9CC9, 0x8D40, 0xBFDB, 0xAE52, 0xDAED, 0xCB64, 0xF9FF, 0xE876,
> + 0x2102, 0x308B, 0x0210, 0x1399, 0x6726, 0x76AF, 0x4434, 0x55BD,
> + 0xAD4A, 0xBCC3, 0x8E58, 0x9FD1, 0xEB6E, 0xFAE7, 0xC87C, 0xD9F5,
> + 0x3183, 0x200A, 0x1291, 0x0318, 0x77A7, 0x662E, 0x54B5, 0x453C,
> + 0xBDCB, 0xAC42, 0x9ED9, 0x8F50, 0xFBEF, 0xEA66, 0xD8FD, 0xC974,
> + 0x4204, 0x538D, 0x6116, 0x709F, 0x0420, 0x15A9, 0x2732, 0x36BB,
> + 0xCE4C, 0xDFC5, 0xED5E, 0xFCD7, 0x8868, 0x99E1, 0xAB7A, 0xBAF3,
> + 0x5285, 0x430C, 0x7197, 0x601E, 0x14A1, 0x0528, 0x37B3, 0x263A,
> + 0xDECD, 0xCF44, 0xFDDF, 0xEC56, 0x98E9, 0x8960, 0xBBFB, 0xAA72,
> + 0x6306, 0x728F, 0x4014, 0x519D, 0x2522, 0x34AB, 0x0630, 0x17B9,
> + 0xEF4E, 0xFEC7, 0xCC5C, 0xDDD5, 0xA96A, 0xB8E3, 0x8A78, 0x9BF1,
> + 0x7387, 0x620E, 0x5095, 0x411C, 0x35A3, 0x242A, 0x16B1, 0x0738,
> + 0xFFCF, 0xEE46, 0xDCDD, 0xCD54, 0xB9EB, 0xA862, 0x9AF9, 0x8B70,
> + 0x8408, 0x9581, 0xA71A, 0xB693, 0xC22C, 0xD3A5, 0xE13E, 0xF0B7,
> + 0x0840, 0x19C9, 0x2B52, 0x3ADB, 0x4E64, 0x5FED, 0x6D76, 0x7CFF,
> + 0x9489, 0x8500, 0xB79B, 0xA612, 0xD2AD, 0xC324, 0xF1BF, 0xE036,
> + 0x18C1, 0x0948, 0x3BD3, 0x2A5A, 0x5EE5, 0x4F6C, 0x7DF7, 0x6C7E,
> + 0xA50A, 0xB483, 0x8618, 0x9791, 0xE32E, 0xF2A7, 0xC03C, 0xD1B5,
> + 0x2942, 0x38CB, 0x0A50, 0x1BD9, 0x6F66, 0x7EEF, 0x4C74, 0x5DFD,
> + 0xB58B, 0xA402, 0x9699, 0x8710, 0xF3AF, 0xE226, 0xD0BD, 0xC134,
> + 0x39C3, 0x284A, 0x1AD1, 0x0B58, 0x7FE7, 0x6E6E, 0x5CF5, 0x4D7C,
> + 0xC60C, 0xD785, 0xE51E, 0xF497, 0x8028, 0x91A1, 0xA33A, 0xB2B3,
> + 0x4A44, 0x5BCD, 0x6956, 0x78DF, 0x0C60, 0x1DE9, 0x2F72, 0x3EFB,
> + 0xD68D, 0xC704, 0xF59F, 0xE416, 0x90A9, 0x8120, 0xB3BB, 0xA232,
> + 0x5AC5, 0x4B4C, 0x79D7, 0x685E, 0x1CE1, 0x0D68, 0x3FF3, 0x2E7A,
> + 0xE70E, 0xF687, 0xC41C, 0xD595, 0xA12A, 0xB0A3, 0x8238, 0x93B1,
> + 0x6B46, 0x7ACF, 0x4854, 0x59DD, 0x2D62, 0x3CEB, 0x0E70, 0x1FF9,
> + 0xF78F, 0xE606, 0xD49D, 0xC514, 0xB1AB, 0xA022, 0x92B9, 0x8330,
> + 0x7BC7, 0x6A4E, 0x58D5, 0x495C, 0x3DE3, 0x2C6A, 0x1EF1, 0x0F78
> +};
> +
> +uint16
> +crc16(
> + uint8 *pdata, /* pointer to array of data to process */
> + uint nbytes, /* number of input data bytes to process */
> + uint16 crc /* either CRC16_INIT_VALUE or previous return value */
> +)
> +{
> + while (nbytes-- > 0)
> + CRC_INNER_LOOP(16, crc, *pdata++);
> + return crc;
> +}
> +
> +/*********************************************************
> **********************
> + * crc32
> + *
> + * Computes a crc32 over the input data using the polynomial:
> + *
> + *
> x^32+x^26+x^23+x^22+x^16+x^12+x^11+X^10+x^8+x^7+x^5+x^4+x^2+x+1
> + *
> + * The caller provides the initial value (either CRC32_INIT_VALUE
> + * or the previous returned value) to allow for processing of
> + * discontiguous blocks of data. When generating the CRC the
> + * caller is responsible for complementing the final return value
> + * and inserting it into the byte stream. When checking, a final
> + * return value of CRC32_GOOD_VALUE indicates a valid CRC.
> + *
> + * Reference: Dallas Semiconductor Application Note 27
> + * Williams, Ross N., "A Painless Guide to CRC Error Detection Algorithms",
> + * ver 3, Aug 1993, ross at guest.adelaide.edu.au, Rocksoft Pty Ltd.,
> + * ftp://ftp.rocksoft.com/clients/rocksoft/papers/crc_v3.txt
> + *
> +
> **********************************************************
> ********************/
> +
> +static uint32 crc32_table[256] = {
> + 0x00000000, 0x77073096, 0xEE0E612C, 0x990951BA,
> + 0x076DC419, 0x706AF48F, 0xE963A535, 0x9E6495A3,
> + 0x0EDB8832, 0x79DCB8A4, 0xE0D5E91E, 0x97D2D988,
> + 0x09B64C2B, 0x7EB17CBD, 0xE7B82D07, 0x90BF1D91,
> + 0x1DB71064, 0x6AB020F2, 0xF3B97148, 0x84BE41DE,
> + 0x1ADAD47D, 0x6DDDE4EB, 0xF4D4B551, 0x83D385C7,
> + 0x136C9856, 0x646BA8C0, 0xFD62F97A, 0x8A65C9EC,
> + 0x14015C4F, 0x63066CD9, 0xFA0F3D63, 0x8D080DF5,
> + 0x3B6E20C8, 0x4C69105E, 0xD56041E4, 0xA2677172,
> + 0x3C03E4D1, 0x4B04D447, 0xD20D85FD, 0xA50AB56B,
> + 0x35B5A8FA, 0x42B2986C, 0xDBBBC9D6, 0xACBCF940,
> + 0x32D86CE3, 0x45DF5C75, 0xDCD60DCF, 0xABD13D59,
> + 0x26D930AC, 0x51DE003A, 0xC8D75180, 0xBFD06116,
> + 0x21B4F4B5, 0x56B3C423, 0xCFBA9599, 0xB8BDA50F,
> + 0x2802B89E, 0x5F058808, 0xC60CD9B2, 0xB10BE924,
> + 0x2F6F7C87, 0x58684C11, 0xC1611DAB, 0xB6662D3D,
> + 0x76DC4190, 0x01DB7106, 0x98D220BC, 0xEFD5102A,
> + 0x71B18589, 0x06B6B51F, 0x9FBFE4A5, 0xE8B8D433,
> + 0x7807C9A2, 0x0F00F934, 0x9609A88E, 0xE10E9818,
> + 0x7F6A0DBB, 0x086D3D2D, 0x91646C97, 0xE6635C01,
> + 0x6B6B51F4, 0x1C6C6162, 0x856530D8, 0xF262004E,
> + 0x6C0695ED, 0x1B01A57B, 0x8208F4C1, 0xF50FC457,
> + 0x65B0D9C6, 0x12B7E950, 0x8BBEB8EA, 0xFCB9887C,
> + 0x62DD1DDF, 0x15DA2D49, 0x8CD37CF3, 0xFBD44C65,
> + 0x4DB26158, 0x3AB551CE, 0xA3BC0074, 0xD4BB30E2,
> + 0x4ADFA541, 0x3DD895D7, 0xA4D1C46D, 0xD3D6F4FB,
> + 0x4369E96A, 0x346ED9FC, 0xAD678846, 0xDA60B8D0,
> + 0x44042D73, 0x33031DE5, 0xAA0A4C5F, 0xDD0D7CC9,
> + 0x5005713C, 0x270241AA, 0xBE0B1010, 0xC90C2086,
> + 0x5768B525, 0x206F85B3, 0xB966D409, 0xCE61E49F,
> + 0x5EDEF90E, 0x29D9C998, 0xB0D09822, 0xC7D7A8B4,
> + 0x59B33D17, 0x2EB40D81, 0xB7BD5C3B, 0xC0BA6CAD,
> + 0xEDB88320, 0x9ABFB3B6, 0x03B6E20C, 0x74B1D29A,
> + 0xEAD54739, 0x9DD277AF, 0x04DB2615, 0x73DC1683,
> + 0xE3630B12, 0x94643B84, 0x0D6D6A3E, 0x7A6A5AA8,
> + 0xE40ECF0B, 0x9309FF9D, 0x0A00AE27, 0x7D079EB1,
> + 0xF00F9344, 0x8708A3D2, 0x1E01F268, 0x6906C2FE,
> + 0xF762575D, 0x806567CB, 0x196C3671, 0x6E6B06E7,
> + 0xFED41B76, 0x89D32BE0, 0x10DA7A5A, 0x67DD4ACC,
> + 0xF9B9DF6F, 0x8EBEEFF9, 0x17B7BE43, 0x60B08ED5,
> + 0xD6D6A3E8, 0xA1D1937E, 0x38D8C2C4, 0x4FDFF252,
> + 0xD1BB67F1, 0xA6BC5767, 0x3FB506DD, 0x48B2364B,
> + 0xD80D2BDA, 0xAF0A1B4C, 0x36034AF6, 0x41047A60,
> + 0xDF60EFC3, 0xA867DF55, 0x316E8EEF, 0x4669BE79,
> + 0xCB61B38C, 0xBC66831A, 0x256FD2A0, 0x5268E236,
> + 0xCC0C7795, 0xBB0B4703, 0x220216B9, 0x5505262F,
> + 0xC5BA3BBE, 0xB2BD0B28, 0x2BB45A92, 0x5CB36A04,
> + 0xC2D7FFA7, 0xB5D0CF31, 0x2CD99E8B, 0x5BDEAE1D,
> + 0x9B64C2B0, 0xEC63F226, 0x756AA39C, 0x026D930A,
> + 0x9C0906A9, 0xEB0E363F, 0x72076785, 0x05005713,
> + 0x95BF4A82, 0xE2B87A14, 0x7BB12BAE, 0x0CB61B38,
> + 0x92D28E9B, 0xE5D5BE0D, 0x7CDCEFB7, 0x0BDBDF21,
> + 0x86D3D2D4, 0xF1D4E242, 0x68DDB3F8, 0x1FDA836E,
> + 0x81BE16CD, 0xF6B9265B, 0x6FB077E1, 0x18B74777,
> + 0x88085AE6, 0xFF0F6A70, 0x66063BCA, 0x11010B5C,
> + 0x8F659EFF, 0xF862AE69, 0x616BFFD3, 0x166CCF45,
> + 0xA00AE278, 0xD70DD2EE, 0x4E048354, 0x3903B3C2,
> + 0xA7672661, 0xD06016F7, 0x4969474D, 0x3E6E77DB,
> + 0xAED16A4A, 0xD9D65ADC, 0x40DF0B66, 0x37D83BF0,
> + 0xA9BCAE53, 0xDEBB9EC5, 0x47B2CF7F, 0x30B5FFE9,
> + 0xBDBDF21C, 0xCABAC28A, 0x53B39330, 0x24B4A3A6,
> + 0xBAD03605, 0xCDD70693, 0x54DE5729, 0x23D967BF,
> + 0xB3667A2E, 0xC4614AB8, 0x5D681B02, 0x2A6F2B94,
> + 0xB40BBE37, 0xC30C8EA1, 0x5A05DF1B, 0x2D02EF8D
> +};
> +
> +uint32
> +crc32(
> + uint8 *pdata, /* pointer to array of data to process */
> + uint nbytes, /* number of input data bytes to process */
> + uint32 crc /* either CRC32_INIT_VALUE or previous return value */
> +)
> +{
> + while (nbytes-- > 0)
> + CRC_INNER_LOOP(32, crc, *pdata++);
> + return crc;
> +}
> diff --git a/tools/firmware-utils/src/linksys/e8350/crc.h b/tools/firmware-
> utils/src/linksys/e8350/crc.h
> new file mode 100644
> index 0000000000..c7e783c159
> --- /dev/null
> +++ b/tools/firmware-utils/src/linksys/e8350/crc.h
> @@ -0,0 +1,69 @@
> +/*********************************************************
> **********************
> + * $Id: crc.h,v 1.2 2010/12/22 05:14:42 gavin.ke Exp $
> + * Copyright (C) 2009, Broadcom Corporation
> + * All Rights Reserved.
> + *
> + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO
> WARRANTIES OF ANY
> + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR
> OTHERWISE. BROADCOM
> + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF
> MERCHANTABILITY, FITNESS
> + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS
> SOFTWARE.
> + * crc.h - a function to compute crc for iLine10 headers
> +
> **********************************************************
> ********************/
> +
> +#ifndef _RTS_CRC_H_
> +#define _RTS_CRC_H_ 1
> +
> +#include "typedefs.h"
> +
> +#ifdef __cplusplus
> +extern "C" {
> +#endif
> +
> +
> +#define CRC8_INIT_VALUE 0xff /* Initial CRC8 checksum value */
> +#define CRC8_GOOD_VALUE 0x9f /* Good final CRC8 checksum value */
> +#define HCS_GOOD_VALUE 0x39 /* Good final header checksum value
> */
> +
> +#define CRC16_INIT_VALUE 0xffff /* Initial CRC16 checksum value */
> +#define CRC16_GOOD_VALUE 0xf0b8 /* Good final CRC16 checksum
> value */
> +
> +#define CRC32_INIT_VALUE 0xffffffff /* Initial CRC32 checksum value */
> +#define CRC32_GOOD_VALUE 0xdebb20e3 /* Good final CRC32 checksum
> value */
> +
> +void hcs(uint8 *, uint);
> +uint8 crc8(uint8 *, uint, uint8);
> +uint16 crc16(uint8 *, uint, uint16);
> +uint32 crc32(uint8 *, uint, uint32);
> +
> +/* macros for common usage */
> +
> +#define APPEND_CRC8(pbytes, nbytes) \
> +do { \
> + uint8 tmp = crc8(pbytes, nbytes, CRC8_INIT_VALUE) ^ 0xff; \
> + (pbytes)[(nbytes)] = tmp; \
> + (nbytes) += 1; \
> +} while (0)
> +
> +#define APPEND_CRC16(pbytes, nbytes) \
> +do { \
> + uint16 tmp = crc16(pbytes, nbytes, CRC16_INIT_VALUE) ^ 0xffff; \
> + (pbytes)[(nbytes) + 0] = (tmp >> 0) & 0xff; \
> + (pbytes)[(nbytes) + 1] = (tmp >> 8) & 0xff; \
> + (nbytes) += 2; \
> +} while (0)
> +
> +#define APPEND_CRC32(pbytes, nbytes) \
> +do { \
> + uint32 tmp = crc32(pbytes, nbytes, CRC32_INIT_VALUE) ^ 0xffffffff; \
> + (pbytes)[(nbytes) + 0] = (tmp >> 0) & 0xff; \
> + (pbytes)[(nbytes) + 1] = (tmp >> 8) & 0xff; \
> + (pbytes)[(nbytes) + 2] = (tmp >> 16) & 0xff; \
> + (pbytes)[(nbytes) + 3] = (tmp >> 24) & 0xff; \
> + (nbytes) += 4; \
> +} while (0)
> +
> +#ifdef __cplusplus
> +}
> +#endif
> +
> +#endif /* _RTS_CRC_H_ */
> diff --git a/tools/firmware-utils/src/linksys/e8350/cyutils.h b/tools/firmware-
> utils/src/linksys/e8350/cyutils.h
> new file mode 100644
> index 0000000000..fd77ab52f3
> --- /dev/null
> +++ b/tools/firmware-utils/src/linksys/e8350/cyutils.h
> @@ -0,0 +1,348 @@
> +#include "code_pattern.h"
> +
> +#if LINKSYS_MODEL == WRT54GSV4
> + #if LOCALE == USA
> + #define CYBERTAN_VERSION "v1.05.6"
> + #define SERIAL_NUMBER "000"
> + #define MINOR_VERSION ""
> + #else // ETSI
> + #define CYBERTAN_VERSION "v1.05.8"
> + #define SERIAL_NUMBER "000"
> + #define MINOR_VERSION ""
> + #endif
> +#elif LINKSYS_MODEL == WRT54GS // WRT54GSV1-3
> + #if LOCALE == USA
> + #define CYBERTAN_VERSION "v4.70.8"
> + #define SERIAL_NUMBER "000"
> + #define MINOR_VERSION ""
> + #else // ETSI
> + #define CYBERTAN_VERSION "v4.71.0"
> + #define SERIAL_NUMBER "000"
> + #define MINOR_VERSION ""
> + #endif
> +#elif LINKSYS_MODEL == WRT54GL
> + #if LOCALE == USA
> + #define CYBERTAN_VERSION "v4.30.2"
> + #define SERIAL_NUMBER "000"
> + #define MINOR_VERSION ""
> + #else // ETSI
> + #define CYBERTAN_VERSION "v4.30.4"
> + #define SERIAL_NUMBER "000"
> + #define MINOR_VERSION ""
> + #endif
> +#elif LINKSYS_MODEL == WRT54G // WRT54GV1-4
> + #if LOCALE == USA
> + #define CYBERTAN_VERSION "v4.20.9"
> + #define SERIAL_NUMBER "001"
> + #define MINOR_VERSION ""
> + #else // ETSI
> + #define CYBERTAN_VERSION "v4.21.0"
> + #define SERIAL_NUMBER "000"
> + #define MINOR_VERSION ""
> + #endif
> +#elif LINKSYS_MODEL == T_MOBILE
> + #define CYBERTAN_VERSION "v5.00.0"
> + #define SERIAL_NUMBER "002"
> + #define MINOR_VERSION ""
> +#elif LINKSYS_MODEL == WRT54G3G
> + #define CYBERTAN_VERSION "v1.90.0"
> + #define SERIAL_NUMBER "000"
> + #define MINOR_VERSION ""
> +#elif LINKSYS_MODEL == WRT300N
> + #if LOCALE == USA
> + #define CYBERTAN_VERSION "v0.92.1"
> + #define SERIAL_NUMBER "000"
> + #define MINOR_VERSION ""
> + #else // ETSI
> + #define CYBERTAN_VERSION "v0.92.1"
> + #define SERIAL_NUMBER "000"
> + #define MINOR_VERSION ""
> + #endif
> +#elif LINKSYS_MODEL == WRT350N
> + #if LOCALE == USA
> + #define CYBERTAN_VERSION "v1.03.9"
> + #define SERIAL_NUMBER "000"
> + #define MINOR_VERSION "-beta3"
> + #else // ETSI
> + #define CYBERTAN_VERSION "v1.03.9"
> + #define SERIAL_NUMBER "000"
> + #define MINOR_VERSION "-beta3"
> + #endif
> +#elif LINKSYS_MODEL == WRT610N
> + #if LOCALE == USA
> + #define CYBERTAN_VERSION "v2.00.00"
> + #define SERIAL_NUMBER "02 betasvn0526"
> + #define MINOR_VERSION ""
> +//add by michael at 200804014
> + #define BUILD_KEYWORD " B"
> + #define BUILD_NUMBER SERIAL_NUMBER
> + #define BETA_VERSION " "
> +//end by michael
> + #else // ETSI
> + #define CYBERTAN_VERSION "v0.00.01"
> + #define SERIAL_NUMBER "09"
> + #define MINOR_VERSION ""
> +//add by michael at 20080414
> + #define BUILD_KEYWORD " B"
> + #define BUILD_NUMBER SERIAL_NUMBER
> + #define BETA_VERSION " "
> + #endif
> +//end by michael
> +#elif LINKSYS_MODEL == E200
> + #if LOCALE == USA
> + #define CYBERTAN_VERSION "v0.0.01"
> + #define SERIAL_NUMBER "001"
> + #define MINOR_VERSION ""
> + #define BUILD_KEYWORD " B"
> + #define BUILD_NUMBER SERIAL_NUMBER
> + #define BETA_VERSION " "
> + #else // ETSI
> + #define CYBERTAN_VERSION "v0.00.01"
> + #define SERIAL_NUMBER "001"
> + #define MINOR_VERSION ""
> + #define BUILD_KEYWORD " B"
> + #define BUILD_NUMBER SERIAL_NUMBER
> + #define BETA_VERSION " "
> + #endif
> +#elif LINKSYS_MODEL == E300
> + #if LOCALE == USA
> + #define CYBERTAN_VERSION "v3.0.00"
> + #define SERIAL_NUMBER "006"
> + #define MINOR_VERSION ""
> + #define BUILD_KEYWORD " B"
> + #define BUILD_NUMBER SERIAL_NUMBER
> + #define BETA_VERSION " "
> + #else // ETSI
> + #define CYBERTAN_VERSION "v0.00.01"
> + #define SERIAL_NUMBER "09"
> + #define MINOR_VERSION ""
> + #define BUILD_KEYWORD " B"
> + #define BUILD_NUMBER SERIAL_NUMBER
> + #define BETA_VERSION " "
> + #endif
> +#elif LINKSYS_MODEL == E3200
> + #if LOCALE == USA
> + #define CYBERTAN_VERSION "v1.0.00"
> + #define SERIAL_NUMBER "1"
> + #define MINOR_VERSION ""
> + #define BUILD_KEYWORD " B"
> + #define BUILD_NUMBER SERIAL_NUMBER
> + #define BETA_VERSION " "
> + #else // ETSI
> + #define CYBERTAN_VERSION "v0.00.01"
> + #define SERIAL_NUMBER "01"
> + #define MINOR_VERSION ""
> + #define BUILD_KEYWORD " B"
> + #define BUILD_NUMBER SERIAL_NUMBER
> + #define BETA_VERSION " "
> + #endif
> +#elif LINKSYS_MODEL == E4200
> + #if LOCALE == USA
> + #define CYBERTAN_VERSION "v1.0.00"
> + #define SERIAL_NUMBER "9"
> + #define MINOR_VERSION ""
> + #define BUILD_KEYWORD " B"
> + #define BUILD_NUMBER SERIAL_NUMBER
> + #define BETA_VERSION " "
> + #else // ETSI
> + #define CYBERTAN_VERSION "v0.00.01"
> + #define SERIAL_NUMBER "09"
> + #define MINOR_VERSION ""
> + #define BUILD_KEYWORD " B"
> + #define BUILD_NUMBER SERIAL_NUMBER
> + #define BETA_VERSION " "
> + #endif
> +#elif LINKSYS_MODEL == E2500
> + #if LOCALE == USA
> + #define CYBERTAN_VERSION "v3.0.00"
> + #define SERIAL_NUMBER "6"
> + #define MINOR_VERSION ""
> + #define BUILD_KEYWORD " B"
> + #define BUILD_NUMBER SERIAL_NUMBER
> + #define BETA_VERSION " "
> + #else // ETSI
> + #define CYBERTAN_VERSION "v1.0.00"
> + #define SERIAL_NUMBER "01"
> + #define MINOR_VERSION ""
> + #define BUILD_KEYWORD " B"
> + #define BUILD_NUMBER SERIAL_NUMBER
> + #define BETA_VERSION " "
> + #endif
> +#elif LINKSYS_MODEL == AC2350
> + #if LOCALE == USA
> + #define CYBERTAN_VERSION "v1.0.03"
> + #define SERIAL_NUMBER "003"
> + #define MINOR_VERSION ""
> + #define BUILD_KEYWORD " B"
> + #define BUILD_NUMBER SERIAL_NUMBER
> + #define BETA_VERSION " "
> + #define CYBERTAN_UBOOT_VERSION "v1.0"
> + #else // ETSI
> + #define CYBERTAN_VERSION "v1.0.00"
> + #define SERIAL_NUMBER "01"
> + #define MINOR_VERSION ""
> + #define BUILD_KEYWORD " B"
> + #define BUILD_NUMBER SERIAL_NUMBER
> + #define BETA_VERSION " "
> + #define CYBERTAN_UBOOT_VERSION "v1.0"
> + #endif
> +
> +#endif
> +
> +#if LINKSYS_MODEL == T_MOBILE
> + #define CFES_BOOT_VERSION "v5.3"
> +#elif LINKSYS_MODEL == E2500
> + //#define CFES_BOOT_VERSION "v4.13"
> + //#define CFES_BOOT_VERSION "v5.00"
> + #define CFES_BOOT_VERSION "v6.07"
> +#else
> + #define CFES_BOOT_VERSION "v5.2"
> +#endif
> +
> +#define LANG_VERSION "v1.00.00" //for lang.bin version
> control(setupwizard)
> +#define PMON_BOOT_VERSION "v1.8"
> +#define QCA_WL_VERSION "v10.2.138.3" /*add for QCA wireless
> version by Jemmy 2014.5.21*/
> +
> +
> +#if LINKSYS_MODEL == T_MOBILE
> +#define BOOT_IPADDR "192.168.0.1"
> +#define BOOT_NETMASK "255.255.255.0"
> +#else
> +#define BOOT_IPADDR "192.168.1.1"
> +#define BOOT_NETMASK "255.255.255.0"
> +#endif
> +
> +#define SUPPORT_4712_CHIP 0x0001
> +#define SUPPORT_INTEL_FLASH 0x0002
> +#define SUPPORT_5325E_SWITCH 0x0004
> +#define SUPPORT_4704_CHIP 0x0008
> +#define SUPPORT_5352E_CHIP 0x0010
> +
> +struct code_header {
> + char magic[4]; // Code Pattern
> + char res1[4]; // for extra magic
> + char fwdate[3]; // Firmware build date
> + char fwvern[3]; // Firmware version
> + char id[4]; // U2ND
> + char hw_ver; // 0) for 4702, 1) for 4712, 2) for 4712L, 3) for 4704, 4)
> for 5352E
> + unsigned char sn; // Serial Number
> + unsigned short flags;
> + unsigned char stable[2]; // The image is stable (for dual image)
> + unsigned char try1[2]; // Try to boot image first time (for dual
> image)
> + unsigned char try2[2]; // Try to boot image second time (for
> dual image)
> + unsigned char try3[2]; // Try to boot image third time (for
> dual_image)
> + unsigned char res3[2];
> +} ;
> +
> +//add for AC2350 F/W header
> +#define FWHDR_MAGIC_STR "CHDR"
> +#define FWHDR_MAGIC 0X52444843
> +struct cbt_fw_header
> +{
> + unsigned int magic; /* "CHDR" */
> + unsigned int len; /* Length of file including header */
> + unsigned int crc32; /* 32-bit CRC */
> + unsigned int res;
> +};
> +
> +//#ifdef MULTILANG_SUPPORT
> +struct lang_header {
> + char magic[4];
> + char res1[4]; // for extra magic
> + char fwdate[3];
> + char fwvern[3];
> + char id[4]; // U2ND
> + char hw_ver; // 0: for 4702, 1: for 4712
> + char res2;
> + unsigned long len;
> + unsigned char res3[8];
> +} ;
> +//#endif
> +
> +struct boot_header {
> + char magic[3];
> + char res[29];
> +};
> +
> +/***************************************
> + * define upnp misc *
> + ***************************************/
> +#if OEM == LINKSYS
> + #if LANGUAGE == ENGLISH
> + #define URL "http://www.linksys.com/"
> + #else
> + #define URL "http://www.linksys.co.jp/"
> + #endif
> + #define DEV_FRIENDLY_NAME "Linksys"MODEL_NAME
> + #define DEV_MFR "Linksys"
> + //#define DEV_MFR_URL URL
> + #define DEV_MFR_URL "http://www.linksys.com"
> + #define DEV_MODEL_DESCRIPTION "Internet Access Server"
> + #define DEV_MODEL MODEL_NAME
> + #define DEV_MODEL_NO CYBERTAN_VERSION
> + //#define DEV_MODEL_URL URL
> + #define DEV_MODEL_URL
> "http://www.linksys.com/international"
> +#elif OEM == PCI
> + #if LANGUAGE == ENGLISH
> + #define URL "http://www.planex.com/"
> + #else
> + #define URL "http://www.planex.co.jp/"
> + #endif
> + #define DEV_FRIENDLY_NAME "BLW-04G Wireless Broadband
> Router"
> + #define DEV_MFR "Planex Communciations Inc."
> + #define DEV_MFR_URL URL
> + #define DEV_MODEL_DESCRIPTION "Internet Gateway Device with UPnP
> support"
> + #define DEV_MODEL "BLW-04G"
> + #define DEV_MODEL_NO CYBERTAN_VERSION
> + #define DEV_MODEL_URL URL
> +#else
> + #define URL ""
> + #define DEV_FRIENDLY_NAME MODEL_NAME
> + #define DEV_MFR ""
> + #define DEV_MFR_URL URL
> + #define DEV_MODEL_DESCRIPTION "Internet Access Server"
> + #define DEV_MODEL MODEL_NAME
> + #define DEV_MODEL_NO CYBERTAN_VERSION
> + #define DEV_MODEL_URL URL
> +#endif
> +
> +/***************************************
> + * define Parental Control link *
> + ***************************************/
> +#if LOCALE == EUROPE
> + #define SIGN_UP_URL
> "http://pcsvc.ourlinksys.com/eu/language.jsp"
> + #define MORE_INFO_URL
> "http://www.linksys.com/pcsvc/eu/info_eu.asp"
> + #define ADMIN_URL "http://pcsvc.ourlinksys.com/en"
> +#elif LOCALE == GERMANY
> + #define SIGN_UP_URL "http://pcsvc.ourlinksys.com/de/trial.asp"
> + #define MORE_INFO_URL
> "http://www.linksys.com/pcsvc/de/info_de.asp"
> + #define ADMIN_URL "http://pcsvc.ourlinksys.com/de/admin.asp"
> +#elif LOCALE == FRANCE
> + #define SIGN_UP_URL "http://pcsvc.ourlinksys.com/fr/trial.asp"
> + #define MORE_INFO_URL
> "http://www.linksys.com/pcsvc/fr/info_fr.asp"
> + #define ADMIN_URL "http://pcsvc.ourlinksys.com/fr/admin.asp"
> +#else
> + #define SIGN_UP_URL "http://pcsvc.ourlinksys.com/us/trial.asp"
> + #define MORE_INFO_URL
> "http://www.linksys.com/pcsvc/info.asp"
> + #define ADMIN_URL "http://pcsvc.ourlinksys.com/us/admin.asp"
> +#endif
> +
> +/***************************************
> + * define PPTP info *
> + ***************************************/
> +#if OEM == LINKSYS
> +#define PPTP_VENDOR "Linksys"
> +#else
> +#define PPTP_VENDOR CT_VENDOR
> +#endif
> +#define PPTP_HOSTNAME ""
> +
> +/***************************************
> + * define L2TP info *
> + ***************************************/
> +#if OEM == LINKSYS
> +#define L2TP_VENDOR "Linksys"
> +#else
> +#define L2TP_VENDOR CT_VENDOR
> +#endif
> +#define L2TP_HOSTNAME MODEL_NAME //2005-03-04 by kanki
> diff --git a/tools/firmware-utils/src/linksys/e8350/typedefs.h
> b/tools/firmware-utils/src/linksys/e8350/typedefs.h
> new file mode 100644
> index 0000000000..78989745f9
> --- /dev/null
> +++ b/tools/firmware-utils/src/linksys/e8350/typedefs.h
> @@ -0,0 +1,447 @@
> +/*
> + * Copyright (C) 2009, Broadcom Corporation
> + * All Rights Reserved.
> + *
> + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO
> WARRANTIES OF ANY
> + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR
> OTHERWISE. BROADCOM
> + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF
> MERCHANTABILITY, FITNESS
> + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS
> SOFTWARE.
> + * $Id: typedefs.h,v 1.1.1.1 2010/11/24 06:37:38 gavin.ke Exp $
> + */
> +
> +#ifndef _TYPEDEFS_H_
> +#define _TYPEDEFS_H_
> +
> +#ifdef SITE_TYPEDEFS
> +
> +/*
> + * Define SITE_TYPEDEFS in the compile to include a site-specific
> + * typedef file "site_typedefs.h".
> + *
> + * If SITE_TYPEDEFS is not defined, then the code section below makes
> + * inferences about the compile environment based on defined symbols
> and
> + * possibly compiler pragmas.
> + *
> + * Following these two sections is the Default Typedefs section.
> + * This section is only processed if USE_TYPEDEF_DEFAULTS is
> + * defined. This section has a default set of typedefs and a few
> + * preprocessor symbols (TRUE, FALSE, NULL, ...).
> + */
> +
> +#include "site_typedefs.h"
> +
> +#else
> +
> +/*
> + * Infer the compile environment based on preprocessor symbols and
> pragmas.
> + * Override type definitions as needed, and include configuration-
> dependent
> + * header files to define types.
> + */
> +
> +#ifdef __cplusplus
> +
> +#define TYPEDEF_BOOL
> +#ifndef FALSE
> +#define FALSE false
> +#endif
> +#ifndef TRUE
> +#define TRUE true
> +#endif
> +
> +#else /* ! __cplusplus */
> +
> +#if defined(_WIN32)
> +
> +#define TYPEDEF_BOOL
> +typedef unsigned char bool; /* consistent w/BOOL
> */
> +
> +#endif /* _WIN32 */
> +
> +#endif /* ! __cplusplus */
> +
> +#if defined(_WIN64) && !defined(EFI)
> +/* use the Windows ULONG_PTR type when compiling for 64 bit */
> +#include <basetsd.h>
> +#define TYPEDEF_UINTPTR
> +typedef ULONG_PTR uintptr;
> +#elif defined(__x86_64__)
> +#define TYPEDEF_UINTPTR
> +typedef unsigned long long int uintptr;
> +#endif
> +
> +#if defined(_HNDRTE_) && !defined(_HNDRTE_SIM_)
> +#define _NEED_SIZE_T_
> +#endif
> +
> +#if defined(_MINOSL_)
> +#define _NEED_SIZE_T_
> +#endif
> +
> +#if defined(EFI) && !defined(_WIN64)
> +#define _NEED_SIZE_T_
> +#endif
> +
> +#if defined(TARGETOS_nucleus)
> +/* for 'size_t' type */
> +#include <stddef.h>
> +
> +/* float_t types conflict with the same typedefs from the standard ANSI-C
> +** math.h header file. Don't re-typedef them here.
> +*/
> +#define TYPEDEF_FLOAT_T
> +#endif /* TARGETOS_nucleus */
> +
> +#if defined(_NEED_SIZE_T_)
> +typedef long unsigned int size_t;
> +#endif
> +
> +#ifdef __DJGPP__
> +typedef long unsigned int size_t;
> +#endif /* __DJGPP__ */
> +
> +#ifdef _MSC_VER /* Microsoft C */
> +#define TYPEDEF_INT64
> +#define TYPEDEF_UINT64
> +typedef signed __int64 int64;
> +typedef unsigned __int64 uint64;
> +#endif
> +
> +#if defined(MACOSX)
> +#ifdef KERNEL
> +#include <libkern/version.h>
> +#if VERSION_MAJOR > 10
> +#define WLP2P
> +#define IO80211P2P
> +#define APSTA
> +#define WLMCHAN
> +#define WL_MULTIQUEUE
> +#define WL_BSSCFG_TX_SUPR
> +#define WIFI_ACT_FRAME
> +#define FAST_ACTFRM_TX
> +#endif
> +#endif /* KERNEL */
> +#define TYPEDEF_BOOL
> +#endif
> +
> +#if defined(__NetBSD__)
> +#define TYPEDEF_ULONG
> +#endif
> +
> +#if defined(__sparc__)
> +#define TYPEDEF_ULONG
> +#endif
> +
> +
> +#ifdef linux
> +/*
> + * If this is either a Linux hybrid build or the per-port code of a hybrid build
> + * then use the Linux header files to get some of the typedefs. Otherwise,
> define
> + * them entirely in this file. We can't always define the types because we
> get
> + * a duplicate typedef error; there is no way to "undefine" a typedef.
> + * We know when it's per-port code because each file defines LINUX_PORT
> at the top.
> + */
> +#if !defined(LINUX_HYBRID) || defined(LINUX_PORT)
> +#define TYPEDEF_UINT
> +#ifndef TARGETENV_android
> +#define TYPEDEF_USHORT
> +#define TYPEDEF_ULONG
> +#endif /* TARGETENV_android */
> +#ifdef __KERNEL__
> +#include <linux/version.h>
> +#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 19))
> +#define TYPEDEF_BOOL
> +#endif /* >= 2.6.19 */
> +#endif /* __KERNEL__ */
> +#endif /* !defined(LINUX_HYBRID) || defined(LINUX_PORT) */
> +#endif /* linux */
> +
> +#if defined(__ECOS)
> +#define TYPEDEF_UCHAR
> +#define TYPEDEF_UINT
> +#define TYPEDEF_USHORT
> +#define TYPEDEF_ULONG
> +#define TYPEDEF_BOOL
> +#endif
> +
> +#if !defined(linux) && !defined(_WIN32) && !defined(_CFE_) &&
> !defined(_MINOSL_) && \
> + !defined(__DJGPP__) && !defined(__ECOS) && !defined(__BOB__)
> && \
> + !defined(TARGETOS_nucleus)
> +#define TYPEDEF_UINT
> +#define TYPEDEF_USHORT
> +#endif
> +
> +
> +/* Do not support the (u)int64 types with strict ansi for GNU C */
> +#if defined(__GNUC__) && defined(__STRICT_ANSI__)
> +#define TYPEDEF_INT64
> +#define TYPEDEF_UINT64
> +#endif
> +
> +/* ICL accepts unsigned 64 bit type only, and complains in ANSI mode
> + * for signed or unsigned
> + */
> +#if defined(__ICL)
> +
> +#define TYPEDEF_INT64
> +
> +#if defined(__STDC__)
> +#define TYPEDEF_UINT64
> +#endif
> +
> +#endif /* __ICL */
> +
> +#if !defined(_WIN32) && !defined(_CFE_) && !defined(_MINOSL_) &&
> !defined(__DJGPP__) && \
> + !defined(__BOB__) && !defined(TARGETOS_nucleus)
> +
> +/* pick up ushort & uint from standard types.h */
> +#if defined(linux) && defined(__KERNEL__)
> +
> +/* See note above */
> +#if !defined(LINUX_HYBRID) || defined(LINUX_PORT)
> +#ifdef USER_MODE
> +#include <sys/types.h>
> +#else
> +#include <linux/types.h> /* sys/types.h and linux/types.h are oil and
> water */
> +#endif /* USER_MODE */
> +#endif /* !defined(LINUX_HYBRID) || defined(LINUX_PORT) */
> +
> +#else
> +
> +#if defined(__ECOS)
> +#include <pkgconf/infra.h>
> +#include <cyg/infra/cyg_type.h>
> +#include <stdarg.h>
> +#endif
> +
> +#include <sys/types.h>
> +
> +#endif /* linux && __KERNEL__ */
> +
> +#endif /* !_WIN32 && !PMON && !_CFE_ && !_HNDRTE_ && !_MINOSL_
> && !__DJGPP__ */
> +
> +#if defined(MACOSX)
> +
> +#ifdef __BIG_ENDIAN__
> +#define IL_BIGENDIAN
> +#else
> +#ifdef IL_BIGENDIAN
> +#error "IL_BIGENDIAN was defined for a little-endian compile"
> +#endif
> +#endif /* __BIG_ENDIAN__ */
> +
> +#if !defined(__cplusplus)
> +
> +#if defined(__i386__)
> +typedef unsigned char bool;
> +#else
> +typedef unsigned int bool;
> +#endif
> +#define TYPE_BOOL 1
> +enum {
> + false = 0,
> + true = 1
> +};
> +
> +#if defined(KERNEL)
> +#include <IOKit/IOTypes.h>
> +#endif /* KERNEL */
> +
> +#endif /* __cplusplus */
> +
> +#endif /* MACOSX */
> +
> +
> +/* use the default typedefs in the next section of this file */
> +#define USE_TYPEDEF_DEFAULTS
> +
> +#endif /* SITE_TYPEDEFS */
> +
> +
> +/*
> + * Default Typedefs
> + */
> +
> +#ifdef USE_TYPEDEF_DEFAULTS
> +#undef USE_TYPEDEF_DEFAULTS
> +
> +#ifndef TYPEDEF_BOOL
> +typedef /* @abstract@ */ unsigned char bool;
> +#endif
> +
> +/* define uchar, ushort, uint, ulong */
> +
> +#ifndef TYPEDEF_UCHAR
> +typedef unsigned char uchar;
> +#endif
> +
> +#ifndef TYPEDEF_USHORT
> +typedef unsigned short ushort;
> +#endif
> +
> +#ifndef TYPEDEF_UINT
> +typedef unsigned int uint;
> +#endif
> +
> +#ifndef TYPEDEF_ULONG
> +typedef unsigned long ulong;
> +#endif
> +
> +/* define [u]int8/16/32/64, uintptr */
> +
> +#ifndef TYPEDEF_UINT8
> +typedef unsigned char uint8;
> +#endif
> +
> +#ifndef TYPEDEF_UINT16
> +typedef unsigned short uint16;
> +#endif
> +
> +#ifndef TYPEDEF_UINT32
> +typedef unsigned int uint32;
> +#endif
> +
> +#ifndef TYPEDEF_UINT64
> +typedef unsigned long long uint64;
> +#endif
> +
> +#ifndef TYPEDEF_UINTPTR
> +typedef unsigned int uintptr;
> +#endif
> +
> +#ifndef TYPEDEF_INT8
> +typedef signed char int8;
> +#endif
> +
> +#ifndef TYPEDEF_INT16
> +typedef signed short int16;
> +#endif
> +
> +#ifndef _SLHC_H
> +#ifndef TYPEDEF_INT32
> +typedef signed int int32;
> +#endif
> +#endif
> +
> +#ifndef TYPEDEF_INT64
> +typedef signed long long int64;
> +#endif
> +
> +/* define float32/64, float_t */
> +
> +#ifndef TYPEDEF_FLOAT32
> +typedef float float32;
> +#endif
> +
> +#ifndef TYPEDEF_FLOAT64
> +typedef double float64;
> +#endif
> +
> +/*
> + * abstracted floating point type allows for compile time selection of
> + * single or double precision arithmetic. Compiling with -DFLOAT32
> + * selects single precision; the default is double precision.
> + */
> +
> +#ifndef TYPEDEF_FLOAT_T
> +
> +#if defined(FLOAT32)
> +typedef float32 float_t;
> +#else /* default to double precision floating point */
> +typedef float64 float_t;
> +#endif
> +
> +#endif /* TYPEDEF_FLOAT_T */
> +
> +/* define macro values */
> +
> +#ifndef FALSE
> +#define FALSE 0
> +#endif
> +
> +#ifndef TRUE
> +#define TRUE 1 /* TRUE */
> +#endif
> +
> +#ifndef NULL
> +#define NULL 0
> +#endif
> +
> +#ifndef OFF
> +#define OFF 0
> +#endif
> +
> +#ifndef ON
> +#define ON 1 /* ON = 1 */
> +#endif
> +
> +#define AUTO (-1) /* Auto = -1 */
> +
> +/* define PTRSZ, INLINE */
> +
> +#ifndef PTRSZ
> +#define PTRSZ sizeof(char*)
> +#endif
> +
> +
> +/* Detect compiler type. */
> +#ifdef _MSC_VER
> + #define BWL_COMPILER_MICROSOFT
> +#elif defined(__GNUC__)
> + #define BWL_COMPILER_GNU
> +#elif defined(__CC_ARM) && __CC_ARM
> + #define BWL_COMPILER_ARMCC
> +#else
> + #error "Unknown compiler!"
> +#endif /* _MSC_VER */
> +
> +
> +#ifndef INLINE
> + #if defined(BWL_COMPILER_MICROSOFT)
> + #define INLINE __inline
> + #elif defined(BWL_COMPILER_GNU)
> + #define INLINE __inline__
> + #elif defined(BWL_COMPILER_ARMCC)
> + #define INLINE __inline
> + #else
> + #define INLINE
> + #endif /* _MSC_VER */
> +#endif /* INLINE */
> +
> +#undef TYPEDEF_BOOL
> +#undef TYPEDEF_UCHAR
> +#undef TYPEDEF_USHORT
> +#undef TYPEDEF_UINT
> +#undef TYPEDEF_ULONG
> +#undef TYPEDEF_UINT8
> +#undef TYPEDEF_UINT16
> +#undef TYPEDEF_UINT32
> +#undef TYPEDEF_UINT64
> +#undef TYPEDEF_UINTPTR
> +#undef TYPEDEF_INT8
> +#undef TYPEDEF_INT16
> +#undef TYPEDEF_INT32
> +#undef TYPEDEF_INT64
> +#undef TYPEDEF_FLOAT32
> +#undef TYPEDEF_FLOAT64
> +#undef TYPEDEF_FLOAT_T
> +
> +#endif /* USE_TYPEDEF_DEFAULTS */
> +
> +/* Suppress unused parameter warning */
> +#define UNUSED_PARAMETER(x) (void)(x)
> +
> +/*
> + * Including the bcmdefs.h here, to make sure everyone including
> typedefs.h
> + * gets this automatically
> +*/
> +#include "bcmdefs.h"
> +/*
> + * If android target is building then include this file
> + */
> +#ifndef LINUX_HYBRID
> +#ifdef TARGETENV_android
> +#include <bcm_android_types.h>
> +#endif /* TARGETENV_android */
> +#endif /* LINUX_HYBRID */
> +
> +#endif /* _TYPEDEFS_H_ */
> --
> 2.27.0
>
>
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel at lists.openwrt.org
> https://lists.openwrt.org/mailman/listinfo/openwrt-devel
-------------- next part --------------
A non-text attachment was scrubbed...
Name: openpgp-digital-signature.asc
Type: application/pgp-signature
Size: 834 bytes
Desc: not available
URL: <http://lists.openwrt.org/pipermail/openwrt-devel/attachments/20200719/3b570450/attachment-0001.sig>
More information about the openwrt-devel
mailing list