[RFC PATCH 4/5] ipq40xx: add open-drain support to pinctrl-msm
Brian Norris
computersforpeace at gmail.com
Sat Jul 18 16:51:47 EDT 2020
Submitted upstream. Shouldn't affect existing devices, but enables new
device support.
https://lore.kernel.org/linux-gpio/20200703080646.23233-1-computersforpeace@gmail.com/
Currently queued for-next:
https://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl.git/commit/?h=for-next&id=13355ca35cd16f5024655ac06e228b3c199e52a9
Signed-off-by: Brian Norris <computersforpeace at gmail.com>
---
.../090-pinctrl-msm-open-drain.patch | 90 +++++++++++++++++++
1 file changed, 90 insertions(+)
create mode 100644 target/linux/ipq40xx/patches-5.4/090-pinctrl-msm-open-drain.patch
diff --git a/target/linux/ipq40xx/patches-5.4/090-pinctrl-msm-open-drain.patch b/target/linux/ipq40xx/patches-5.4/090-pinctrl-msm-open-drain.patch
new file mode 100644
index 000000000000..9bb05f32844a
--- /dev/null
+++ b/target/linux/ipq40xx/patches-5.4/090-pinctrl-msm-open-drain.patch
@@ -0,0 +1,90 @@
+From 5b08c1d567ee8e6af94696b3e549997cbdb2bb80 Mon Sep 17 00:00:00 2001
+From: Jaiganesh Narayanan <njaigane at codeaurora.org>
+Date: Thu, 1 Sep 2016 10:40:38 +0530
+Subject: [PATCH] pinctrl: qcom: ipq4019: add open drain support
+
+Signed-off-by: Jaiganesh Narayanan <njaigane at codeaurora.org>
+[ Brian: adapted from from the Chromium OS kernel used on IPQ4019-based
+ WiFi APs. ]
+Signed-off-by: Brian Norris <computersforpeace at gmail.com>
+---
+https://lore.kernel.org/linux-gpio/20200703080646.23233-1-computersforpeace@gmail.com/
+
+ drivers/pinctrl/qcom/pinctrl-ipq4019.c | 1 +
+ drivers/pinctrl/qcom/pinctrl-msm.c | 13 +++++++++++++
+ drivers/pinctrl/qcom/pinctrl-msm.h | 2 ++
+ 3 files changed, 16 insertions(+)
+
+diff --git a/drivers/pinctrl/qcom/pinctrl-ipq4019.c b/drivers/pinctrl/qcom/pinctrl-ipq4019.c
+index 8bdb5bd393d2..63915cb210ff 100644
+--- a/drivers/pinctrl/qcom/pinctrl-ipq4019.c
++++ b/drivers/pinctrl/qcom/pinctrl-ipq4019.c
+@@ -254,6 +254,7 @@ DECLARE_QCA_GPIO_PINS(99);
+ .mux_bit = 2, \
+ .pull_bit = 0, \
+ .drv_bit = 6, \
++ .od_bit = 12, \
+ .oe_bit = 9, \
+ .in_bit = 0, \
+ .out_bit = 1, \
+diff --git a/drivers/pinctrl/qcom/pinctrl-msm.c b/drivers/pinctrl/qcom/pinctrl-msm.c
+index 83b7d64bc4c1..dac0404dadf4 100644
+--- a/drivers/pinctrl/qcom/pinctrl-msm.c
++++ b/drivers/pinctrl/qcom/pinctrl-msm.c
+@@ -233,6 +233,10 @@ static int msm_config_reg(struct msm_pinctrl *pctrl,
+ *bit = g->pull_bit;
+ *mask = 3;
+ break;
++ case PIN_CONFIG_DRIVE_OPEN_DRAIN:
++ *bit = g->od_bit;
++ *mask = 1;
++ break;
+ case PIN_CONFIG_DRIVE_STRENGTH:
+ *bit = g->drv_bit;
+ *mask = 7;
+@@ -310,6 +314,12 @@ static int msm_config_group_get(struct pinctrl_dev *pctldev,
+ if (!arg)
+ return -EINVAL;
+ break;
++ case PIN_CONFIG_DRIVE_OPEN_DRAIN:
++ /* Pin is not open-drain */
++ if (!arg)
++ return -EINVAL;
++ arg = 1;
++ break;
+ case PIN_CONFIG_DRIVE_STRENGTH:
+ arg = msm_regval_to_drive(arg);
+ break;
+@@ -382,6 +392,9 @@ static int msm_config_group_set(struct pinctrl_dev *pctldev,
+ else
+ arg = MSM_PULL_UP;
+ break;
++ case PIN_CONFIG_DRIVE_OPEN_DRAIN:
++ arg = 1;
++ break;
+ case PIN_CONFIG_DRIVE_STRENGTH:
+ /* Check for invalid values */
+ if (arg > 16 || arg < 2 || (arg % 2) != 0)
+diff --git a/drivers/pinctrl/qcom/pinctrl-msm.h b/drivers/pinctrl/qcom/pinctrl-msm.h
+index 9452da18a78b..dc7f8c84744b 100644
+--- a/drivers/pinctrl/qcom/pinctrl-msm.h
++++ b/drivers/pinctrl/qcom/pinctrl-msm.h
+@@ -38,6 +38,7 @@ struct msm_function {
+ * @mux_bit: Offset in @ctl_reg for the pinmux function selection.
+ * @pull_bit: Offset in @ctl_reg for the bias configuration.
+ * @drv_bit: Offset in @ctl_reg for the drive strength configuration.
++ * @od_bit: Offset in @ctl_reg for controlling open drain.
+ * @oe_bit: Offset in @ctl_reg for controlling output enable.
+ * @in_bit: Offset in @io_reg for the input bit value.
+ * @out_bit: Offset in @io_reg for the output bit value.
+@@ -75,6 +76,7 @@ struct msm_pingroup {
+ unsigned pull_bit:5;
+ unsigned drv_bit:5;
+
++ unsigned od_bit:5;
+ unsigned oe_bit:5;
+ unsigned in_bit:5;
+ unsigned out_bit:5;
+--
+2.17.1
+
--
2.27.0
More information about the openwrt-devel
mailing list