[OpenWrt-Devel] [PATCH] mac80211: pass hostapd control socket to mesh-mode supplicant

Daniel Hernandez d.hernandez at cititechs.com
Mon Jun 4 09:17:10 EDT 2018


Hello 

Any clue if these fixes are going to make it into Openwrt / LEDE  18.06 . So I can begin testing. 

Thanks,
Danny

-----Original Message-----
From: Sven Eckelmann [mailto:sven.eckelmann at openmesh.com] 
Sent: Friday, April 13, 2018 4:34 AM
To: openwrt-devel at lists.openwrt.org
Cc: Daniel Golle <daniel at makrotopia.org>; lede-dev at lists.infradead.org; Daniel Hernandez <d.hernandez at cititechs.com>
Subject: Re: [OpenWrt-Devel] [PATCH] mac80211: pass hostapd control socket to mesh-mode supplicant

On Freitag, 13. April 2018 01:41:31 CEST Daniel Golle wrote:
> Unlike when operating in Ad-Hoc mode, we apparently need to pass the 
> hostapd control socket interface to wpa_supplicant when using 802.11s 
> mesh mode.
> 
> There also seems to still be something wrong with the logic setting 
> channel and (v)htmode parameters when using AP + mesh...

I haven't tested the current state but this was basically breaking encrypted mesh + AP (AP never came up). Problem was the code (OpenWrt specific) in wpa_supplicant which called STOP_AP via this socket.

Kind regards,
	Sven

_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/listinfo/openwrt-devel



More information about the openwrt-devel mailing list