[OpenWrt-Devel] trunk for the sunxi platform has a few inconsistencies

[TheWerthFam]

I'm running the latest LEDE snapshop on the sunxi platform.  The 4.4 
kernel is a nice upgrade.
While using the image I've noticed a few inconsistencies.
The WAN LED is missing on this platform, could be since this uses a USB 
wifi adapter.  I see from the wiki page the WAN leds seem to be created 
by default on other platofms and not an extra package.
ls -l  /sys/class/leds/
lrwxrwxrwx    1 root     root             0 Jan  1  1970 
lamobo_r1:green:usr -> ../../devices/platform/leds/leds/lamobo_r1:green:usr
lrwxrwxrwx    1 root     root             0 Feb 28 02:03 
rt2800usb-phy0::assoc -> 
../../devices/platform/soc at 01c00000/1c14000.usb/usb1/1-1/1-1:1.0/leds/rt2800usb-phy0::assoc
lrwxrwxrwx    1 root     root             0 Feb 28 02:03 
rt2800usb-phy0::quality -> 
../../devices/platform/soc at 01c00000/1c14000.usb/usb1/1-1/1-1:1.0/leds/rt2800usb-phy0::quality
lrwxrwxrwx    1 root     root             0 Feb 28 02:03 
rt2800usb-phy0::radio -> 
../../devices/platform/soc at 01c00000/1c14000.usb/usb1/1-1/1-1:1.0/leds/rt2800usb-phy0::radio

Secondly I know that procd has had lots more development for this 
release.  I'm finding that the Procd  triggers for config file changes 
don't seem to work consistently.  These triggers worked on CC 15.05.1.  
Are the procd rc.buttons working consistently?
Sample relevant code section.
#!/bin/sh /etc/rc.common
#
START=95
USE_PROCD=1
...
...
My customapp has service_triggers()
Service_triggers()
{
     procd_open_trigger
     procd_add_reload_trigger "mycustomapp"
     procd_close_trigger
}

Changing /etc/config/mycustomapp doesn't trigger a reload or restart of 
the /etc/init.d/mycustomapp
Any advice much appreciated.

     Cheers
         Derek
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel