[OpenWrt-Devel] ATH10K VLAN firmware issue

[Mauro Mozzarelli]

Since the capability is implemented in software you might be testing the 
limit of your router's CPU i/o speed.


On 04/11/16 14:13, Bruno Antunes wrote:
> Hi all,
>
> Old thread but I think the issue is still present.
>
> I'm running a setup with VLANs with WDS and ath10k cards.
>
> To make it work both cards must be loaded in rawmode, AP
> and Sta, and with no security.
>
> I'm using a OpenWrt trunk r49941 and the most recent firmware,
> 10.2.4.70.58, from Kalle ath10k firmware tree.
>
> Although it works the throughput is very bad.
> Are there any alternatives to improve the throughput.
>
> Best Regards,
> Bruno
>
> On 9 December 2015 at 17:24, voncken <cedric.voncken at acksys.fr> wrote:
>>
>>> -----Message d'origine-----
>>> De : Ben Greear [mailto:greearb at candelatech.com]
>>> Envoyé : mercredi 9 décembre 2015 16:34
>>> À : Cedric VONCKEN; ath10k at lists.infradead.org; linux-wireless
>>> Objet : Re: ATH10K VLAN firmware issue
>>>
>>> This only happens when you use STA  + WDS, or is .1q broken for you in
>>> other cases as well?
>> No, this issue occurs in all modes (STA, STA + WDS, AP).
>>
>> Thanks
>>
>> Cedric.
>>
>>> Thanks,
>>> Ben
>>>
>>> On 12/08/2015 06:29 AM, Cedric VONCKEN wrote:
>>>>      I'm testing to transmit frame with 802.1q tag (VLAN).
>>>>
>>>>      My client is set in STA + WDS and the netdev is bridged with eth0.
>>>>      I have a computer with vlan configuration set connected to the STA
>>>> eth0.
>>>>
>>>>      If I try to transmit frames with 802.1q tag, the frames are not
>> sent.
>>>>      I checked with wireless sniffer, and I don't see the frame with VLAN
>>>> tag (the frames without VLAN tag are sent).
>>>>
>>>>      I tested with firmware 10.2.4.70.14-2 from kale github,
>>>> 10.1.467-ct-com-full-015 from candelatech and 10.2.4.70-2 from
>>>> openwrt, and in all cases I have the same issue.
>>>>
>>>>      Thanks for your help.
>>>>
>>>>
>>>> --
>>>> To unsubscribe from this list: send the line "unsubscribe
>>>> linux-wireless" in the body of a message to majordomo at vger.kernel.org
>>>> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>>>>
>>> --
>>> Ben Greear <greearb at candelatech.com>
>>> Candela Technologies Inc  http://www.candelatech.com
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
>> the body of a message to majordomo at vger.kernel.org
>> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel at lists.openwrt.org
> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel