[OpenWrt-Devel] [PATCH] ramips: Add support for Phicomm PSG1208

Chuanhong Guo gch981213 at gmail.com
Sun Feb 14 01:34:08 EST 2016


This patch adds support for Phicomm PSG1208.This is a router with MT7620A SoC with 8M flash and 64M ram.
The WPS led is uesd as status_led because the power light can't be controlled with GPIO.
It seems that the 5g wifi led is connected to MT7612E and it can't be controlled with GPIO too.

Signed-off-by: Chuanhong Guo <gch981213 at gmail.com>
---
 target/linux/ramips/base-files/etc/board.d/01_leds |   3 +
 .../linux/ramips/base-files/etc/board.d/02_network |   1 +
 target/linux/ramips/base-files/etc/diag.sh         |   3 +-
 target/linux/ramips/base-files/lib/ramips.sh       |   3 +
 .../ramips/base-files/lib/upgrade/platform.sh      |   1 +
 target/linux/ramips/dts/PSG1208.dts                | 114 +++++++++++++++++++++
 target/linux/ramips/image/Makefile                 |   2 +
 target/linux/ramips/mt7620/profiles/phicomm.mk     |  16 +++
 8 files changed, 142 insertions(+), 1 deletion(-)
 create mode 100644 target/linux/ramips/dts/PSG1208.dts
 create mode 100644 target/linux/ramips/mt7620/profiles/phicomm.mk

diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds
index b10f5f1..d1b4e15 100755
--- a/target/linux/ramips/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/base-files/etc/board.d/01_leds
@@ -208,6 +208,9 @@ pbr-m1)
 	ucidef_set_led_default "power" "power" "$board:blue:power" "1"
 	ucidef_set_led_default "sys" "sys" "$board:blue:sys" "1"
 	;;
+psg1208)
+	set_wifi_led "$board:white:wlan2g"
+	;;
 px-4885)
 	set_wifi_led "$board:orange:wifi"
 	set_usb_led "$board:blue:storage"
diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index 9853729..0121e51 100755
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -74,6 +74,7 @@ ramips_setup_interfaces()
 	mzk-w300nh2|\
 	oy-0001|\
 	pbr-m1|\
+	psg1208|\
 	sap-g3200u3|\
 	wf-2881|\
 	whr-300hp2|\
diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
index 59c5965..c7c7815 100644
--- a/target/linux/ramips/base-files/etc/diag.sh
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -75,7 +75,8 @@ get_status_led() {
 	dir-645)
 		status_led="$board:green:wps"
 		;;
-	cf-wr800n)
+	cf-wr800n|\
+	psg1208)
 		status_led="$board:white:wps"
 		;;
 	cy-swr1100|\
diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
index aed8350..c6c32fe 100755
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -292,6 +292,9 @@ ramips_board_detect() {
 	*"PBR-M1")
 		name="pbr-m1"
 		;;
+	*"PSG1208")
+		name="psg1208"
+		;;
 	*"PSR-680W"*)
 		name="psr-680w"
 		;;
diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index 78edd22..5575b4c 100755
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -84,6 +84,7 @@ platform_check_image() {
 	nw718|\
 	oy-0001|\
 	pbr-m1|\
+	psg1208|\
 	psr-680w|\
 	px-4885|\
 	re6500|\
diff --git a/target/linux/ramips/dts/PSG1208.dts b/target/linux/ramips/dts/PSG1208.dts
new file mode 100644
index 0000000..c3be8ef
--- /dev/null
+++ b/target/linux/ramips/dts/PSG1208.dts
@@ -0,0 +1,114 @@
+/dts-v1/;
+
+/include/ "mt7620a.dtsi"
+
+/ {
+	compatible = "PSG1208", "ralink,mt7620a-soc";
+	model = "Phicomm PSG1208";
+
+	palmbus at 10000000 {
+		gpio1: gpio at 638 {
+			status = "okay";
+		};
+
+		gpio3: gpio at 688 {
+			status = "okay";
+		};
+
+		spi at b00 {
+			status = "okay";
+
+			m25p80 at 0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "jedec,spi-nor";
+				reg = <0 0>;
+				linux,modalias = "m25p80", "en25q64";
+				spi-max-frequency = <10000000>;
+
+				partition at 0 {
+					label = "u-boot";
+					reg = <0x0 0x30000>;
+					read-only;
+				};
+
+				partition at 20000 {
+					label = "u-boot-env";
+					reg = <0x30000 0x10000>;
+					read-only;
+				};
+
+				factory: partition at 30000 {
+					label = "factory";
+					reg = <0x40000 0x10000>;
+					read-only;
+				};
+
+				partition at 40000 {
+					label = "firmware";
+					reg = <0x50000 0x7b0000>;
+				};
+			};
+		};
+	};
+
+	pinctrl {
+		state_default: pinctrl0 {
+			gpio {
+				ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "ephy", "wled", "nd_sd";
+				ralink,function = "gpio";
+			};
+		};
+	};
+
+	ethernet at 10100000 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&ephy_pins>;
+		mtd-mac-address = <&factory 0x4>;
+		mediatek,portmap = "llllw";
+	};
+
+	pcie at 10140000 {
+		status = "okay";
+
+		pcie-bridge {
+			mt76 at 0,0 {
+				reg = <0x0000 0 0 0 0>;
+				device_type = "pci";
+				mediatek,mtd-eeprom = <&factory 0x8000>;
+				mediatek,2ghz = <0>;
+			};
+		};
+	};
+
+	wmac at 10180000 {
+		ralink,mtd-eeprom = <&factory 0>;
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		wan {
+			label = "psg1208:white:wps";
+			gpios = <&gpio1 15 1>;
+		};
+
+		wlan {
+			label = "psg1208:white:wlan2g";
+			gpios = <&gpio3 0 1>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <20>;
+
+		reset {
+			label = "reset";
+			gpios = <&gpio0 1 1>;
+			linux,code = <0x198>;
+		};
+	};
+};
diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile
index a42f8b9..8bdd76a 100644
--- a/target/linux/ramips/image/Makefile
+++ b/target/linux/ramips/image/Makefile
@@ -937,6 +937,7 @@ Image/Build/Profile/HC5661=$(call BuildFirmware/Default16M/$(1),$(1),hc5661,HC56
 Image/Build/Profile/HC5761=$(call BuildFirmware/Default16M/$(1),$(1),hc5761,HC5761)
 Image/Build/Profile/HC5861=$(call BuildFirmware/Default16M/$(1),$(1),hc5861,HC5861)
 Image/Build/Profile/OY-0001=$(call BuildFirmware/Default16M/$(1),$(1),oy-0001,OY-0001)
+Image/Build/Profile/PSG1208=$(call BuildFirmware/Default8M/$(1),$(1),psg1208,PSG1208)
 Image/Build/Profile/Y1=$(call BuildFirmware/Default16M/$(1),$(1),y1,Y1)
 Image/Build/Profile/Y1S=$(call BuildFirmware/Default16M/$(1),$(1),y1s,Y1S)
 Image/Build/Profile/MLW221=$(call BuildFirmware/Default16M/$(1),$(1),mlw221,MLW221)
@@ -978,6 +979,7 @@ define Image/Build/Profile/Default
 	$(call Image/Build/Profile/HC5761,$(1))
 	$(call Image/Build/Profile/HC5861,$(1))
 	$(call Image/Build/Profile/OY-0001,$(1))
+	$(call Image/Build/Profile/PSG1208,$(1))
 	$(call Image/Build/Profile/Y1,$(1))
 	$(call Image/Build/Profile/Y1S,$(1))
 	$(call Image/Build/Profile/MLW221,$(1))
diff --git a/target/linux/ramips/mt7620/profiles/phicomm.mk b/target/linux/ramips/mt7620/profiles/phicomm.mk
new file mode 100644
index 0000000..e083a4c
--- /dev/null
+++ b/target/linux/ramips/mt7620/profiles/phicomm.mk
@@ -0,0 +1,16 @@
+#
+# Copyright (C) 2016 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/PSG1208
+	NAME:=Phicomm PSG1208
+	PACKAGES:=kmod-mt76
+endef
+
+define Profile/PSG1208/Description
+	Default package set for Phicomm PSG1208.
+endef
+$(eval $(call Profile,PSG1208))
-- 
2.5.0
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel



More information about the openwrt-devel mailing list