[OpenWrt-Devel] lantiq DSL drivers / firmware info
johannes at sipsolutions.net
Tue May 5 03:31:22 EDT 2015
On Tue, 2015-05-05 at 09:28 +0200, Sylwester Petela wrote:
> >> [ 458.772000] DSL: WARNING - Data Path counters are not supported
> >> for the FE!
> > That seems pretty harmless - the driver code is really really ugly
> > though. Probably should just remove the message.
> Cannot find witch function this message is referring to, need to
> investigate more.
I found it in Martin's drv_dsl_cpe_api_vrx repository.
> >> vectoring and ReTx works acording to friend but system log shows some
> >> errors as well like on my ADSL line but not so many.
> > What firmware/driver combination was this with?
> xcpe_567517_562301.bin: VDSL over ISDN incl. vectoring support for
> VRX200, version: 6.7.5 | ADSL Annex A for VRX200, version: 6.2.3
> 4.15.2 -app/control; 1.4.5 -mei
Ok, I'll give that a try as soon as I've removed this from my productive
Or perhaps I'll just put another image on a separate extroot since I
have extroot setup anyway.
> Yes slow but why ? Because of load or because of hardware, Zyxel on
> stock openwrt driver can achieve 80Mbps without that much load.
Not sure, perhaps the CPU is just slow?
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
More information about the openwrt-devel