[OpenWrt-Devel] lantiq DSL drivers / firmware info
sscapi at gmail.com
Tue May 5 03:28:23 EDT 2015
W dniu 2015-05-05 o 08:56, Johannes Berg pisze:
> On Mon, 2015-05-04 at 23:16 +0200, Sylwester Petela wrote:
>> [ 456.056000] DSL: negative response for MsgID=0x2B0A
>> (Class=0x00003100) - on try 0!
>> [ 456.764000] DSL: Error for send CMD MsgID=0x2B0A - KEEP line!
>> [ 456.768000] DSL: ERROR - ReTx PM counters read failed!
>> [ 457.032000] MEI_DRV[00 - 01]: ReadAck[0x2B0A] - FctOP ERROR 0x31!
>> and after about 20-30 min hangs, after disabling ReTx at build system
> How did you disable ReTx?
Added to makefile in vdsl-app and vdsl-control
vdsl_cpe_control commands were ignored when trying to disable it by them.
>> stays online for at least 6 hours (didn't test further) with some
>> warnings repeating every two seconds:
>> [ 458.772000] DSL: WARNING - Data Path counters are not supported
>> for the FE!
> That seems pretty harmless - the driver code is really really ugly
> though. Probably should just remove the message.
Cannot find witch function this message is referring to, need to
>> vectoring and ReTx works acording to friend but system log shows some
>> errors as well like on my ADSL line but not so many.
> What firmware/driver combination was this with?
xcpe_567517_562301.bin: VDSL over ISDN incl. vectoring support for
VRX200, version: 6.7.5 | ADSL Annex A for VRX200, version: 6.2.3
4.15.2 -app/control; 1.4.5 -mei
>> On ADSL and also on VDSL with never firmware and errors/warnings
>> appearing in log, system is under quite big load, compared to stock drivers.
> Yeah, this is true. I'm not sure what I said yesterday ("it's too slow")
> is correct, but certainly it's pretty loaded.
Yes slow but why ? Because of load or because of hardware, Zyxel on
stock openwrt driver can achieve 80Mbps without that much load.
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
More information about the openwrt-devel