[OpenWrt-Devel] DS-Lite interface is not coming up.
cyrus at openwrt.org
Fri Mar 13 08:09:59 EDT 2015
> config interface 'wan6'
> option proto 'static'
> option ifname 'eth1'
> option ip6addr '2001::50'
> config interface 'lq'
> option proto 'dslite'
> option ip6addr '2001::100'
> option peeraddr '2001::200'
> option tunlink 'wan6'
In your dslite section you define your local endpoint address to be
2001::100 however in your wan6 section you define your local IPv6
address to be 2001::50. This seems wrong.
You should either set both to the same value or simply omit option
ip6addr from the dslite section so it is autodetected.
Also (as noted in the last mail): if you run into further issues please
post the output of the command:
"ubus call network.interface dump" so we get to see status messages from
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
More information about the openwrt-devel