[OpenWrt-Devel] [PATCH] ramips: adding support for OY-0001 Wireless Router

LiWeijian younfan33 at hotmail.com
Mon Jul 6 03:24:20 EDT 2015


From: Tom Deng <2579131212 at qq.com>

Adding support for OY-0001 Wireless Router.
OY-0001 is a wireless router made by oyewifi.com. Below is the details:
MT7620A, 128MB DDR2, 16MB FLASH, SD Slot, USB 2.0, 4 x LAN + 1 x WAN.
Signed-off-by: Tom Deng <2579131212 at qq.com>
---
diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
index 74b8867..35a64dd 100755
--- a/target/linux/ramips/base-files/etc/diag.sh
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -186,6 +186,9 @@ get_status_led() {
 	f7c027)
 		status_led="belkin:orange:status"
 		;;
+	oy-0001)
+		status_led="oy:green:wifi"
+		;;
 	na930)
 		status_led="na930:blue:power"
 		;;
diff --git a/target/linux/ramips/base-files/etc/uci-defaults/01_leds b/target/linux/ramips/base-files/etc/uci-defaults/01_leds
index 5d6ed2b..265525a 100755
--- a/target/linux/ramips/base-files/etc/uci-defaults/01_leds
+++ b/target/linux/ramips/base-files/etc/uci-defaults/01_leds
@@ -199,6 +199,10 @@ case $board in
 		set_wifi_led "zbtlink:blue:air"
 		set_usb_led "zbtlink:blue:usb"
 		;;
+	oy-0001)
+		ucidef_set_led_default "power" "power" "oy:green:power" "1"
+		set_wifi_led "oy:green:wifi"
+		;;
 	wr8305rt)
 		ucidef_set_led_default "power" "power" "wr8305rt:sys" "1"
 		set_usb_led "wr8305rt:usb"
diff --git a/target/linux/ramips/base-files/etc/uci-defaults/02_network b/target/linux/ramips/base-files/etc/uci-defaults/02_network
index c3ea489..b847a1b 100755
--- a/target/linux/ramips/base-files/etc/uci-defaults/02_network
+++ b/target/linux/ramips/base-files/etc/uci-defaults/02_network
@@ -104,6 +104,7 @@ ramips_setup_interfaces()
 	dir-615-h1 | \
 	hlk-rm04 | \
 	mzk-w300nh2 | \
+	oy-0001 | \
 	mzk-750dhp)
 		ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
 		ucidef_add_switch "switch0" "1" "1"
@@ -221,6 +222,11 @@ ramips_setup_macs()
 		wan_mac=$(mtd_get_mac_binary devdata 7)
 		;;
 
+	oy-0001)
+		lan_mac=$(mtd_get_mac_binary factory 40)
+		wan_mac=$(mtd_get_mac_binary factory 46)
+		;;
+
 	w306r-v20)
 		lan_mac=$(cat /sys/class/net/eth0/address)
 		wan_mac=$(macaddr_add "$lan_mac" 5)
diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
index fd03423..f95adc5 100755
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -325,6 +325,9 @@ ramips_board_detect() {
 	*"Zbtlink ZBT-WA05")
 		name="zbt-wa05"
 		;;
+	*"OY-0001")
+		name="oy-0001"
+		;;
 	*"ZBT WR8305RT")
 		name="wr8305rt"
 		;;
diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index ba69a89..ad35f9d 100755
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -96,6 +96,7 @@ platform_check_image() {
 	wmr300 |\
 	wr8305rt |\
 	wrtnode |\
+	oy-0001 |\
 	x5 |\
 	x8 |\
 	zbt-wa05 |\
diff --git a/target/linux/ramips/dts/OY-0001.dts b/target/linux/ramips/dts/OY-0001.dts
new file mode 100644
index 0000000..48b7099
--- /dev/null
+++ b/target/linux/ramips/dts/OY-0001.dts
@@ -0,0 +1,123 @@
+/dts-v1/;
+
+/include/ "mt7620a.dtsi"
+
+/ {
+	compatible = "ralink,mt7620a-soc";
+	model = "OY-0001";
+
+        chosen {
+                bootargs = "console=ttyS0,115200";
+        };
+
+	palmbus at 10000000 {
+		gpio2: gpio at 660 {
+			status = "okay";
+		};
+
+		gpio3: gpio at 688 {
+			status = "okay";
+		};
+
+		spi at b00 {
+			status = "okay";
+
+			m25p80 at 0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "w25q128";
+				reg = <0 0>;
+				linux,modalias = "m25p80", "w25q128";
+				spi-max-frequency = <10000000>;
+
+				partition at 0 {
+					label = "u-boot";
+					reg = <0x0 0x30000>;
+					read-only;
+				};
+
+				partition at 30000 {
+					label = "u-boot-env";
+					reg = <0x30000 0x10000>;
+					read-only;
+				};
+
+				factory: partition at 40000 {
+					label = "factory";
+					reg = <0x40000 0x10000>;
+					read-only;
+				};
+
+				partition at 50000 {
+					label = "firmware";
+					reg = <0x50000 0xfb0000>;
+				};
+
+			};
+		};
+	};
+
+	pinctrl {
+		state_default: pinctrl0 {
+			gpio {
+				ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "nd_sd";
+				ralink,function = "gpio";
+			};
+		};
+	};
+
+	ethernet at 10100000 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&ephy_pins>;
+
+		ralink,port-map = "llllw";
+	};
+
+	gsw at 10110000 {
+		ralink,port4 = "ephy";
+	};
+
+	wmac at 10180000 {
+		ralink,mtd-eeprom = <&factory 0>;
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		powerled {
+			label = "oy:green:power";
+			gpios = <&gpio0 9 1>;
+		};
+		wifiled {
+			label = "oy:green:wifi";
+			gpios = <&gpio3 0 1>;
+		};
+	};
+
+	sdhci at 10130000 {
+		status = "okay";
+	};
+
+	ehci at 101c0000 {
+		status = "okay";
+	};
+
+	ohci at 101c1000 {
+		status = "okay";
+	};
+
+	pcie at 10140000 {
+		status = "okay";
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <20>;
+		s1 {
+			label = "reset";
+			gpios = <&gpio0 1 1>;
+			linux,code = <0x198>;
+		};
+	};
+};
diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile
index 86200ab..73ad961 100644
--- a/target/linux/ramips/image/Makefile
+++ b/target/linux/ramips/image/Makefile
@@ -724,6 +724,7 @@ Image/Build/Profile/DIR-810L=$(call BuildFirmware/CustomFlash/$(1),$(1),dir-810l
 na930_mtd_size=20971520
 Image/Build/Profile/NA930=$(call BuildFirmware/CustomFlash/$(1),$(1),na930,NA930,$(na930_mtd_size))
 Image/Build/Profile/MZK-750DHP=$(call BuildFirmware/Default8M/$(1),$(1),mzk-750dhp,MZK-750DHP)
+Image/Build/Profile/OY-0001=$(call BuildFirmware/Default16M/$(1),$(1),oy-0001,OY-0001)
 Image/Build/Profile/Y1=$(call BuildFirmware/Default16M/$(1),$(1),Lenovo-y1,Y1)
 Image/Build/Profile/Y1S=$(call BuildFirmware/Default16M/$(1),$(1),Lenovo-y1s,Y1S)
 
@@ -740,6 +741,7 @@ define Image/Build/Profile/Default
 	$(call Image/Build/Profile/WHR1166D,$(1))
 	$(call Image/Build/Profile/MZK-750DHP,$(1))
 	$(call Image/Build/Profile/NA930,$(1))
+	$(call Image/Build/Profile/OY-0001,$(1))
 	$(call Image/Build/Profile/Y1,$(1))
 	$(call Image/Build/Profile/Y1S,$(1))
 endef
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel



More information about the openwrt-devel mailing list