[OpenWrt-Devel] lantiq v3.18
sscapi at gmail.com
Fri Feb 13 03:23:16 EST 2015
PCI works, I have one more issue (present from 3.14 kernel) , unit will
hang (without any errors in console output) when trying to reboot from
cli/luci, but only when dsl_control is started at boot, without attached
line or with dsl_control excluded from running on boot, everything
works ok, even trying to stop dsl_control before reboot doesn't help.
I'm thinking that dts for P-2812HNU has something to do with it, but I
cannot trace it.
W dniu 2015-02-12 o 18:38, John Crispin pisze:
> On 12/02/2015 18:33, John Crispin wrote:
>> On 12/02/2015 18:30, Daniel Gimpelevich wrote:
>>> On Thu, Feb 12, 2015 at 8:54 AM, Daniel Gimpelevich
>>> <daniel at gimpelevich.san-francisco.ca.us
>>> <mailto:daniel at gimpelevich.san-francisco.ca.us>> wrote:
>>> On Thu, Feb 12, 2015 at 3:19 AM, John Crispin
>>> <blogic at openwrt.org <mailto:blogic at openwrt.org>> wrote:
>>> On 10/02/2015 10:40, Daniel Gimpelevich wrote:
>>>> Is there a patchset I could try?
>>> try r44421 or newer
>>> Tried initramfs, bootlog attached.
>>> With this image, booting from SPI flash still fails, because
>>> there is no longer a "kernel" partition, so the rootfs is now
>>> /dev/mtdblock4, while the DTS file still specifies
>> and why does that cause booting to fail ?
> ah i see, not even sure why we attach that info. the mtdsplid should
> automatically set the root=
> try removing the root= parameter please and see if it boots properly
>> _______________________________________________ openwrt-devel
>> mailing list openwrt-devel at lists.openwrt.org
> openwrt-devel mailing list
> openwrt-devel at lists.openwrt.org
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
More information about the openwrt-devel