[OpenWrt-Devel] [PATCH] ramips: Added WIZnet WizFi630A Platform based on Ralink RT5350

Tobias Welz tw at wiznet.eu
Fri Aug 28 08:10:37 EDT 2015


This patch is to add the WIZnet WizFi630A board as a new platform. The board is in mini pci express form factor.

Signed-off-by: Tobias Welz <tw at wiznet.eu>
---
 .../linux/ramips/base-files/etc/board.d/02_network |   10 ++
 target/linux/ramips/base-files/etc/diag.sh         |    3 +
 target/linux/ramips/base-files/lib/ramips.sh       |    3 +
 .../ramips/base-files/lib/upgrade/platform.sh      |    1 +
 target/linux/ramips/dts/WIZFI630A.dts              |  180 ++++++++++++++++++++
 target/linux/ramips/image/Makefile                 |    4 +-
 target/linux/ramips/rt305x/profiles/wiznet.mk      |   17 ++
 7 files changed, 217 insertions(+), 1 deletion(-)
 create mode 100644 target/linux/ramips/dts/WIZFI630A.dts
 create mode 100644 target/linux/ramips/rt305x/profiles/wiznet.mk

diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index 6a2f042248d3..20f3367ac329 100755
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -217,6 +217,12 @@ ramips_setup_interfaces()
 		ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 6t"
 		ucidef_add_switch_vlan "switch0" "2" "5 6t"
 		;;
+	wizfi630a)
+		ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+		ucidef_add_switch "switch0" "1" "1"
+		ucidef_add_switch_vlan "switch0" "1" "1 2 6t"
+		ucidef_add_switch_vlan "switch0" "2" "0 6t"
+		;;
 	y1s)
 		ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
 		ucidef_add_switch "switch0" "1" "1"
@@ -327,6 +333,10 @@ ramips_setup_macs()
 		wan_mac=$(mtd_get_mac_binary factory 4)
 		lan_mac=$wan_mac
 		;;
+	wizfi630a)
+		lan_mac=$(mtd_get_mac_binary factory 4)
+		wan_mac=$(mtd_get_mac_binary factory 40)
+		;;
 	wsr-1166)
 		local index="$(find_mtd_index "board_data")"
 		wan_mac="$(grep -m1 mac= "/dev/mtd${index}" | cut -d= -f2)"
diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
index a4911b023cba..dfa0d02371ef 100644
--- a/target/linux/ramips/base-files/etc/diag.sh
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -165,6 +165,9 @@ get_status_led() {
 	wzr-agl300nh)
 		status_led="$board:green:router"
 		;;
+	wizfi630a)
+		status_led="$board::run"
+		;;
 	wsr-1166|\
 	wsr-600)
 		status_led="$board:orange:diag"
diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
index 5cafd4593d60..7cdf22512afa 100755
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -367,6 +367,9 @@ ramips_board_detect() {
 	*"WIZARD 8800")
 		name="wizard8800"
 		;;
+	*"WizFi630A")
+		name="wizfi630a"
+		;;                
 	*"WL-330N")
 		name="wl-330n"
 		;;
diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index 53e7070c99c9..b907faa57885 100755
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -107,6 +107,7 @@ platform_check_image() {
 	whr-300hp2|\
 	whr-600d|\
 	whr-g300n|\
+	wizfi630a|\
 	wl-330n|\
 	wl-330n3g|\
 	wl-341v3|\
diff --git a/target/linux/ramips/dts/WIZFI630A.dts b/target/linux/ramips/dts/WIZFI630A.dts
new file mode 100644
index 000000000000..f2818ce9df8a
--- /dev/null
+++ b/target/linux/ramips/dts/WIZFI630A.dts
@@ -0,0 +1,180 @@
+/dts-v1/;
+
+/include/ "rt5350.dtsi"
+
+/ {
+	compatible = "wizfi630a", "ralink,rt5350-soc";
+	model = "WIZnet WizFi630A";
+
+	chosen {
+		bootargs = "console=ttyS1,115200";
+	};
+
+	palmbus at 10000000 {
+		gpio1: gpio at 660 {
+			status = "okay";
+		};
+
+		spi at b00 {
+			status = "okay";
+
+			m25p80 at 0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "w25q128";
+				reg = <0>;
+				linux,modalias = "m25p80", "w25q128";
+				spi-max-frequency = <10000000>;
+
+				partition at 0 {
+					label = "uboot";
+					reg = <0x0 0x30000>;
+					read-only;
+				};
+
+				partition at 30000 {
+					label = "uboot-env";
+					reg = <0x30000 0x10000>;
+					read-only;
+				};
+
+				factory: partition at 40000 {
+					label = "factory";
+					reg = <0x40000 0x10000>;
+					read-only;
+				};
+
+				partition at 50000 {
+					label = "firmware";
+					reg = <0x50000 0xfb0000>;
+				};
+			};
+		};
+
+		uart at 500 {
+			compatible = "ralink,mt7620a-uart", "ralink,rt2880-uart", "ns16550a";
+			reg = <0x500 0x100>;
+			resets = <&rstctrl 12>;
+			reset-names = "uart";
+			interrupt-parent = <&intc>;
+			interrupts = <5>;
+			reg-shift = <2>;
+			status = "okay";
+		};
+
+		uartlite at c00 {
+			compatible = "ralink,mt7620a-uart", "ralink,rt2880-uart", "ns16550a";
+			reg = <0xc00 0x100>;
+			resets = <&rstctrl 19>;
+			reset-names = "uartl";
+			interrupt-parent = <&intc>;
+			interrupts = <12>;
+			reg-shift = <2>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&uartlite_pins>;
+		};
+	};
+
+	pinctrl {
+		state_default: pinctrl0 {
+			gpio {
+				ralink,group = "i2c", "jtag" ;
+				ralink,function = "gpio";
+			};
+		};
+
+		uartf_gpio_pins: uartf_gpio {
+			uartf_gpio {
+				ralink,group = "uartf";
+				ralink,function = "uartf";
+			};
+		};
+
+		uartlite_pins: uartlite {
+			uart {
+				ralink,group = "uartlite";
+				ralink,function = "uartlite";
+			};
+		};
+	};
+
+	ethernet at 10100000 {
+		mtd-mac-address = <&factory 0x4>;
+	};
+
+	esw at 10110000 {
+		ralink,portmap = <0x17>;
+	};
+
+	wmac at 10180000 {
+		ralink,mtd-eeprom = <&factory 0>;
+	};
+
+	ehci at 101c0000 {
+		status = "okay";
+	};
+
+	ohci at 101c1000 {
+		status = "okay";
+	};
+
+	gpio-export {
+		compatible = "gpio-export";
+		#size-cells = <0>;
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		run {
+			label = "wizfi630a::run";
+			gpios = <&gpio0 1 1>;
+		};
+
+		wps {
+			label = "wizfi630a::wps";
+			gpios = <&gpio0 20 1>;
+		};
+
+		uart1 {
+			label = "wizfi630a::uart1";
+			gpios = <&gpio0 18 1>;
+		};
+
+		uart2 {
+			label = "wizfi630a::uart2";
+			gpios = <&gpio0 21 1>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <20>;
+
+		reset {
+			label = "reset";
+			gpios = <&gpio0 17 1>;
+			linux,code = <0x198>;
+		};
+
+		wps {
+			label = "wps";
+			gpios = <&gpio0 0 1>;
+			linux,code = <0x211>;
+		};
+		
+		scm1 {
+			label = "SCM1";
+			gpios = <&gpio0 19 1>;
+			linux,code = <0x100>;
+		};
+
+		scm2 {
+			label = "SCM2";
+			gpios = <&gpio0 2 1>;
+			linux,code = <0x101>;
+		};
+	};
+};
diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile
index 2f4d4cbc617d..ac2e83cbb3de 100644
--- a/target/linux/ramips/image/Makefile
+++ b/target/linux/ramips/image/Makefile
@@ -608,7 +608,6 @@ Image/Build/Profile/W502U=$(call BuildFirmware/Default8M/$(1),$(1),w502u,W502U)
 
 Image/Build/Profile/WCR150GN=$(call BuildFirmware/Default4M/$(1),$(1),wcr150gn,WCR150GN)
 
-
 Image/Build/Profile/MZK-DP150N=$(call BuildFirmware/Default4M/$(1),$(1),mzk-dp150n,MZK-DP150N)
 
 buffalo_whrg300n_mtd_size=3801088
@@ -631,6 +630,8 @@ Image/Build/Profile/WHRG300N=$(call BuildFirmware/WHRG300N/$(1),$(1))
 
 Image/Build/Profile/WIZARD8800=$(call BuildFirmware/Default8M/$(1),$(1),wizard-8800,WIZARD8800,Linux Kernel Image)
 
+Image/Build/Profile/WIZFI630A=$(call BuildFirmware/Default16M/$(1),$(1),wizfi630a,WIZFI630A)
+
 Image/Build/Profile/WL-330N=$(call BuildFirmware/Default4M/$(1),$(1),wl-330n,WL-330N)
 
 Image/Build/Profile/WL-330N3G=$(call BuildFirmware/Default4M/$(1),$(1),wl-330n3g,WL-330N3G)
@@ -763,6 +764,7 @@ define Image/Build/Profile/Default
 	$(call Image/Build/Profile/WCR150GN,$(1))
 	$(call Image/Build/Profile/WHRG300N,$(1))
 	$(call Image/Build/Profile/WIZARD8800,$(1))
+	$(call Image/Build/Profile/WIZFI630A,$(1))
 	$(call Image/Build/Profile/WL-330N,$(1))
 	$(call Image/Build/Profile/WL-330N3G,$(1))
 	$(call Image/Build/Profile/WL-341V3,$(1))
diff --git a/target/linux/ramips/rt305x/profiles/wiznet.mk b/target/linux/ramips/rt305x/profiles/wiznet.mk
new file mode 100644
index 000000000000..f8e83242898d
--- /dev/null
+++ b/target/linux/ramips/rt305x/profiles/wiznet.mk
@@ -0,0 +1,17 @@
+#
+# Copyright (C) 2015 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/WIZFI630A
+	NAME:=WIZnet WizFi630A
+	PACKAGES:=\
+		kmod-usb2 
+endef
+
+define Profile/WIZFI630A/Description
+	Package set for WIZnet WizFi630A board
+endef
+$(eval $(call Profile,WIZFI630A))
-- 
1.7.10.4
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel



More information about the openwrt-devel mailing list