[OpenWrt-Devel] mpd breaks openwrt compilation

[Ernesto]

Hi Jiří,

you were right, I was missing gettext. Such a rookie mistake.

Thanks!!

El 14/09/2014 05:25, Jiří Šlachta escribió:
> Hello Ernesto,
> 
> I suppose you are missing some dependencies. According to your output,
> it seems that you might be missing the GNU gettext library.
> 
> If you are using Debian/Ubuntu, it is enough to call:
> 
> 	aptitude install gettext
> 
> or
> 
> 	apt-get install gettext
> 
> I would also recommend adding more feeds into your buildroot, since the
> feed installation does only mean that the installed packages are 
> visible
> in the menuconfig. Consequently, the selected packages from menuconfig
> should be located within the compiled and generated system image. The
> recommendation only comes from the point that you might be missing some
> dependencies.
> 
> I would also recommend to visit the OpenWrt wiki page to see what 
> packages
> are required to have OpenWrt buildroot fully functional. See the 
> dependencies
> on the link below:
> 
> 	http://wiki.openwrt.org/doc/howto/buildroot.exigence
> 
> Kind regards,
> Jiri
> 
> Dne 13/09/2014 v 23:34 Ernesto napsal(a):
>> Hi again,
>> 
>> El 13/05/2014 14:24, Ernesto escribió:
>>> I'm compiling trunk r40755. I can add some feeds:
>>> 
>>> ./scripts/feeds update
>>> ./scripts/feeds install luci-light alsa-utils bluez-utils
>>> 
>>> and with menuconfig I can select those packages and compile all 
>>> right.
>>> But when I add mpd:
>>> 
>>> ./scripts/feeds install mpd
>>> 
>>> and select it with menuconfig, the compilation breaks with the 
>>> following error:
>>> 
>> 
>> I tried compiling one more time today, and the same error occurs, only 
>> with different glib version:
>> 
>> checking for msgfmt... no
>> configure: error:
>> *** You must have either have gettext support in your C library, or 
>> use the
>> *** GNU gettext library. 
>> (http://www.gnu.org/software/gettext/gettext.html
>> 
>> Makefile:101: recipe for target 
>> '/hulk/bwf/mnt_trunk/trunk/openwrt/build_dir/host/glib-2.41.1/.configured' 
>> failed
>> make[3]: *** 
>> [/hulk/bwf/mnt_trunk/trunk/openwrt/build_dir/host/glib-2.41.1/.configured] 
>> Error 1
>> make[3]: Leaving directory 
>> '/hulk/bwf/mnt_trunk/trunk/openwrt/feeds/packages/libs/glib2'
>> package/Makefile:174: recipe for target 
>> 'package/feeds/packages/glib2/host/compile' failed
>> make[2]: *** [package/feeds/packages/glib2/host/compile] Error 2
>> make[2]: Leaving directory '/hulk/bwf/mnt_trunk/trunk/openwrt'
>> package/Makefile:171: recipe for target 
>> '/hulk/bwf/mnt_trunk/trunk/openwrt/staging_dir/target-mips_mips32_uClibc-0.9.33.2/stamp/.package_compile' 
>> failed
>> make[1]: *** 
>> [/hulk/bwf/mnt_trunk/trunk/openwrt/staging_dir/target-mips_mips32_uClibc-0.9.33.2/stamp/.package_compile] 
>> Error 2
>> make[1]: Leaving directory '/hulk/bwf/mnt_trunk/trunk/openwrt'
>> /hulk/bwf/mnt_trunk/trunk/openwrt/include/toplevel.mk:171: recipe for 
>> target 'world' failed
>> make: *** [world] Error 2
>> 
>> I used git and don't know if the svn revision equivalent would be
>> 
>> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42514 
>> 3c298f89-4303-0410-b956-a3cf2f4a3e73
>> 
>>> 
>>> I compiled mpd successfully in trunk r39441, but I can't recreate the
>>> feed state at that time.
>>> 
>>> Any suggestion?
>> 
>> I hope someone can shed some light into this.
>> 
>> Regards.
>> _______________________________________________
>> openwrt-devel mailing list
>> openwrt-devel at lists.openwrt.org
>> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel