[OpenWrt-Devel] Mips Creator CI20 OpenWRT support.
blogic at openwrt.org
Wed Nov 26 01:35:12 EST 2014
On 25/11/2014 21:44, José Vázquez wrote:
> Few weeks ago i've received a Mips CI20 and began to port it to
> openwrt using kernel 3.18-rc4.
> For now only few peripherals work "fine" but is more than i initially expected.
> Still there are a lot of peripherals to be included, but for initial
> tests is enough for me.
> The cpu performance is a bit disappointing if is taken in mind that
> runs at 1'2GHz and the ethernet tests with iperf showed <80Mb/s with
> one thread and <65 with 100.
> Compiling without generic patches 132-mips_inline_dma_ops,
> 259-regmap_dynamic, 305-mips_module_reloc,
> 306-mips_mem_functions_performance and 309-mips_fuse_workaround I were
> able to enable msc1 and test brcmfmac, but no success: the driver
> recognizes the bcm4330 but it is unable to configure it correctly.
> Now i'm working to add the remaining drivers that work with kernel
> 3.16. What i previously made was simple rebases from the code wrote by
> Zubair Lutfullah and Paul Burton with a couple of changes in pinctrl
> and dma drivers.
> Any comment will be very appreciated.
why do you invest a huge amount of time into a piece of PR hardware ?
the creator board only serves the purpose to generate a PR hype. i dont
think it was ever intended to be used for anything real life.
> openwrt-devel mailing list
> openwrt-devel at lists.openwrt.org
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
More information about the openwrt-devel