[OpenWrt-Devel] [PATCH] [luci] Improve spelling and grammar
Alex Henrie
alexhenrie24 at gmail.com
Thu Jul 24 15:52:42 EDT 2014
Signed-off-by: Alex Henrie <alexhenrie24 at gmail.com>
---
applications/luci-ahcp/luasrc/model/cbi/ahcp.lua | 2 +-
.../luci-firewall/luasrc/model/cbi/firewall/zone-details.lua | 2 +-
.../luci-meshwizard/luasrc/model/cbi/freifunk/meshwizard.lua | 2 +-
applications/luci-watchcat/luasrc/model/cbi/watchcat/watchcat.lua | 8 ++++----
applications/luci-wol/luasrc/model/cbi/wol.lua | 2 +-
applications/luci-wshaper/luasrc/model/cbi/wshaper.lua | 2 +-
modules/admin-full/luasrc/controller/admin/system.lua | 2 +-
modules/admin-full/luasrc/model/cbi/admin_network/dhcp.lua | 2 +-
modules/admin-full/luasrc/model/cbi/admin_network/ifaces.lua | 2 +-
modules/admin-full/luasrc/model/cbi/admin_network/wifi.lua | 2 +-
modules/admin-full/luasrc/model/cbi/admin_network/wifi_add.lua | 2 +-
modules/admin-full/luasrc/model/cbi/admin_system/system.lua | 2 +-
modules/admin-full/luasrc/view/admin_network/wifi_overview.htm | 2 +-
modules/admin-full/luasrc/view/admin_system/flashops.htm | 2 +-
modules/admin-full/luasrc/view/admin_system/upgrade.htm | 2 +-
modules/admin-mini/luasrc/view/mini/upgrade.htm | 4 ++--
modules/failsafe/luasrc/controller/failsafe/failsafe.lua | 2 +-
modules/failsafe/luasrc/view/failsafe/flashops.htm | 2 +-
modules/failsafe/luasrc/view/failsafe/upgrade.htm | 2 +-
19 files changed, 23 insertions(+), 23 deletions(-)
diff --git a/applications/luci-ahcp/luasrc/model/cbi/ahcp.lua b/applications/luci-ahcp/luasrc/model/cbi/ahcp.lua
index 18764a1..a48f8b4 100644
--- a/applications/luci-ahcp/luasrc/model/cbi/ahcp.lua
+++ b/applications/luci-ahcp/luasrc/model/cbi/ahcp.lua
@@ -14,7 +14,7 @@ $Id: init.lua 5764 2010-03-08 19:05:34Z jow $
m = Map("ahcpd", translate("AHCP Server"), translate("AHCP is an autoconfiguration protocol " ..
"for IPv6 and dual-stack IPv6/IPv4 networks designed to be used in place of router " ..
- "discovery and DHCP on networks where it is difficult or impossible to configure a " ..
+ "discovery or DHCP on networks where it is difficult or impossible to configure a " ..
"server within every link-layer broadcast domain, for example mobile ad-hoc networks."))
diff --git a/applications/luci-firewall/luasrc/model/cbi/firewall/zone-details.lua b/applications/luci-firewall/luasrc/model/cbi/firewall/zone-details.lua
index a3b1a6e..e5bcb34 100644
--- a/applications/luci-firewall/luasrc/model/cbi/firewall/zone-details.lua
+++ b/applications/luci-firewall/luasrc/model/cbi/firewall/zone-details.lua
@@ -50,7 +50,7 @@ s = m:section(NamedSection, zone.sid, "zone",
<em>forward</em> option describes the policy for forwarded traffic \
between different networks within the zone. \
<em>Covered networks</em> specifies which available networks are \
- member of this zone.", zone:name()))
+ members of this zone.", zone:name()))
s.anonymous = true
s.addremove = false
diff --git a/applications/luci-meshwizard/luasrc/model/cbi/freifunk/meshwizard.lua b/applications/luci-meshwizard/luasrc/model/cbi/freifunk/meshwizard.lua
index 8cb0822..68f7a5a 100644
--- a/applications/luci-meshwizard/luasrc/model/cbi/freifunk/meshwizard.lua
+++ b/applications/luci-meshwizard/luasrc/model/cbi/freifunk/meshwizard.lua
@@ -22,7 +22,7 @@ n.anonymous = true
function cbi_configure(device)
local configure = n:taboption(device, Flag, device .. "_config", translate("Configure this interface"),
- translate("Note: this will setup this interface for mesh operation, i.e. add to zone 'freifunk' and enable olsr."))
+ translate("Note: this will set up this interface for mesh operation, i.e. add it to zone 'freifunk' and enable olsr."))
end
function cbi_ip4addr(device)
diff --git a/applications/luci-watchcat/luasrc/model/cbi/watchcat/watchcat.lua b/applications/luci-watchcat/luasrc/model/cbi/watchcat/watchcat.lua
index 9f47bca..bcaf438 100644
--- a/applications/luci-watchcat/luasrc/model/cbi/watchcat/watchcat.lua
+++ b/applications/luci-watchcat/luasrc/model/cbi/watchcat/watchcat.lua
@@ -14,8 +14,8 @@ $Id$
m = Map("system",
translate("Watchcat"),
- translate("Watchcat allows to configure a periodic reboot and/or when " ..
- "internet connection has been lost for a certain period of time."
+ translate("Watchcat allows configuring a periodic reboot when the " ..
+ "Internet connection has been lost for a certain period of time."
))
s = m:section(TypedSection, "watchcat")
@@ -30,8 +30,8 @@ mode:value("allways", "Periodic reboot")
forcedelay = s:option(Value, "forcedelay",
translate("Forced reboot delay"),
- translate("When rebooting the system the watchcat will trigger a soft reboot, " ..
- "Entering a non zero value here, will trigger a delayed hard reboot " ..
+ translate("When rebooting the system, the watchcat will trigger a soft reboot. " ..
+ "Entering a non zero value here will trigger a delayed hard reboot " ..
"if the soft reboot fails. Enter a number of seconds to enable, " ..
"use 0 to disable"))
forcedelay.datatype = "uinteger"
diff --git a/applications/luci-wol/luasrc/model/cbi/wol.lua b/applications/luci-wol/luasrc/model/cbi/wol.lua
index d683b6e..ece9e49 100644
--- a/applications/luci-wol/luasrc/model/cbi/wol.lua
+++ b/applications/luci-wol/luasrc/model/cbi/wol.lua
@@ -28,7 +28,7 @@ s = m:section(SimpleSection)
if has_ewk and has_wol then
bin = s:option(ListValue, "binary", translate("WoL program"),
- translate("Sometimes only one of both tools work. If one of fails, try the other one"))
+ translate("Sometimes only one of the two tools works. If one fails, try the other one"))
bin:value("/usr/bin/etherwake", "Etherwake")
bin:value("/usr/bin/wol", "WoL")
diff --git a/applications/luci-wshaper/luasrc/model/cbi/wshaper.lua b/applications/luci-wshaper/luasrc/model/cbi/wshaper.lua
index 81225ce..faa64f6 100644
--- a/applications/luci-wshaper/luasrc/model/cbi/wshaper.lua
+++ b/applications/luci-wshaper/luasrc/model/cbi/wshaper.lua
@@ -13,7 +13,7 @@ You may obtain a copy of the License at
require("luci.tools.webadmin")
m = Map("wshaper", translate("Wondershaper"),
- translate("Wondershaper uses traffic shaping to ensure low latencies for interactive traffic even when your " ..
+ translate("Wondershaper shapes traffic to ensure low latencies for interactive traffic even when your " ..
"internet connection is highly saturated."))
s = m:section(NamedSection, "settings", "wshaper", translate("Wondershaper settings"))
diff --git a/modules/admin-full/luasrc/controller/admin/system.lua b/modules/admin-full/luasrc/controller/admin/system.lua
index 55ad01c..5fa4c3a 100644
--- a/modules/admin-full/luasrc/controller/admin/system.lua
+++ b/modules/admin-full/luasrc/controller/admin/system.lua
@@ -288,7 +288,7 @@ function action_flashops()
local keep = (luci.http.formvalue("keep") == "1") and "" or "-n"
luci.template.render("admin_system/applyreboot", {
title = luci.i18n.translate("Flashing..."),
- msg = luci.i18n.translate("The system is flashing now.<br /> DO NOT POWER OFF THE DEVICE!<br /> Wait a few minutes until you try to reconnect. It might be necessary to renew the address of your computer to reach the device again, depending on your settings."),
+ msg = luci.i18n.translate("The system is flashing now.<br /> DO NOT POWER OFF THE DEVICE!<br /> Wait a few minutes before you try to reconnect. It might be necessary to renew the address of your computer to reach the device again, depending on your settings."),
addr = (#keep > 0) and "192.168.1.1" or nil
})
fork_exec("killall dropbear uhttpd; sleep 1; /sbin/sysupgrade %s %q" %{ keep, image_tmp })
diff --git a/modules/admin-full/luasrc/model/cbi/admin_network/dhcp.lua b/modules/admin-full/luasrc/model/cbi/admin_network/dhcp.lua
index 5817908..bd6f403 100644
--- a/modules/admin-full/luasrc/model/cbi/admin_network/dhcp.lua
+++ b/modules/admin-full/luasrc/model/cbi/admin_network/dhcp.lua
@@ -86,7 +86,7 @@ s:taboption("advanced", Flag, "localise_queries",
s:taboption("general", Value, "local",
translate("Local server"),
- translate("Local domain specification. Names matching this domain are never forwared and resolved from DHCP or hosts files only"))
+ translate("Local domain specification. Names matching this domain are never forwarded and are resolved from DHCP or hosts files only"))
s:taboption("general", Value, "domain",
translate("Local domain"),
diff --git a/modules/admin-full/luasrc/model/cbi/admin_network/ifaces.lua b/modules/admin-full/luasrc/model/cbi/admin_network/ifaces.lua
index 247ddbf..9be5ff1 100644
--- a/modules/admin-full/luasrc/model/cbi/admin_network/ifaces.lua
+++ b/modules/admin-full/luasrc/model/cbi/admin_network/ifaces.lua
@@ -450,7 +450,7 @@ if has_dnsmasq and net:proto() == "static" then
limit.default = "150"
local ltime = s:taboption("general", Value, "leasetime", translate("Leasetime"),
- translate("Expiry time of leased addresses, minimum is 2 Minutes (<code>2m</code>)."))
+ translate("Expiry time of leased addresses, minimum is 2 minutes (<code>2m</code>)."))
ltime.rmempty = true
ltime.default = "12h"
diff --git a/modules/admin-full/luasrc/model/cbi/admin_network/wifi.lua b/modules/admin-full/luasrc/model/cbi/admin_network/wifi.lua
index 4ae2f77..5a5efa9 100644
--- a/modules/admin-full/luasrc/model/cbi/admin_network/wifi.lua
+++ b/modules/admin-full/luasrc/model/cbi/admin_network/wifi.lua
@@ -22,7 +22,7 @@ arg[1] = arg[1] or ""
m = Map("wireless", "",
translate("The <em>Device Configuration</em> section covers physical settings of the radio " ..
- "hardware such as channel, transmit power or antenna selection which is shared among all " ..
+ "hardware such as channel, transmit power or antenna selection which are shared among all " ..
"defined wireless networks (if the radio hardware is multi-SSID capable). Per network settings " ..
"like encryption or operation mode are grouped in the <em>Interface Configuration</em>."))
diff --git a/modules/admin-full/luasrc/model/cbi/admin_network/wifi_add.lua b/modules/admin-full/luasrc/model/cbi/admin_network/wifi_add.lua
index 5b646d9..cb42648 100644
--- a/modules/admin-full/luasrc/model/cbi/admin_network/wifi_add.lua
+++ b/modules/admin-full/luasrc/model/cbi/admin_network/wifi_add.lua
@@ -60,7 +60,7 @@ if iw and iw.mbssid_support then
function replace.cfgvalue() return "1" end
else
replace = m:field(DummyValue, "replace", translate("Replace wireless configuration"))
- replace.default = translate("The hardware is not multi-SSID capable and existing " ..
+ replace.default = translate("The hardware is not multi-SSID capable and the existing " ..
"configuration will be replaced if you proceed.")
function replace.formvalue() return "1" end
diff --git a/modules/admin-full/luasrc/model/cbi/admin_system/system.lua b/modules/admin-full/luasrc/model/cbi/admin_system/system.lua
index 3a884c4..5e82289 100644
--- a/modules/admin-full/luasrc/model/cbi/admin_system/system.lua
+++ b/modules/admin-full/luasrc/model/cbi/admin_system/system.lua
@@ -183,7 +183,7 @@ if has_ntpd then
x = s:option(Button, "_enable")
x.title = translate("Time Synchronization is not configured yet.")
- x.inputtitle = translate("Setup Time Synchronization")
+ x.inputtitle = translate("Set up Time Synchronization")
x.inputstyle = "apply"
else
diff --git a/modules/admin-full/luasrc/view/admin_network/wifi_overview.htm b/modules/admin-full/luasrc/view/admin_network/wifi_overview.htm
index 97d900d..d528876 100644
--- a/modules/admin-full/luasrc/view/admin_network/wifi_overview.htm
+++ b/modules/admin-full/luasrc/view/admin_network/wifi_overview.htm
@@ -134,7 +134,7 @@ You may obtain a copy of the License at
function wifi_shutdown(id, toggle) {
var reconnect = (toggle.getAttribute('active') == 'false');
- if (!reconnect && !confirm(String.format('<%:Really shutdown network ?\nYou might lose access to this device if you are connected via this interface.%>')))
+ if (!reconnect && !confirm(String.format('<%:Really shut down network?\nYou might lose access to this device if you are connected via this interface.%>')))
return;
is_reconnecting = true;
diff --git a/modules/admin-full/luasrc/view/admin_system/flashops.htm b/modules/admin-full/luasrc/view/admin_system/flashops.htm
index 0ba22a5..debc796 100644
--- a/modules/admin-full/luasrc/view/admin_system/flashops.htm
+++ b/modules/admin-full/luasrc/view/admin_system/flashops.htm
@@ -85,7 +85,7 @@ $Id$
<% end %>
</form>
<% else %>
- <div class="cbi-section-descr"><%:Sorry, there is no sysupgrade support present, a new firmware image must be flashed manually. Please refer to the OpenWrt wiki for device specific install instructions.%></div>
+ <div class="cbi-section-descr"><%:Sorry, there is no sysupgrade support present; a new firmware image must be flashed manually. Please refer to the OpenWrt wiki for device specific install instructions.%></div>
<% end %>
</fieldset>
diff --git a/modules/admin-full/luasrc/view/admin_system/upgrade.htm b/modules/admin-full/luasrc/view/admin_system/upgrade.htm
index 69fde9a..ce28533 100644
--- a/modules/admin-full/luasrc/view/admin_system/upgrade.htm
+++ b/modules/admin-full/luasrc/view/admin_system/upgrade.htm
@@ -24,7 +24,7 @@ $Id$
<% if storage > 0 and size > storage then %>
<br /><br />
- <div class="error"><%:It appears that you try to
+ <div class="error"><%:It appears that you are trying to
flash an image that does not fit into the flash memory, please verify
the image file! %></div>
<% end %>
diff --git a/modules/admin-mini/luasrc/view/mini/upgrade.htm b/modules/admin-mini/luasrc/view/mini/upgrade.htm
index 1083a16..6ff5d84 100644
--- a/modules/admin-mini/luasrc/view/mini/upgrade.htm
+++ b/modules/admin-mini/luasrc/view/mini/upgrade.htm
@@ -59,7 +59,7 @@ $Id$
<% if flashsize > 0 and filesize > flashsize then %>
<br /><br />
- <div class="error"><%:It appears that you try to
+ <div class="error"><%:It appears that you are trying to
flash an image that does not fit into the flash memory, please verify
the image file! %></div>
<% end %>
@@ -95,7 +95,7 @@ $Id$
<% elseif step == 3 then %>
<p><%_ The system is flashing now.<br />
DO NOT POWER OFF THE DEVICE!<br />
- Wait a few minutes until you try to reconnect.
+ Wait a few minutes before you try to reconnect.
It might be necessary to renew the address of your computer to reach the device
again, depending on your settings. %></p>
diff --git a/modules/failsafe/luasrc/controller/failsafe/failsafe.lua b/modules/failsafe/luasrc/controller/failsafe/failsafe.lua
index 1da3438..db4bda6 100644
--- a/modules/failsafe/luasrc/controller/failsafe/failsafe.lua
+++ b/modules/failsafe/luasrc/controller/failsafe/failsafe.lua
@@ -132,7 +132,7 @@ function action_flashops()
local keep = (luci.http.formvalue("keep") == "1") and "" or "-n"
luci.template.render("failsafe/applyreboot", {
title = luci.i18n.translate("Flashing..."),
- msg = luci.i18n.translate("The system is flashing now.<br /> DO NOT POWER OFF THE DEVICE!<br /> Wait a few minutes until you try to reconnect. It might be necessary to renew the address of your computer to reach the device again, depending on your settings."),
+ msg = luci.i18n.translate("The system is flashing now.<br /> DO NOT POWER OFF THE DEVICE!<br /> Wait a few minutes before you try to reconnect. It might be necessary to renew the address of your computer to reach the device again, depending on your settings."),
addr = (#keep > 0) and "192.168.1.1" or nil
})
fork_exec("killall dropbear uhttpd; sleep 1; /sbin/sysupgrade %s %q" %{ keep, image_tmp })
diff --git a/modules/failsafe/luasrc/view/failsafe/flashops.htm b/modules/failsafe/luasrc/view/failsafe/flashops.htm
index accbba0..5ff23e5 100644
--- a/modules/failsafe/luasrc/view/failsafe/flashops.htm
+++ b/modules/failsafe/luasrc/view/failsafe/flashops.htm
@@ -36,7 +36,7 @@ $Id$
<% end %>
</form>
<% else %>
- <div class="cbi-section-descr"><%:Sorry, there is no sysupgrade support present, a new firmware image must be flashed manually. Please refer to the OpenWrt wiki for device specific install instructions.%></div>
+ <div class="cbi-section-descr"><%:Sorry, there is no sysupgrade support present; a new firmware image must be flashed manually. Please refer to the OpenWrt wiki for device specific install instructions.%></div>
<% end %>
</fieldset>
diff --git a/modules/failsafe/luasrc/view/failsafe/upgrade.htm b/modules/failsafe/luasrc/view/failsafe/upgrade.htm
index 66f6457..7a86000 100644
--- a/modules/failsafe/luasrc/view/failsafe/upgrade.htm
+++ b/modules/failsafe/luasrc/view/failsafe/upgrade.htm
@@ -25,7 +25,7 @@ $Id$
<% if storage > 0 and size > storage then %>
<br /><br />
- <div class="error"><%:It appears that you try to
+ <div class="error"><%:It appears that you are trying to
flash an image that does not fit into the flash memory, please verify
the image file! %></div>
<% end %>
--
1.9.1
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list