[OpenWrt-Devel] [RFC] mt7620 wifi

[Roman Yeryomin]

On 1 July 2014 17:49, Xiongfei(Alex) GUO <xfguo at credosemi.com> wrote:
> On Tue, Jul 1, 2014 at 9:51 PM, Roman Yeryomin <leroi.lists at gmail.com> wrote:
>> On 1 July 2014 09:57, Xiongfei(Alex) GUO <xfguo at credosemi.com> wrote:
>>> hi, Roman,
>>>
>>> simply try these commands in OpenWrt, then the ethernet will start to work.
>>>
>>>     uci set network. at switch_vlan[0].vid=1
>>>     uci set network. at switch_vlan[1].vid=2
>>>     uci commit
>>>     /etc/init.d/network restart
>>
>> That helped, indeed!
>> But how come changing the vid via swconfig directly doesn't have any effect?
>> For example:
>>
>> root at OpenWrt:/# swconfig dev switch0 vlan 1 show
>> VLAN 1:
>>         vid: 1
>>         ports: 1 2 3 4 6t
>> root at OpenWrt:/# swconfig dev switch0 vlan 1 set vid 5
>> root at OpenWrt:/# swconfig dev switch0 vlan 1 show
>> VLAN 1:
>>         vid: 1
>>         ports: 1 2 3 4 6t
>>
>> Because this is what I saw - the vid was 0 and I tried to set it via
>> swconfig which didn't help.
>> To me it still looks that something is broken if I cannot change vid
>> (pvid or other vlan configuration) via swconfig.
>>
> one more step,
>
>     $ swconfig dev switch0 set apply 1
>

yes, I already figured it out (it wasn't obvious at all) - see the
post in your patch thread.


Regards,
Roman
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel