[OpenWrt-Devel] Regarding USB and the Dlink DIR-600 Bx

[John Crispin]

On 05/08/2014 07:06, Luis E. Garcia wrote:
> Good evening, I just tried the BB RC2 build for this router and it
> seems the image is much larger than the one for AA. Checking the
> installed kernel modules I found the kmod-usb-core and an other
> related module. Is it possible to eliminate these modules for this
> router ( and probably for the DIR-300 Bx ) since enabling the USB
> support on them is near to imposible ( unless you can hack ball
> grid joints from the logic board).
> 
> Since they're build using the ralink generic target - would I need
> to create a separate router file for these devices in order to
> avoid ruining other working devices that do nees USB support? The
> resulting image without USB support is 0.7 MB smaller and allow
> other ( more useful or better suited) packages to be installed.
> 
> Regards, Luis Garcia

Hi,

some of the RC2 images are to big as i started the IB incorrectly.

RC3 is building just now and will be ready shortly. please retest with
those images when they are online

	John


> 
> 
> _______________________________________________ openwrt-devel
> mailing list openwrt-devel at lists.openwrt.org 
> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
> 
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel