[FS#4224] R4s refresh the latest firmware, the uplink speed is only 2Mbps

[OpenWrt Bugs]

THIS IS AN AUTOMATED MESSAGE, DO NOT REPLY.

A new Flyspray task has been opened.  Details are below. 

User who did this - f4nff (f4nff) 

Attached to Project - OpenWrt/LEDE Project
Summary - R4s refresh the latest firmware, the uplink speed is only 2Mbps
Task Type - Bug Report
Category - Base system
Status - Unconfirmed
Assigned To - 
Operating System - All
Severity - High
Priority - Very Low
Reported Version - All
Due in Version - Undecided
Due Date - Undecided
Details - Device name: r4s
Firmware download: https://downloads.openwrt.org/snapshots/targets/rockchip/armv8/openwrt-rockchip-armv8-friendlyarm_nanopi-r4s-ext4-sysupgrade.img.gz

Problem description: Using iperf3 test the uplink speed is only 1-3Mbps, but using https://github.com/DHDAXCW/NanoPi-R4S/releases 2 can run the full bandwidth.


 

More information can be found at the following URL:
https://bugs.openwrt.org/index.php?do=details&task_id=4224

You are receiving this message because you have requested it from the Flyspray bugtracking system.  If you did not expect this message or don't want to receive mails in future, you can change your notification settings at the URL shown above.