[FS#4223] Upgrade from ar71xx to ath79 fails on NETGEAR WNDR4300 (v1) (Attachment added)

[OpenWrt Bugs]

THIS IS AN AUTOMATED MESSAGE, DO NOT REPLY.

A new Flyspray task has been opened.  Details are below. 

User who did this - metayan (metayan) 

Attached to Project - OpenWrt/LEDE Project
Summary - Upgrade from ar71xx to ath79 fails on NETGEAR WNDR4300 (v1)
Task Type - Bug Report
Category - Base system
Status - Unconfirmed
Assigned To - 
Operating System - All
Severity - Low
Priority - Very Low
Reported Version - openwrt-21.02
Due in Version - Undecided
Due Date - Undecided
Details - Reporting according to
[[https://openwrt.org/docs/guide-user/installation/ar71xx.to.ath79|https://openwrt.org/docs/guide-user/installation/ar71xx.to.ath79]]

because from what I gather, that is probably the cause for the upgrade failure.

Model NETGEAR WNDR4300
Architecture Atheros AR9344 rev 2
Firmware Version OpenWrt 19.07.3 r11063-85e04e9f46 / LuCI openwrt-19.07 branch git-21.357.58233-6f349c9

sysupgrade -n openwrt-21.02.1-ath79-nand-netgear_wndr4300-squashfs-sysupgrade.bin

fails with

Device wndr4300 not supported by this image
Supported devices: netgear,wndr4300
Invalid sysupgrade file.
Image check failed.

Image downloaded from
https://downloads.openwrt.org/releases/21.02.1/targets/ath79/nand/openwrt-21.02.1-ath79-nand-netgear_wndr4300-squashfs-sysupgrade.bin

Checked
https://openwrt.org/docs/techref/targets/ar71xx-ath79


Also tried the SNAPSHOT from
https://downloads.openwrt.org/snapshots/targets/ath79/nand/openwrt-ath79-nand-netgear_wndr4300-squashfs-sysupgrade.bin


sysupgrade -T openwrt-ath79-nand-netgear_wndr4300-squashfs-sysupgrade.bin


Device wndr4300 not supported by this image
Supported devices: netgear,wndr4300
Invalid sysupgrade file.
Image check failed.


dmesg output attached.

And last, but not least, **thanks for this excellent project**.
/Yan

One or more files have been attached.

More information can be found at the following URL:
https://bugs.openwrt.org/index.php?do=details&task_id=4223

You are receiving this message because you have requested it from the Flyspray bugtracking system.  If you did not expect this message or don't want to receive mails in future, you can change your notification settings at the URL shown above.