[FS#3988] urlader partition no longer available on Fritzbox 7362 SL - wireless broken due to missing caldata

[OpenWrt Bugs]

THIS IS AN AUTOMATED MESSAGE, DO NOT REPLY.

The following task has a new comment added:

FS#3988 - urlader partition no longer available on Fritzbox 7362 SL - wireless  broken due to missing caldata
User who did this - Jan Hoffmann (janhoffmann)

----------
Testing has confirmed that this issue is caused by commit adb3e46616c6 ("lantiq: convert mtd-mac-address to nvmem for Fritz!Box 736x").

Here is the relevant part of the kernel log without this commit (this shows the "urlader" partition being accessible):


[   11.173721] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xf1
[   11.178657] nand: Micron MT29F1G08ABADAWP
[   11.182670] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[   11.194097] Scanning device for bad blocks
[   11.271593] 2 fixed-partitions partitions found on MTD device 14000000.flash
[   11.277198] Creating 2 MTD partitions on "14000000.flash":
[   11.282787] 0x000000000000-0x000000400000 : "kernel"
[   11.289025] 0x000000400000-0x000008000000 : "ubi"
[   11.302615] spi-lantiq-ssc 1e100800.spi: Lantiq SSC SPI controller (Rev 8, TXFS 8, RXFS 8, DMA 1)
[   11.313868] spi-nor spi0.4: s25fl008k (1024 Kbytes)
[   11.317380] 3 fixed-partitions partitions found on MTD device spi0.4
[   11.323775] Creating 3 MTD partitions on "spi0.4":
[   11.328466] 0x000000000000-0x000000040000 : "urlader"
[   11.335018] 0x000000040000-0x0000000a0000 : "tffs (1)"
[   11.340288] 0x0000000a0000-0x000000100000 : "tffs (2)"
...
[   29.768174] ath9k 0000:01:00.0: enabling device (0000 -> 0002)
[   29.775022] ath9k 0000:01:00.0: Direct firmware load for ath9k-eeprom-pci-0000:01:00.0.bin failed with error -2
[   29.784199] ath9k 0000:01:00.0: Falling back to sysfs fallback for: ath9k-eeprom-pci-0000:01:00.0.bin
[   30.477200] ath: EEPROM regdomain: 0x8114
[   30.477229] ath: EEPROM indicates we should expect a country code
[   30.477247] ath: doing EEPROM country->regdmn map search
[   30.477263] ath: country maps to regdmn code: 0x37
[   30.477280] ath: Country alpha2 being used: DE
[   30.477293] ath: Regpair used: 0x37
[   30.493176] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   30.498037] ieee80211 phy0: Atheros AR9300 Rev:3 mem=0xbc000000, irq=144

----------

More information can be found at the following URL:
https://bugs.openwrt.org/index.php?do=details&task_id=3988#comment10130

You are receiving this message because you have requested it from the Flyspray bugtracking system.  If you did not expect this message or don't want to receive mails in future, you can change your notification settings at the URL shown above.