[FS#3615] Kirkwood: the build stops for input when make with V=s or V=sc

[OpenWrt Bugs]

THIS IS AN AUTOMATED MESSAGE, DO NOT REPLY.

A new Flyspray task has been opened.  Details are below. 

User who did this - builker (builker) 

Attached to Project - OpenWrt/LEDE Project
Summary - Kirkwood: the build stops for input when make with V=s or V=sc
Task Type - Build Failure
Category - Kernel
Status - Unconfirmed
Assigned To - 
Operating System - All
Severity - Medium
Priority - Very Low
Reported Version - Trunk
Due in Version - Undecided
Due Date - Undecided
Details - When building Kirkwood images off the trunk, r15696-17fa01bb79, make -j1 V=s or make -j1 V=sc stops. A  can get it going. Without V=s or V=sc, the build doesn't stop for input. Please find the make.log below.

make[5]: Entering directory '/home/builder/openwrt/build_dir/target-arm_xscale_musl_eabi/linux-kirkwood/linux-5.4.95'
Makefile:632: include/config/auto.conf: No such file or directory
Makefile:678: include/config/auto.conf.cmd: No such file or directory
make -f ./Makefile syncconfig
make -f ./scripts/Makefile.build obj=scripts/basic
rm -f .tmp_quiet_recordmcount
make -f ./scripts/Makefile.build obj=scripts/kconfig syncconfig
  gcc -Wp,-MD,scripts/kconfig/.conf.o.d -Wall -Wmissing-prototypes -Wstrict-prototypes -O2 -fomit-frame-pointer -std=gnu89  -O2 -I/home/builder/openwrt/staging_dir/host/include  -Wall -Wmissing-prototypes -Wstrict-prototypes   -I/home/builder/openwrt/staging_dir/host/include  -c -o scripts/kconfig/conf.o scripts/kconfig/conf.c
  gcc -Wp,-MD,scripts/kconfig/.confdata.o.d -Wall -Wmissing-prototypes -Wstrict-prototypes -O2 -fomit-frame-pointer -std=gnu89  -O2 -I/home/builder/openwrt/staging_dir/host/include  -Wall -Wmissing-prototypes -Wstrict-prototypes   -I/home/builder/openwrt/staging_dir/host/include  -c -o scripts/kconfig/confdata.o scripts/kconfig/confdata.c
  gcc -Wp,-MD,scripts/kconfig/.expr.o.d -Wall -Wmissing-prototypes -Wstrict-prototypes -O2 -fomit-frame-pointer -std=gnu89  -O2 -I/home/builder/openwrt/staging_dir/host/include  -Wall -Wmissing-prototypes -Wstrict-prototypes   -I/home/builder/openwrt/staging_dir/host/include  -c -o scripts/kconfig/expr.o scripts/kconfig/expr.c
  flex -oscripts/kconfig/lexer.lex.c -L scripts/kconfig/lexer.l
  bison -o scripts/kconfig/parser.tab.c --defines=scripts/kconfig/parser.tab.h -t -l scripts/kconfig/parser.y
  gcc -Wp,-MD,scripts/kconfig/.lexer.lex.o.d -Wall -Wmissing-prototypes -Wstrict-prototypes -O2 -fomit-frame-pointer -std=gnu89  -O2 -I/home/builder/openwrt/staging_dir/host/include  -Wall -Wmissing-prototypes -Wstrict-prototypes   -I/home/builder/openwrt/staging_dir/host/include -I ./scripts/kconfig -c -o scripts/kconfig/lexer.lex.o scripts/kconfig/lexer.lex.c
  gcc -Wp,-MD,scripts/kconfig/.parser.tab.o.d -Wall -Wmissing-prototypes -Wstrict-prototypes -O2 -fomit-frame-pointer -std=gnu89  -O2 -I/home/builder/openwrt/staging_dir/host/include  -Wall -Wmissing-prototypes -Wstrict-prototypes   -I/home/builder/openwrt/staging_dir/host/include -I ./scripts/kconfig -c -o scripts/kconfig/parser.tab.o scripts/kconfig/parser.tab.c
  gcc -Wp,-MD,scripts/kconfig/.preprocess.o.d -Wall -Wmissing-prototypes -Wstrict-prototypes -O2 -fomit-frame-pointer -std=gnu89  -O2 -I/home/builder/openwrt/staging_dir/host/include  -Wall -Wmissing-prototypes -Wstrict-prototypes   -I/home/builder/openwrt/staging_dir/host/include  -c -o scripts/kconfig/preprocess.o scripts/kconfig/preprocess.c
  gcc -Wp,-MD,scripts/kconfig/.symbol.o.d -Wall -Wmissing-prototypes -Wstrict-prototypes -O2 -fomit-frame-pointer -std=gnu89  -O2 -I/home/builder/openwrt/staging_dir/host/include  -Wall -Wmissing-prototypes -Wstrict-prototypes   -I/home/builder/openwrt/staging_dir/host/include  -c -o scripts/kconfig/symbol.o scripts/kconfig/symbol.c
  gcc   -o scripts/kconfig/conf scripts/kconfig/conf.o scripts/kconfig/confdata.o scripts/kconfig/expr.o scripts/kconfig/lexer.lex.o scripts/kconfig/parser.tab.o scripts/kconfig/preprocess.o scripts/kconfig/symbol.o -L/home/builder/openwrt/staging_dir/host/lib 
scripts/kconfig/conf  --syncconfig Kconfig
net/sched/Kconfig:45: warning: menuconfig statement without prompt
*
* Restart config...
*
*
* I2C Hardware Bus support
*
*
* PC SMBus host controller drivers
*
ALI 1535 (I2C_ALI1535) [N/m/y/?] n
ALI 1563 (I2C_ALI1563) [N/m/y/?] n
ALI 15x3 (I2C_ALI15X3) [N/m/y/?] n
AMD 756/766/768/8111 and nVidia nForce (I2C_AMD756) [N/m/y/?] n
AMD 8111 (I2C_AMD8111) [N/m/y/?] n
Intel 82801 (ICH/PCH) (I2C_I801) [N/m/y/?] n
Intel SCH SMBus 1.0 (I2C_ISCH) [N/m/y/?] n
Intel PIIX4 and compatible (ATI/AMD/Serverworks/Broadcom/SMSC) (I2C_PIIX4) [N/m/y/?] n
Nvidia nForce2, nForce3 and nForce4 (I2C_NFORCE2) [N/m/y/?] n
NVIDIA GPU I2C controller (I2C_NVIDIA_GPU) [N/m/y/?] n
SiS 5595 (I2C_SIS5595) [N/m/y/?] n
SiS 630/730/964 (I2C_SIS630) [N/m/y/?] n
SiS 96x (I2C_SIS96X) [N/m/y/?] n
VIA VT82C586B (I2C_VIA) [N/m/y/?] n
VIA VT82C596/82C686/82xx and CX700/VX8xx/VX900 (I2C_VIAPRO) [N/m/y/?] n
*
* I2C system bus drivers (mostly embedded / system-on-chip)
*
CBUS I2C driver (I2C_CBUS_GPIO) [N/m/y/?] n
Synopsys DesignWare Platform (I2C_DESIGNWARE_PLATFORM) [N/m/y/?] n
Synopsys DesignWare PCI (I2C_DESIGNWARE_PCI) [N/m/y/?] n
EMMA Mobile series I2C adapter (I2C_EMEV2) [N/m/y/?] n
GPIO-based bitbanging I2C (I2C_GPIO) [M/n/y/?] m
  GPIO-based fault injector (I2C_GPIO_FAULT_INJECTOR) [N/y/?] n
Marvell mv64xxx I2C Controller (I2C_MV64XXX) [Y/n/m/?] y
OpenCores I2C Controller (I2C_OCORES) [N/m/y/?] n
PCA9564/PCA9665 as platform device (I2C_PCA_PLATFORM) [N/m/y/?] n
Intel PXA2XX I2C adapter (I2C_PXA) [M/n/y/?] m
Intel PXA2XX I2C Slave comms support (I2C_PXA_SLAVE) [N/y/?] (NEW) 


More information can be found at the following URL:
https://bugs.openwrt.org/index.php?do=details&task_id=3615

You are receiving this message because you have requested it from the Flyspray bugtracking system.  If you did not expect this message or don't want to receive mails in future, you can change your notification settings at the URL shown above.