[FS#3515] pcduino3 ethernet can't work

[OpenWrt Bugs]

THIS IS AN AUTOMATED MESSAGE, DO NOT REPLY.

A new Flyspray task has been opened.  Details are below. 

User who did this - fsdg fgergfdsd (letli) 

Attached to Project - OpenWrt/LEDE Project
Summary - pcduino3 ethernet can't work
Task Type - Bug Report
Category - Kernel
Status - Unconfirmed
Assigned To - 
Operating System - All
Severity - Medium
Priority - Very Low
Reported Version - openwrt-19.07
Due in Version - Undecided
Due Date - Undecided
Details - Supply the following if possible:
 - Device problem occurs on **pcduino3 nano**
 - Software versions of OpenWrt/LEDE release, packages, etc. **openwrt-19.07.5-sunxi-cortexa7-sun7i-a20-pcduino3-squashfs-sdcard.img**
 - Steps to reproduce **dd to tf card, insert and boot**

boot message
 [    3.489541] sun7i-dwmac 1c50000.ethernet: Failed to reset the dma
[    3.495647] sun7i-dwmac 1c50000.ethernet eth0: stmmac_hw_setup: DMA engine initialization failed
[    3.504445] sun7i-dwmac 1c50000.ethernet eth0: stmmac_open: Hw setup failed


More information can be found at the following URL:
https://bugs.openwrt.org/index.php?do=details&task_id=3515

You are receiving this message because you have requested it from the Flyspray bugtracking system.  If you did not expect this message or don't want to receive mails in future, you can change your notification settings at the URL shown above.