[PATCH] base-files: stage2: stop Wi-Fi service on firmware upgrade
Florian Eckert
fe at dev.tdt.de
Fri Nov 14 01:13:04 PST 2025
Hello Jonas,
On 2025-11-13 13:03, Jonas Lochmann wrote:
> Am Thu, Nov 13, 2025 at 10:24:04AM +0100, schrieb Florian Eckert:
>> On 2025-11-13 10:04, Thibaut wrote:
>> > IMHO hostapd should be fixed instead.
>>
>> Of course, that would be the best solution, but currently it is a
>> problem and I do not believe that the problem will be found quickly.
>>
>> I don't know where to start in hostpad. It may also depend on drivers
>> (ath10k, ath11k, ...) and Wi-Fi firmware?
>
> This sounds interesting. Where (at which hardware) does the issue
> occur?
I have encountered this on my openwrt-23.05 target with the following
setup.
Hardware:
0007:01:00.0 Network controller: Qualcomm Technologies, Inc QCNFA765
Wireless Network Adapter (rev 01)
Software:
ath11k-firmware-wcn6855 - 20230804-1
kmod-ath11k - 5.15.189-6.1.145-1-1
kmod-ath11k-pci - 5.15.189-6.1.145-1-1
hostapd-common - 2023-09-08-e5ccbfc6-8
hostapd-utils - 2023-09-08-e5ccbfc6-8
Unfortunately, I cannot test my setup on an openwrt-24.10/master branch
because the router is not supported there.I will test WLAN-Modul in
another router running openwrt-24.10 when I have time or check if the
error is also presented with an other WLAN-Modul.
Best Regards
Florian
More information about the openwrt-devel
mailing list