[PATCH V2 1/3] uboot-mediatek: add support for GatoNetworks GDSP
Enrico Mioso
mrkiko.rs at gmail.com
Sat Nov 9 13:14:31 PST 2024
The GatoNetworks GDSP is a re-branded version of the R5000 5G Industrial
router from Yinghua Technologies.
Advantages over stock bootloader:
1. supports serving the external GPIO WDT, allowing for easier work in U-Boot
shell
2. supports cool features like netconsole, easy recovery, scripting and so on
3. allows using FIT image and image integrity validation
and ultimately gives you much more flexibility to implement your tweaks.
Known issues
------------
To make it easier to operate the device, console I/O multiplexing support has
been enabled in U-Boot configuration. Setting I/O related U-Boot environment
variables to something like "serial,nc" will have the desired effect. Still,
setting these variables to such a value in the persistent environment will
lead to a crash and make it impossible to boot the system or recover it. I
decided to leave it on anyway since I think it can be very practical in
development.
Signed-off-by: Enrico Mioso <mrkiko.rs at gmail.com>
---
package/boot/uboot-mediatek/Makefile | 14 +
...ialized-the-watchdog-subsystem-later.patch | 59 +++
.../patches/458-add-GatoNetworks-GDSP.patch | 418 ++++++++++++++++++
3 files changed, 491 insertions(+)
create mode 100644 package/boot/uboot-mediatek/patches/457-initialized-the-watchdog-subsystem-later.patch
create mode 100644 package/boot/uboot-mediatek/patches/458-add-GatoNetworks-GDSP.patch
diff --git a/package/boot/uboot-mediatek/Makefile b/package/boot/uboot-mediatek/Makefile
index 3485765368..d2a03277d4 100644
--- a/package/boot/uboot-mediatek/Makefile
+++ b/package/boot/uboot-mediatek/Makefile
@@ -364,6 +364,19 @@ define U-Boot/mt7981_rfb-emmc
DEPENDS:=+trusted-firmware-a-mt7981-emmc-ddr3
endef
+define U-Boot/mt7981_gatonetworks_gdsp
+ NAME:=GatoNetworks GDSP
+ BUILD_SUBTARGET:=filogic
+ BUILD_DEVICES:=gatonetworks_gdsp
+ UBOOT_CONFIG:=mt7981_gatonetworks_gdsp
+ UBOOT_IMAGE:=u-boot.fip
+ BL2_BOOTDEV:=nor
+ BL2_SOC:=mt7981
+ BL2_DDRTYPE:=ddr3
+ DEPENDS:=+trusted-firmware-a-mt7981-nor-ddr3
+ FIP_COMPRESS:=1
+endef
+
define U-Boot/mt7981_rfb-nor
NAME:=MT7981 Reference Board
BUILD_SUBTARGET:=filogic
@@ -797,6 +810,7 @@ UBOOT_TARGETS := \
mt7981_abt_asr3000 \
mt7981_cmcc_rax3000m-emmc \
mt7981_cmcc_rax3000m-nand \
+ mt7981_gatonetworks_gdsp \
mt7981_glinet_gl-x3000 \
mt7981_glinet_gl-xe3000 \
mt7981_h3c_magic-nx30-pro \
diff --git a/package/boot/uboot-mediatek/patches/457-initialized-the-watchdog-subsystem-later.patch b/package/boot/uboot-mediatek/patches/457-initialized-the-watchdog-subsystem-later.patch
new file mode 100644
index 0000000000..652452c1dd
--- /dev/null
+++ b/package/boot/uboot-mediatek/patches/457-initialized-the-watchdog-subsystem-later.patch
@@ -0,0 +1,59 @@
+From 9c1ad8a18ac1a20aee7a617964bcae3e90dac700 Mon Sep 17 00:00:00 2001
+From: Enrico Mioso <mrkiko.rs at gmail.com>
+Date: Wed, 23 Oct 2024 17:46:35 +0200
+Subject: [PATCH] uboot-mediatek: initialized the watchdog subsystem later
+
+Initialize the watchdog subsystem later during initialization, to allow for
+the gpio-wdt driver to work.
+
+Signed-off-by: Enrico Mioso <mrkiko.rs at gmail.com>
+---
+ common/board_r.c | 11 ++++-------
+ 1 file changed, 4 insertions(+), 7 deletions(-)
+
+diff --git a/common/board_r.c b/common/board_r.c
+index e6eab553e5..d5fe9a0d43 100644
+--- a/common/board_r.c
++++ b/common/board_r.c
+@@ -651,19 +651,13 @@ static init_fnc_t init_sequence_r[] = {
+ serial_initialize,
+ initr_announce,
+ dm_announce,
+-#if CONFIG_IS_ENABLED(WDT)
+- initr_watchdog,
+-#endif
+- INIT_FUNC_WATCHDOG_RESET
+ arch_initr_trap,
+ #if defined(CONFIG_BOARD_EARLY_INIT_R)
+ board_early_init_r,
+ #endif
+- INIT_FUNC_WATCHDOG_RESET
+ #ifdef CONFIG_POST
+ post_output_backlog,
+ #endif
+- INIT_FUNC_WATCHDOG_RESET
+ #if defined(CONFIG_PCI_INIT_R) && defined(CONFIG_SYS_EARLY_PCI_INIT)
+ /*
+ * Do early PCI configuration _before_ the flash gets initialised,
+@@ -678,7 +672,6 @@ static init_fnc_t init_sequence_r[] = {
+ #ifdef CONFIG_MTD_NOR_FLASH
+ initr_flash,
+ #endif
+- INIT_FUNC_WATCHDOG_RESET
+ #if defined(CONFIG_PPC) || defined(CONFIG_M68K) || defined(CONFIG_X86)
+ /* initialize higher level parts of CPU like time base and timers */
+ cpu_init_r,
+@@ -707,6 +700,10 @@ static init_fnc_t init_sequence_r[] = {
+ #ifdef CONFIG_PVBLOCK
+ initr_pvblock,
+ #endif
++#if CONFIG_IS_ENABLED(WDT)
++ initr_watchdog,
++#endif
++ INIT_FUNC_WATCHDOG_RESET
+ initr_env,
+ #ifdef CONFIG_SYS_MALLOC_BOOTPARAMS
+ initr_malloc_bootparams,
+--
+2.46.2
+
diff --git a/package/boot/uboot-mediatek/patches/458-add-GatoNetworks-GDSP.patch b/package/boot/uboot-mediatek/patches/458-add-GatoNetworks-GDSP.patch
new file mode 100644
index 0000000000..da53d741a7
--- /dev/null
+++ b/package/boot/uboot-mediatek/patches/458-add-GatoNetworks-GDSP.patch
@@ -0,0 +1,418 @@
+From 57d0f608d925cb688b5c9b71512fca7d228f07f6 Mon Sep 17 00:00:00 2001
+From: Enrico Mioso <mrkiko.rs at gmail.com>
+Date: Wed, 23 Oct 2024 20:39:28 +0200
+Subject: [PATCH] add GatoNetworks GDSP
+
+Signed-off-by: Enrico Mioso <mrkiko.rs at gmail.com>
+---
+ arch/arm/dts/mt7981-gatonetworks_gdsp.dts | 200 +++++++++++++++++++++
+ configs/mt7981_gatonetworks_gdsp_defconfig | 144 +++++++++++++++
+ gatonetworks_gdsp_env | 38 ++++
+ 3 files changed, 382 insertions(+)
+ create mode 100644 arch/arm/dts/mt7981-gatonetworks_gdsp.dts
+ create mode 100644 configs/mt7981_gatonetworks_gdsp_defconfig
+ create mode 100644 gatonetworks_gdsp_env
+
+diff --git a/arch/arm/dts/mt7981-gatonetworks_gdsp.dts b/arch/arm/dts/mt7981-gatonetworks_gdsp.dts
+new file mode 100644
+index 0000000000..8cb5547943
+--- /dev/null
++++ b/arch/arm/dts/mt7981-gatonetworks_gdsp.dts
+@@ -0,0 +1,200 @@
++// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
++
++/dts-v1/;
++#include "mt7981.dtsi"
++#include <dt-bindings/gpio/gpio.h>
++#include <dt-bindings/input/linux-event-codes.h>
++
++/ {
++ #address-cells = <1>;
++ #size-cells = <1>;
++ model = "GatoNetworks GDSP";
++ compatible = "gatonetworks,gdsp", "mediatek,mt7981";
++ chosen {
++ stdout-path = &uart0;
++ tick-timer = &timer0;
++ };
++
++ memory {
++ device_type = "memory";
++ reg = <0x40000000 0x10000000>;
++ };
++
++ keys {
++ compatible = "gpio-keys";
++
++ reset {
++ label = "reset";
++ linux,code = <KEY_RESTART>;
++ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
++ };
++ };
++
++ leds {
++ compatible = "gpio-leds";
++
++ sim1 {
++ label = "sim1";
++ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
++ };
++
++ sim2 {
++ label = "sim2";
++ gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
++ };
++
++ sg1 {
++ label = "sg1";
++ gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
++ };
++
++ sg2 {
++ label = "sg2";
++ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
++ };
++
++ sg3 {
++ label = "sg3";
++ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
++ };
++
++ sg4 {
++ label = "sg4";
++ gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
++ };
++
++ sg5 {
++ label = "sg5";
++ gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
++ };
++
++ sg6 {
++ label = "sg6";
++ gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
++ };
++ };
++ gpio-watchdog {
++ compatible = "linux,wdt-gpio";
++ gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
++ hw_algo = "toggle";
++ hw_margin_ms = <25000>;
++ always-running;
++ u-boot,autostart;
++ };
++};
++
++ð {
++ status = "okay";
++ mediatek,gmac-id = <0>;
++ phy-mode = "2500base-x";
++ mediatek,switch = "mt7531";
++ reset-gpios = <&gpio 39 GPIO_ACTIVE_HIGH>;
++
++ fixed-link {
++ speed = <2500>;
++ full-duplex;
++ };
++};
++
++&spi2 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&spi2_flash_pins>;
++ status = "okay";
++ must_tx;
++ enhance_timing;
++ dma_ext;
++ ipm_design;
++ support_quad;
++ tick_dly = <2>;
++ sample_sel = <0>;
++
++ flash at 0 {
++ compatible = "jedec,spi-nor";
++ reg = <0>;
++ spi-max-frequency = <52000000>;
++
++ partitions {
++ compatible = "fixed-partitions";
++ #address-cells = <1>;
++ #size-cells = <1>;
++
++ partition at 00000 {
++ label = "BL2";
++ reg = <0x00000 0x0040000>;
++ read-only;
++ };
++
++ partition at 40000 {
++ label = "u-boot-env";
++ reg = <0x40000 0x0010000>;
++ };
++
++ partition at 50000 {
++ label = "Factory";
++ reg = <0x50000 0x00B0000>;
++ read-only;
++ };
++
++ partition at 100000 {
++ label = "FIP";
++ reg = <0x100000 0x0080000>;
++ };
++
++ partition at 180000 {
++ label = "firmware";
++ reg = <0x180000 0x1E80000>;
++ };
++ };
++ };
++};
++
++&pinctrl {
++ uart1_pins: uart1-pins {
++ mux {
++ function = "uart";
++ groups = "uart1_0";
++ };
++ };
++
++ uart2_pins: uart2-pins {
++ mux {
++ function = "uart";
++ groups = "uart2_0_tx_rx";
++ };
++ };
++
++ spi2_flash_pins: spi2-pins {
++ mux {
++ function = "spi";
++ groups = "spi2", "spi2_wp_hold";
++ };
++
++ conf-pu {
++ pins = "SPI2_CS", "SPI2_HOLD", "SPI2_WP";
++ drive-strength = <MTK_DRIVE_8mA>;
++ bias-pull-up = <MTK_PUPD_SET_R1R0_11>;
++ };
++
++ conf-pd {
++ pins = "SPI2_CLK", "SPI2_MOSI", "SPI2_MISO";
++ drive-strength = <MTK_DRIVE_8mA>;
++ bias-pull-down = <MTK_PUPD_SET_R1R0_11>;
++ };
++ };
++};
++
++&uart0 {
++ status = "okay";
++};
++
++&uart1 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&uart1_pins>;
++ status = "okay";
++};
++
++&uart2 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&uart2_pins>;
++ status = "okay";
++};
+diff --git a/configs/mt7981_gatonetworks_gdsp_defconfig b/configs/mt7981_gatonetworks_gdsp_defconfig
+new file mode 100644
+index 0000000000..f357e5b327
+--- /dev/null
++++ b/configs/mt7981_gatonetworks_gdsp_defconfig
+@@ -0,0 +1,144 @@
++CONFIG_ARM=y
++CONFIG_SYS_HAS_NONCACHED_MEMORY=y
++CONFIG_POSITION_INDEPENDENT=y
++CONFIG_ARCH_MEDIATEK=y
++CONFIG_TEXT_BASE=0x41e00000
++CONFIG_SYS_MALLOC_F_LEN=0x4000
++CONFIG_NR_DRAM_BANKS=1
++CONFIG_ENV_SIZE=0x10000
++CONFIG_ENV_OFFSET=0x0
++CONFIG_DEFAULT_DEVICE_TREE="mt7981-gatonetworks_gdsp"
++CONFIG_OF_LIBFDT_OVERLAY=y
++CONFIG_TARGET_MT7981=y
++CONFIG_WATCHDOG_TIMEOUT_MSECS=25000
++CONFIG_DEBUG_UART_BASE=0x11002000
++CONFIG_DEBUG_UART_CLOCK=40000000
++CONFIG_SYS_LOAD_ADDR=0x46000000
++CONFIG_DEBUG_UART=y
++CONFIG_FIT=y
++CONFIG_SPI_BOOT=y
++CONFIG_AUTOBOOT_MENU_SHOW=y
++CONFIG_USE_PREBOOT=y
++CONFIG_DEFAULT_FDT_FILE="mt7981-gatonetworks_gdsp"
++CONFIG_SYS_CBSIZE=512
++CONFIG_SYS_PBSIZE=1049
++CONFIG_LOGLEVEL=7
++CONFIG_CONSOLE_MUX=y
++CONFIG_LOG=y
++CONFIG_BOARD_LATE_INIT=y
++CONFIG_HUSH_PARSER=y
++CONFIG_SYS_PROMPT="GDSP> "
++CONFIG_SYS_MAXARGS=16
++CONFIG_CMD_BDINFO_EXTRA=y
++CONFIG_CMD_CPU=y
++CONFIG_CMD_HISTORY=y
++CONFIG_CMD_LICENSE=y
++# CONFIG_BOOTM_NETBSD is not set
++# CONFIG_BOOTM_PLAN9 is not set
++# CONFIG_BOOTM_RTEMS is not set
++# CONFIG_BOOTM_VXWORKS is not set
++# CONFIG_CMD_BOOTEFI_BOOTMGR is not set
++CONFIG_CMD_BOOTMENU=y
++CONFIG_CMD_ASKENV=y
++CONFIG_CMD_ERASEENV=y
++CONFIG_CMD_ENV_CALLBACK=y
++CONFIG_CMD_ENV_FLAGS=y
++CONFIG_CRC32_VERIFY=y
++CONFIG_LOOPW=y
++CONFIG_CMD_MEMINFO=y
++CONFIG_CMD_MEMTEST=y
++CONFIG_CMD_STRINGS=y
++# CONFIG_CMD_UNLZ4 is not set
++# CONFIG_CMD_UNZIP is not set
++CONFIG_CMD_DM=y
++CONFIG_CMD_GPIO=y
++CONFIG_CMD_GPIO_READ=y
++CONFIG_CMD_PWM=y
++CONFIG_CMD_MTD=y
++# CONFIG_CMD_NAND_EXT is not set
++CONFIG_CMD_SF_TEST=y
++CONFIG_CMD_CAT=y
++CONFIG_CMD_SETEXPR_FMT=y
++CONFIG_CMD_XXD=y
++CONFIG_CMD_DHCP=y
++CONFIG_CMD_TFTPPUT=y
++CONFIG_CMD_TFTPSRV=y
++CONFIG_CMD_RARP=y
++CONFIG_CMD_PING=y
++CONFIG_CMD_CDP=y
++CONFIG_CMD_SNTP=y
++CONFIG_CMD_DNS=y
++CONFIG_CMD_LINK_LOCAL=y
++CONFIG_CMD_PXE=y
++CONFIG_CMD_CACHE=y
++# CONFIG_CMD_EFICONFIG is not set
++CONFIG_CMD_PSTORE=y
++CONFIG_CMD_PSTORE_MEM_ADDR=0x42ff0000
++CONFIG_CMD_UUID=y
++CONFIG_CMD_HASH=y
++CONFIG_CMD_SMC=y
++CONFIG_CMD_FAT=y
++CONFIG_CMD_FS_GENERIC=y
++CONFIG_CMD_FS_UUID=y
++CONFIG_ENV_OVERWRITE=y
++CONFIG_ENV_IS_IN_MTD=y
++CONFIG_ENV_MTD_NAME="u-boot-env"
++CONFIG_ENV_SIZE_REDUND=0x0
++CONFIG_SYS_RELOC_GD_ENV_ADDR=y
++CONFIG_USE_DEFAULT_ENV_FILE=y
++CONFIG_DEFAULT_ENV_FILE="gatonetworks_gdsp_env"
++CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
++CONFIG_VERSION_VARIABLE=y
++CONFIG_NET_RANDOM_ETHADDR=y
++CONFIG_NETCONSOLE=y
++CONFIG_REGMAP=y
++CONFIG_SYSCON=y
++CONFIG_BUTTON=y
++CONFIG_BUTTON_GPIO=y
++CONFIG_CLK=y
++CONFIG_GPIO_HOG=y
++CONFIG_LED=y
++CONFIG_LED_BLINK=y
++CONFIG_LED_GPIO=y
++# CONFIG_MMC is not set
++CONFIG_MTD=y
++CONFIG_DM_MTD=y
++CONFIG_MTD_SPI_NAND=y
++CONFIG_DM_SPI_FLASH=y
++CONFIG_SPI_FLASH_SFDP_SUPPORT=y
++CONFIG_SPI_FLASH_EON=y
++CONFIG_SPI_FLASH_GIGADEVICE=y
++CONFIG_SPI_FLASH_ISSI=y
++CONFIG_SPI_FLASH_MACRONIX=y
++CONFIG_SPI_FLASH_SPANSION=y
++CONFIG_SPI_FLASH_STMICRO=y
++CONFIG_SPI_FLASH_WINBOND=y
++CONFIG_SPI_FLASH_XMC=y
++CONFIG_SPI_FLASH_XTX=y
++CONFIG_SPI_FLASH_MTD=y
++CONFIG_UBI_SILENCE_MSG=y
++CONFIG_PHY_FIXED=y
++CONFIG_MEDIATEK_ETH=y
++CONFIG_PHY=y
++CONFIG_PHY_MTK_TPHY=y
++CONFIG_PINCTRL=y
++CONFIG_PINCONF=y
++CONFIG_PINCTRL_MT7981=y
++CONFIG_POWER_DOMAIN=y
++CONFIG_MTK_POWER_DOMAIN=y
++CONFIG_DM_PWM=y
++CONFIG_PWM_MTK=y
++CONFIG_DM_SERIAL=y
++CONFIG_MTK_SERIAL=y
++CONFIG_SPI=y
++CONFIG_DM_SPI=y
++CONFIG_MTK_SPIM=y
++CONFIG_USB=y
++CONFIG_USB_XHCI_HCD=y
++CONFIG_USB_XHCI_MTK=y
++CONFIG_USB_STORAGE=y
++CONFIG_WDT=y
++CONFIG_WDT_GPIO=y
++CONFIG_UBIFS_SILENCE_MSG=y
++CONFIG_HEXDUMP=y
++CONFIG_LMB_MAX_REGIONS=64
+diff --git a/gatonetworks_gdsp_env b/gatonetworks_gdsp_env
+new file mode 100644
+index 0000000000..5af8d5b039
+--- /dev/null
++++ b/gatonetworks_gdsp_env
+@@ -0,0 +1,38 @@
++load_factory_data=if env exists factory_data_present ; then else mtd read Factory $loadaddr 0x0 0x1000 ; setenv factory_data_present 1 ; fi
++lan_mac_factory=run load_factory_data ; setexpr macoffs $loadaddr + 0x2a ; env readmem -b lan_mac $macoffs 0x6 ; setenv lan_mac_factory ; setenv macoffs
++wan_mac_factory=run load_factory_data ; setexpr macoffs $loadaddr + 0x24 ; env readmem -b wan_mac $macoffs 0x6 ; setenv wan_mac_factory ; setenv macoffs
++label_mac_factory=run load_factory_data ; setexpr macoffs $loadaddr + 0x4 ; env readmem -b label_mac $macoffs 0x6 ; setenv label_mac_factory ; setenv macoffs
++ethaddr_factory=setenv ethaddr $lan_mac ; setenv ethaddr_factory
++wifi_mac_factory=setenv wifi_mac $label_mac ; setenv wifi_mac_factory
++env_cleanup=setenv load_factory_data ; setenv factory_data_present ; setenv env_cleanup
++ipaddr=192.168.1.1
++serverip=192.168.1.10
++loadaddr=0x46000000
++bootcmd=run boot_nor
++bootdelay=0
++bootfile=openwrt-mediatek-filogic-gatonetworks_gdsp-initramfs-kernel.bin
++bootfile_upg=openwrt-mediatek-filogic-gatonetworks_gdsp-squashfs-sysupgrade.bin
++bootmenu_confirm_return=askenv - Press ENTER to return to menu ; bootmenu 60
++bootmenu_default=0
++bootmenu_delay=0
++bootmenu_title= [0;34m( ( ( [1;39mOpenWrt[0;34m ) ) )[0m
++bootmenu_0=Initialize environment.=run _firstboot
++bootmenu_0d=Run default boot command.=run boot_default
++bootmenu_1=Boot system via TFTP.=run boot_tftp ; run bootmenu_confirm_return
++bootmenu_2=Boot system from flash.=run boot_nor ; run bootmenu_confirm_return
++bootmenu_3=Load system via TFTP then write to flash.=run boot_tftp_sysupgrade ; run bootmenu_confirm_return
++bootmenu_4=Reset all settings to factory defaults.=run reset_factory ; reset
++bootmenu_5=Reboot.=reset
++boot_first=if button reset ; then run boot_tftp ; setenv flag_recover 1 ; run boot_default ; fi ; bootmenu
++boot_default=if env exists flag_recover ; then else run bootcmd ; fi ; run boot_tftp_forever
++boot_nor=mtd read firmware ${loadaddr} ; bootm $loadaddr
++boot_tftp=tftpboot $loadaddr $bootfile && bootm $loadaddr
++boot_tftp_forever=while true ; do run boot_tftp ; sleep 1 ; done
++boot_tftp_sysupgrade=tftpboot $loadaddr $bootfile_upg && iminfo $loadaddr && run nor_write_production
++reset_factory=env default -a && saveenv && reset
++nor_pad_size=setexpr image_eb $filesize / 0x1000 ; setexpr tmp1 image_size % 0x1000 ; test 0x$tmp1 -gt 0 && setexpr image_eb $image_eb + 1 ; setexpr image_eb $image_eb * 0x1000
++nor_write_production=run nor_pad_size ; test 0x$image_eb -le 0x1e80000 && mtd erase firmware 0x0 0x$image_eb && mtd write firmware $loadaddr 0x0 $filesize
++_init_env=setenv _init_env ; saveenv
++_firstboot=setenv _firstboot ; run _switch_to_menu ; run lan_mac_factory ; run wan_mac_factory ; run label_mac_factory ; run env_cleanup ; run ethaddr_factory ; run wifi_mac_factory ; run _init_env ; run boot_first
++_switch_to_menu=setenv _switch_to_menu ; setenv bootdelay 3 ; setenv bootmenu_delay 3 ; setenv bootmenu_0 $bootmenu_0d ; setenv bootmenu_0d ; run _bootmenu_update_title
++_bootmenu_update_title=setenv _bootmenu_update_title ; setenv bootmenu_title "$bootmenu_title [33m$ver[0m"
+--
+2.46.2
+
--
2.47.0
More information about the openwrt-devel
mailing list