[PATCH 2/3] base-files: upgrade: nand: use "cmd" argument for extracting command
Rafał Miłecki
zajec5 at gmail.com
Fri Jul 12 02:36:47 PDT 2024
From: Rafał Miłecki <rafal at milecki.pl>
NAND code uses either "cat" or "zcat" for getting firmware image
content. Code was full of duplicated ${gz}cat calls. Use "cmd" variable
that is determined by a caller and passed to lower level functions. This
avoids code duplication and allows adding support for more formats.
Signed-off-by: Rafał Miłecki <rafal at milecki.pl>
---
package/base-files/files/lib/upgrade/nand.sh | 82 ++++++++++----------
1 file changed, 41 insertions(+), 41 deletions(-)
diff --git a/package/base-files/files/lib/upgrade/nand.sh b/package/base-files/files/lib/upgrade/nand.sh
index 7a6873e224..0b76486ee7 100644
--- a/package/base-files/files/lib/upgrade/nand.sh
+++ b/package/base-files/files/lib/upgrade/nand.sh
@@ -57,11 +57,11 @@ nand_find_ubi() {
}
nand_get_magic_long() {
- (${3}cat "$1" | dd bs=4 "skip=${2:-0}" count=1 | hexdump -v -n 4 -e '1/1 "%02x"') 2> /dev/null
+ ($2 < "$1" | dd bs=4 "skip=${3:-0}" count=1 | hexdump -v -n 4 -e '1/1 "%02x"') 2> /dev/null
}
get_magic_long_tar() {
- (tar xO${3}f "$1" "$2" | dd bs=4 count=1 | hexdump -v -n 4 -e '1/1 "%02x"') 2> /dev/null
+ ($2 < "$1" | tar xOf - "$3" | dd bs=4 count=1 | hexdump -v -n 4 -e '1/1 "%02x"') 2> /dev/null
}
identify() {
@@ -73,7 +73,7 @@ identify_tar() {
}
identify_if_gzip() {
- if [ "$(identify "$1")" = gzip ]; then echo -n z; fi
+ if [ "$(identify "$1" "cat")" = gzip ]; then echo -n z; fi
}
nand_restore_config() {
@@ -259,64 +259,64 @@ nand_upgrade_prepare_ubi() {
# Write the UBI image to MTD ubi partition
nand_upgrade_ubinized() {
local ubi_file="$1"
- local gz="$2"
+ local cmd="$2"
- local ubi_length=$( (${gz}cat "$ubi_file" | wc -c) 2> /dev/null)
+ local ubi_length=$( ($cmd < "$ubi_file" | wc -c) 2> /dev/null)
nand_detach_ubi "$CI_UBIPART" || return 1
local mtdnum="$( find_mtd_index "$CI_UBIPART" )"
- ${gz}cat "$ubi_file" | ubiformat "/dev/mtd$mtdnum" -S "$ubi_length" -y -f - && ubiattach -m "$mtdnum"
+ $cmd < "$ubi_file" | ubiformat "/dev/mtd$mtdnum" -S "$ubi_length" -y -f - && ubiattach -m "$mtdnum"
}
# Write the UBIFS image to UBI rootfs volume
nand_upgrade_ubifs() {
local ubifs_file="$1"
- local gz="$2"
+ local cmd="$2"
- local ubifs_length=$( (${gz}cat "$ubifs_file" | wc -c) 2> /dev/null)
+ local ubifs_length=$( ($cmd < "$ubifs_file" | wc -c) 2> /dev/null)
nand_upgrade_prepare_ubi "$ubifs_length" "ubifs" "" "" || return 1
local ubidev="$( nand_find_ubi "$CI_UBIPART" )"
local root_ubivol="$(nand_find_volume $ubidev "$CI_ROOTPART")"
- ${gz}cat "$ubifs_file" | ubiupdatevol /dev/$root_ubivol -s "$ubifs_length" -
+ $cmd < "$ubifs_file" | ubiupdatevol /dev/$root_ubivol -s "$ubifs_length" -
}
# Write the FIT image to UBI kernel volume
nand_upgrade_fit() {
local fit_file="$1"
- local gz="$2"
+ local cmd="$2"
- local fit_length=$( (${gz}cat "$fit_file" | wc -c) 2> /dev/null)
+ local fit_length=$( ($cmd < "$fit_file" | wc -c) 2> /dev/null)
nand_upgrade_prepare_ubi "" "" "$fit_length" "1" || return 1
local fit_ubidev="$(nand_find_ubi "$CI_UBIPART")"
local fit_ubivol="$(nand_find_volume $fit_ubidev "$CI_KERNPART")"
- ${gz}cat "$fit_file" | ubiupdatevol /dev/$fit_ubivol -s "$fit_length" -
+ $cmd < "$fit_file" | ubiupdatevol /dev/$fit_ubivol -s "$fit_length" -
}
# Write images in the TAR file to MTD partitions and/or UBI volumes as required
nand_upgrade_tar() {
local tar_file="$1"
- local gz="$2"
+ local cmd="$2"
local jffs2_markers="${CI_JFFS2_CLEAN_MARKERS:-0}"
# WARNING: This fails if tar contains more than one 'sysupgrade-*' directory.
- local board_dir="$(tar t${gz}f "$tar_file" | grep -m 1 '^sysupgrade-.*/$')"
+ local board_dir="$($cmd < "$tar_file" | tar tf - | grep -m 1 '^sysupgrade-.*/$')"
board_dir="${board_dir%/}"
local kernel_mtd kernel_length
if [ "$CI_KERNPART" != "none" ]; then
kernel_mtd="$(find_mtd_index "$CI_KERNPART")"
- kernel_length=$( (tar xO${gz}f "$tar_file" "$board_dir/kernel" | wc -c) 2> /dev/null)
+ kernel_length=$( ($cmd < "$tar_file" | tar xOf - "$board_dir/kernel" | wc -c) 2> /dev/null)
[ "$kernel_length" = 0 ] && kernel_length=
fi
- local rootfs_length=$( (tar xO${gz}f "$tar_file" "$board_dir/root" | wc -c) 2> /dev/null)
+ local rootfs_length=$( ($cmd < "$tar_file" | tar xOf - "$board_dir/root" | wc -c) 2> /dev/null)
[ "$rootfs_length" = 0 ] && rootfs_length=
local rootfs_type
- [ "$rootfs_length" ] && rootfs_type="$(identify_tar "$tar_file" "$board_dir/root" "$gz")"
+ [ "$rootfs_length" ] && rootfs_type="$(identify_tar "$tar_file" "$cmd" "$board_dir/root")"
local ubi_kernel_length
if [ "$kernel_length" ]; then
@@ -337,23 +337,23 @@ nand_upgrade_tar() {
if [ "$rootfs_length" ]; then
local ubidev="$( nand_find_ubi "${CI_ROOT_UBIPART:-$CI_UBIPART}" )"
local root_ubivol="$( nand_find_volume $ubidev "$CI_ROOTPART" )"
- tar xO${gz}f "$tar_file" "$board_dir/root" | \
+ $cmd < "$tar_file" | tar xOf - "$board_dir/root" | \
ubiupdatevol /dev/$root_ubivol -s "$rootfs_length" -
fi
if [ "$kernel_length" ]; then
if [ "$kernel_mtd" ]; then
if [ "$jffs2_markers" = 1 ]; then
flash_erase -j "/dev/mtd${kernel_mtd}" 0 0
- tar xO${gz}f "$tar_file" "$board_dir/kernel" | \
+ $cmd < "$tar_file" | tar xOf - "$board_dir/kernel" | \
nandwrite "/dev/mtd${kernel_mtd}" -
else
- tar xO${gz}f "$tar_file" "$board_dir/kernel" | \
+ $cmd < "$tar_file" | tar xOf - "$board_dir/kernel" | \
mtd write - "$CI_KERNPART"
fi
else
local ubidev="$( nand_find_ubi "${CI_KERN_UBIPART:-$CI_UBIPART}" )"
local kern_ubivol="$( nand_find_volume $ubidev "$CI_KERNPART" )"
- tar xO${gz}f "$tar_file" "$board_dir/kernel" | \
+ $cmd < "$tar_file" | tar xOf - "$board_dir/kernel" | \
ubiupdatevol /dev/$kern_ubivol -s "$kernel_length" -
fi
fi
@@ -363,9 +363,9 @@ nand_upgrade_tar() {
nand_verify_if_gzip_file() {
local file="$1"
- local gz="$2"
+ local cmd="$2"
- if [ "$gz" = z ]; then
+ if [ "$cmd" = zcat ]; then
echo "verifying compressed sysupgrade file integrity"
if ! gzip -t "$file"; then
echo "corrupted compressed sysupgrade file"
@@ -376,10 +376,10 @@ nand_verify_if_gzip_file() {
nand_verify_tar_file() {
local file="$1"
- local gz="$2"
+ local cmd="$2"
echo "verifying sysupgrade tar file integrity"
- if ! tar xO${gz}f "$file" > /dev/null; then
+ if ! $cmd < "$file" | tar xOf - > /dev/null; then
echo "corrupted sysupgrade tar file"
return 1
fi
@@ -388,27 +388,27 @@ nand_verify_tar_file() {
nand_do_flash_file() {
local file="$1"
- local gz="$(identify_if_gzip "$file")"
- local file_type="$(identify "$file" "" "$gz")"
+ local cmd="$(identify_if_gzip "$file")cat"
+ local file_type="$(identify "$file" "$cmd" "")"
[ ! "$(find_mtd_index "$CI_UBIPART")" ] && CI_UBIPART=rootfs
case "$file_type" in
"fit")
- nand_verify_if_gzip_file "$file" "$gz" || return 1
- nand_upgrade_fit "$file" "$gz"
+ nand_verify_if_gzip_file "$file" "$cmd" || return 1
+ nand_upgrade_fit "$file" "$cmd"
;;
"ubi")
- nand_verify_if_gzip_file "$file" "$gz" || return 1
- nand_upgrade_ubinized "$file" "$gz"
+ nand_verify_if_gzip_file "$file" "$cmd" || return 1
+ nand_upgrade_ubinized "$file" "$cmd"
;;
"ubifs")
- nand_verify_if_gzip_file "$file" "$gz" || return 1
- nand_upgrade_ubifs "$file" "$gz"
+ nand_verify_if_gzip_file "$file" "$cmd" || return 1
+ nand_upgrade_ubifs "$file" "$cmd"
;;
*)
- nand_verify_tar_file "$file" "$gz" || return 1
- nand_upgrade_tar "$file" "$gz"
+ nand_verify_tar_file "$file" "$cmd" || return 1
+ nand_upgrade_tar "$file" "$cmd"
;;
esac
}
@@ -470,18 +470,18 @@ nand_do_platform_check() {
local board_name="$1"
local file="$2"
- local gz="$(identify_if_gzip "$file")"
- local file_type="$(identify "$file" "" "$gz")"
- local control_length=$( (tar xO${gz}f "$file" "sysupgrade-${board_name//,/_}/CONTROL" | wc -c) 2> /dev/null)
+ local cmd="$(identify_if_gzip "$file")cat"
+ local file_type="$(identify "$file" "$cmd" "")"
+ local control_length=$( ($cmd < "$file" | tar xOf - "sysupgrade-${board_name//,/_}/CONTROL" | wc -c) 2> /dev/null)
if [ "$control_length" = 0 ]; then
- control_length=$( (tar xO${gz}f "$file" "sysupgrade-${board_name//_/,}/CONTROL" | wc -c) 2> /dev/null)
+ control_length=$( ($cmd < "$file" | tar xOf - "sysupgrade-${board_name//_/,}/CONTROL" | wc -c) 2> /dev/null)
fi
if [ "$control_length" != 0 ]; then
- nand_verify_tar_file "$file" "$gz" || return 1
+ nand_verify_tar_file "$file" "$cmd" || return 1
else
- nand_verify_if_gzip_file "$file" "$gz" || return 1
+ nand_verify_if_gzip_file "$file" "$cmd" || return 1
if [ "$file_type" != "fit" -a "$file_type" != "ubi" -a "$file_type" != "ubifs" ]; then
echo "invalid sysupgrade file"
return 1
--
2.35.3
More information about the openwrt-devel
mailing list