[PATCH] mediatek: filogic: replace built-in Aquantia driver with module

[Rafał Miłecki]

From: Rafał Miłecki <rafal at milecki.pl>

Some Aquantia PHYs (e.g. AQR113C) require firmware to be uploaded by
host system. With built-in drivers this doesn't work in OpenWrt /
embeddded as filesystem isn't available during PHY probe. That results
in delays like:
[    1.588068] Aquantia AQR113C mdio-bus:00: Falling back to sysfs fallback for: Rhe-05.06-Candidate9-AQR_Mediatek_23B_P5_ID45824_LCLVER1.cld
[   64.526387] Aquantia AQR113C mdio-bus:00: failed to find FW file Rhe-05.06-Candidate9-AQR_Mediatek_23B_P5_ID45824_LCLVER1.cld (-110)

Switch to module to postpone PHY probe to init state.

Signed-off-by: Rafał Miłecki <rafal at milecki.pl>
---
 target/linux/mediatek/filogic/config-5.15 | 1 -
 target/linux/mediatek/filogic/config-6.1  | 1 -
 target/linux/mediatek/filogic/target.mk   | 2 +-
 3 files changed, 1 insertion(+), 3 deletions(-)

diff --git a/target/linux/mediatek/filogic/config-5.15 b/target/linux/mediatek/filogic/config-5.15
index 8ba0b0efe8..783447ac9c 100644
--- a/target/linux/mediatek/filogic/config-5.15
+++ b/target/linux/mediatek/filogic/config-5.15
@@ -1,6 +1,5 @@
 CONFIG_64BIT=y
 # CONFIG_AHCI_MTK is not set
-CONFIG_AQUANTIA_PHY=y
 CONFIG_ARCH_DMA_ADDR_T_64BIT=y
 CONFIG_ARCH_KEEP_MEMBLOCK=y
 CONFIG_ARCH_MEDIATEK=y
diff --git a/target/linux/mediatek/filogic/config-6.1 b/target/linux/mediatek/filogic/config-6.1
index 1687aadbc1..1eaf57b06e 100644
--- a/target/linux/mediatek/filogic/config-6.1
+++ b/target/linux/mediatek/filogic/config-6.1
@@ -1,6 +1,5 @@
 CONFIG_64BIT=y
 # CONFIG_AHCI_MTK is not set
-CONFIG_AQUANTIA_PHY=y
 CONFIG_ARCH_BINFMT_ELF_EXTRA_PHDRS=y
 CONFIG_ARCH_CORRECT_STACKTRACE_ON_KRETPROBE=y
 CONFIG_ARCH_DMA_ADDR_T_64BIT=y
diff --git a/target/linux/mediatek/filogic/target.mk b/target/linux/mediatek/filogic/target.mk
index dd4c4c1448..182b229db2 100644
--- a/target/linux/mediatek/filogic/target.mk
+++ b/target/linux/mediatek/filogic/target.mk
@@ -2,7 +2,7 @@ ARCH:=aarch64
 SUBTARGET:=filogic
 BOARDNAME:=Filogic 8x0 (MT798x)
 CPU_TYPE:=cortex-a53
-DEFAULT_PACKAGES += kmod-crypto-hw-safexcel kmod-mt7915e wpad-basic-mbedtls uboot-envtools
+DEFAULT_PACKAGES += kmod-phy-aquantia kmod-crypto-hw-safexcel kmod-mt7915e wpad-basic-mbedtls uboot-envtools
 KERNELNAME:=Image dtbs
 
 define Target/Description
-- 
2.35.3