[PATCH] airoha: dts: fix pcie ranges properties

[Robert Marko]

On Mon, 26 Feb 2024 at 17:28, Lorenzo Bianconi
<lorenzo.bianconi at redhat.com> wrote:
>
> > On Mon, 26 Feb 2024 at 15:07, Lorenzo Bianconi <lorenzo at kernel.org> wrote:
> > >
> > > > On Fri, 5 Jan 2024 at 17:18, Lorenzo Bianconi <lorenzo at kernel.org> wrote:
> > > > >
> > > > > Reduce and split pcie controller memory ranges for en7523 SoC
> > > > > in order to properly load a pcie card on the second port.
> > > > >
> > > > > Signed-off-by: Lorenzo Bianconi <lorenzo at kernel.org>
> > > >
> > > > Sorry for it taking so long, but merged.
> > >
> > > no worries :)
> > >
> > > >
> > > > BTW, do you know is there anybody willing to maintain this target?
> > >
> > > since I am currently working on en7581 (even if I do not have too much free
> > > cycles) I can help maintaining it.
> >
> > That would be great as currently I have been doing kernel bumps
> > without a board to test on as
> > otherwise the target would be dropped.
>
> ack, fine. Am I supposed to do something in this case?

It would be great if you can test the 6.1 kernel update for airoha,
ideally in the future
keep the target up to date with current kernels.

Regards,
Robert
>
> Regards,
> Lorenzo
>
> >
> > Regards,
> > Robert
> > >
> > > Regards,
> > > Lorenzo
> > >
> > > >
> > > > Regards,
> > > > Robert
> > > > > ---
> > > > >  target/linux/airoha/dts/en7523.dtsi | 4 ++--
> > > > >  1 file changed, 2 insertions(+), 2 deletions(-)
> > > > >
> > > > > diff --git a/target/linux/airoha/dts/en7523.dtsi b/target/linux/airoha/dts/en7523.dtsi
> > > > > index 72478b225cbb..024a89752acb 100644
> > > > > --- a/target/linux/airoha/dts/en7523.dtsi
> > > > > +++ b/target/linux/airoha/dts/en7523.dtsi
> > > > > @@ -157,7 +157,7 @@
> > > > >                 clocks = <&scu EN7523_CLK_PCIE>;
> > > > >                 clock-names = "sys_ck0";
> > > > >                 bus-range = <0x00 0xff>;
> > > > > -               ranges = <0x82000000 0 0x20000000  0x20000000  0 0x8000000>;
> > > > > +               ranges = <0x82000000 0 0x20000000 0x20000000 0 0x2000000>;
> > > > >                 status = "disabled";
> > > > >
> > > > >                 #interrupt-cells = <1>;
> > > > > @@ -186,7 +186,7 @@
> > > > >                 clocks = <&scu EN7523_CLK_PCIE>;
> > > > >                 clock-names = "sys_ck1";
> > > > >                 bus-range = <0x00 0xff>;
> > > > > -               ranges = <0x82000000 0 0x28000000  0x28000000  0 0x8000000>;
> > > > > +               ranges = <0x82000000 0 0x22000000 0x22000000 0 0x2000000>;
> > > > >                 status = "disabled";
> > > > >
> > > > >                 #interrupt-cells = <1>;
> > > > > --
> > > > > 2.43.0
> > > > >
> > > > >
> > > > > _______________________________________________
> > > > > openwrt-devel mailing list
> > > > > openwrt-devel at lists.openwrt.org
> > > > > https://lists.openwrt.org/mailman/listinfo/openwrt-devel
> >