[PATCH] airoha: dts: fix pcie ranges properties

[Robert Marko]

On Mon, 26 Feb 2024 at 15:07, Lorenzo Bianconi <lorenzo at kernel.org> wrote:
>
> > On Fri, 5 Jan 2024 at 17:18, Lorenzo Bianconi <lorenzo at kernel.org> wrote:
> > >
> > > Reduce and split pcie controller memory ranges for en7523 SoC
> > > in order to properly load a pcie card on the second port.
> > >
> > > Signed-off-by: Lorenzo Bianconi <lorenzo at kernel.org>
> >
> > Sorry for it taking so long, but merged.
>
> no worries :)
>
> >
> > BTW, do you know is there anybody willing to maintain this target?
>
> since I am currently working on en7581 (even if I do not have too much free
> cycles) I can help maintaining it.

That would be great as currently I have been doing kernel bumps
without a board to test on as
otherwise the target would be dropped.

Regards,
Robert
>
> Regards,
> Lorenzo
>
> >
> > Regards,
> > Robert
> > > ---
> > >  target/linux/airoha/dts/en7523.dtsi | 4 ++--
> > >  1 file changed, 2 insertions(+), 2 deletions(-)
> > >
> > > diff --git a/target/linux/airoha/dts/en7523.dtsi b/target/linux/airoha/dts/en7523.dtsi
> > > index 72478b225cbb..024a89752acb 100644
> > > --- a/target/linux/airoha/dts/en7523.dtsi
> > > +++ b/target/linux/airoha/dts/en7523.dtsi
> > > @@ -157,7 +157,7 @@
> > >                 clocks = <&scu EN7523_CLK_PCIE>;
> > >                 clock-names = "sys_ck0";
> > >                 bus-range = <0x00 0xff>;
> > > -               ranges = <0x82000000 0 0x20000000  0x20000000  0 0x8000000>;
> > > +               ranges = <0x82000000 0 0x20000000 0x20000000 0 0x2000000>;
> > >                 status = "disabled";
> > >
> > >                 #interrupt-cells = <1>;
> > > @@ -186,7 +186,7 @@
> > >                 clocks = <&scu EN7523_CLK_PCIE>;
> > >                 clock-names = "sys_ck1";
> > >                 bus-range = <0x00 0xff>;
> > > -               ranges = <0x82000000 0 0x28000000  0x28000000  0 0x8000000>;
> > > +               ranges = <0x82000000 0 0x22000000 0x22000000 0 0x2000000>;
> > >                 status = "disabled";
> > >
> > >                 #interrupt-cells = <1>;
> > > --
> > > 2.43.0
> > >
> > >
> > > _______________________________________________
> > > openwrt-devel mailing list
> > > openwrt-devel at lists.openwrt.org
> > > https://lists.openwrt.org/mailman/listinfo/openwrt-devel