[PATCH 2/3] ipip6/ds-lite: Integrate ds-lite and ipip6 ds-lite and ipip6 now use the same backend ipip6.sh
ms at missing233.com
ms at missing233.com
Mon Feb 12 09:01:15 PST 2024
From: Arayuki Mago <ms at missing233.com>
Signed-off-by: Arayuki Mago <ms at missing233.com>
---
package/network/ipv6/ds-lite/Makefile | 2 +-
.../ds-lite/files/{dslite.sh => ipip6.sh} | 72 +++++++++++++------
package/network/ipv6/ipip6/Makefile | 13 ++--
package/network/ipv6/ipip6/files/ipip6.sh | 68 +++++++++++++-----
4 files changed, 109 insertions(+), 46 deletions(-)
rename package/network/ipv6/ds-lite/files/{dslite.sh => ipip6.sh} (67%)
diff --git a/package/network/ipv6/ds-lite/Makefile b/package/network/ipv6/ds-lite/Makefile
index 502da366a9..a6ea315c88 100644
--- a/package/network/ipv6/ds-lite/Makefile
+++ b/package/network/ipv6/ds-lite/Makefile
@@ -36,7 +36,7 @@ endef
define Package/ds-lite/install
$(INSTALL_DIR) $(1)/lib/netifd/proto
- $(INSTALL_BIN) ./files/dslite.sh $(1)/lib/netifd/proto/dslite.sh
+ $(INSTALL_BIN) ./files/ipip6.sh $(1)/lib/netifd/proto/ipip6.sh
endef
$(eval $(call BuildPackage,ds-lite))
diff --git a/package/network/ipv6/ds-lite/files/dslite.sh b/package/network/ipv6/ds-lite/files/ipip6.sh
similarity index 67%
rename from package/network/ipv6/ds-lite/files/dslite.sh
rename to package/network/ipv6/ds-lite/files/ipip6.sh
index 017963926d..5c2755df76 100644
--- a/package/network/ipv6/ds-lite/files/dslite.sh
+++ b/package/network/ipv6/ds-lite/files/ipip6.sh
@@ -1,5 +1,5 @@
#!/bin/sh
-# dslite.sh - IPv4-in-IPv6 tunnel backend
+# ipip6.sh - IPv4-in-IPv6 tunnel backend for ipip6 and ds-lite
# Copyright (c) 2013 OpenWrt.org
[ -n "$INCLUDE_ONLY" ] || {
@@ -9,10 +9,13 @@
init_proto "$@"
}
-proto_dslite_setup() {
+tnl_setup() {
local cfg="$1"
local iface="$2"
- local link="ds-$cfg"
+ local tnl_type="$3"
+ local ip4addr="$4"
+ local ip4gateway="$5"
+ local link="$tnl_type-$cfg"
local remoteip6
local mtu ttl peeraddr ip6addr tunlink zone weakif encaplimit
@@ -24,7 +27,7 @@ proto_dslite_setup() {
return
}
- ( proto_add_host_dependency "$cfg" "::" "$tunlink" )
+ proto_add_host_dependency "$cfg" "::" "$tunlink"
remoteip6=$(resolveip -6 "$peeraddr")
if [ -z "$remoteip6" ]; then
@@ -36,10 +39,7 @@ proto_dslite_setup() {
fi
fi
- for ip6 in $remoteip6; do
- peeraddr=$ip6
- break
- done
+ peeraddr=$(echo "$remoteip6" | head -n 1)
[ -z "$ip6addr" ] && {
local wanif="$tunlink"
@@ -59,7 +59,7 @@ proto_dslite_setup() {
proto_init_update "$link" 1
proto_add_ipv4_route "0.0.0.0" 0
- proto_add_ipv4_address "192.0.0.2" "" "" "192.0.0.1"
+ proto_add_ipv4_address "$ip4addr" "" "" "$ip4gateway"
proto_add_tunnel
json_add_string mode ipip6
@@ -76,23 +76,22 @@ proto_dslite_setup() {
proto_add_data
[ -n "$zone" ] && json_add_string zone "$zone"
- json_add_array firewall
- json_add_object ""
- json_add_string type nat
- json_add_string target ACCEPT
- json_close_object
- json_close_array
+ if [ "$tnl_type" = "ds" ]; then
+ json_add_array firewall
+ json_add_object ""
+ json_add_string type nat
+ json_add_string target ACCEPT
+ json_close_object
+ json_close_array
+ fi
+
proto_close_data
proto_send_update "$cfg"
}
-proto_dslite_teardown() {
- local cfg="$1"
-}
-
-proto_dslite_init_config() {
- no_device=1
+init_config() {
+ no_device=1
available=1
proto_config_add_string "ip6addr"
@@ -105,6 +104,35 @@ proto_dslite_init_config() {
proto_config_add_string "weakif"
}
+proto_ipip6_init_config() {
+ init_config
+ proto_config_add_string "ip4ifaddr"
+}
+
+proto_ipip6_setup() {
+ local ip4ifaddr
+ json_get_vars ip4ifaddr
+ tnl_setup "$1" "$2" "ipip6" "$ip4ifaddr" "0.0.0.0"
+}
+
+proto_ipip6_teardown() {
+ local cfg="$1"
+}
+
+proto_dslite_init_config() {
+ init_config
+}
+
+proto_dslite_setup() {
+ tnl_setup "$1" "$2" "ds" "192.0.0.2" "192.0.0.1"
+}
+
+proto_dslite_teardown() {
+ local cfg="$1"
+}
+
[ -n "$INCLUDE_ONLY" ] || {
- add_protocol dslite
+
+ add_protocol ipip6;
+ add_protocol dslite;
}
diff --git a/package/network/ipv6/ipip6/Makefile b/package/network/ipv6/ipip6/Makefile
index 034f17e0c0..32d16181b0 100644
--- a/package/network/ipv6/ipip6/Makefile
+++ b/package/network/ipv6/ipip6/Makefile
@@ -1,6 +1,7 @@
#
# Copyright (C) 2013 OpenWrt.org
-# Copyright (C) 2021 kenjiuno
+#
+# Original Maintainers: Steven Barth <steven at midlink.org>, kenjiuno <ku at digitaldolphins.jp>
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
@@ -9,10 +10,8 @@
include $(TOPDIR)/rules.mk
PKG_NAME:=ipip6
-PKG_VERSION:=0.1
PKG_RELEASE:=6
PKG_LICENSE:=GPL-2.0
-PKG_MAINTAINER:=kenjiuno
include $(INCLUDE_DIR)/package.mk
@@ -20,13 +19,15 @@ define Package/ipip6
SECTION:=net
CATEGORY:=Network
DEPENDS:=@IPV6 +kmod-ip6-tunnel +resolveip
- TITLE:=IPv4 over IPv6 (RFC2473) configuration support
- MAINTAINER:=kenjiuno <ku at digitaldolphins.jp>
+ TITLE:=IPv4 over IPv6 (RFC2473/DS-Lite) configuration support
+ MAINTAINER:=missing233 <ms at missing233.com>
PKGARCH:=all
endef
define Package/ipip6/description
-Provides support for IPv4 over IPv6 (RFC2473) in /etc/config/network.
+Provides support for IPv4 over IPv6 (RFC2473/DS-Lite) in /etc/config/network.
+Refer to http://wiki.openwrt.org/doc/uci/network for
+configuration details.
endef
define Build/Compile
diff --git a/package/network/ipv6/ipip6/files/ipip6.sh b/package/network/ipv6/ipip6/files/ipip6.sh
index ceadf71f67..1fcf21adf5 100644
--- a/package/network/ipv6/ipip6/files/ipip6.sh
+++ b/package/network/ipv6/ipip6/files/ipip6.sh
@@ -1,7 +1,8 @@
#!/bin/sh
-# ipip6.sh - ipip6 tunnel(RFC2473) backend
+# ipip6.sh - IPv4-in-IPv6 tunnel backend for ipip6 and ds-lite
# Copyright (c) 2013 OpenWrt.org
# Copyright (c) 2021 kenjiuno
+# Copyright (c) 2024 missing233
[ -n "$INCLUDE_ONLY" ] || {
. /lib/functions.sh
@@ -10,14 +11,17 @@
init_proto "$@"
}
-proto_ipip6_setup() {
+tnl_setup() {
local cfg="$1"
local iface="$2"
- local link="ipip6-$cfg"
+ local tnl_type="$3"
+ local ip4addr="$4"
+ local ip4gateway="$5"
+ local link="$tnl_type-$cfg"
local remoteip6
- local mtu ttl peeraddr ip6addr tunlink zone weakif encaplimit ip4ifaddr
- json_get_vars mtu ttl peeraddr ip6addr tunlink zone weakif encaplimit ip4ifaddr
+ local mtu ttl peeraddr ip6addr tunlink zone weakif encaplimit
+ json_get_vars mtu ttl peeraddr ip6addr tunlink zone weakif encaplimit
[ -z "$peeraddr" ] && {
proto_notify_error "$cfg" "MISSING_ADDRESS"
@@ -25,7 +29,7 @@ proto_ipip6_setup() {
return
}
- ( proto_add_host_dependency "$cfg" "::" "$tunlink" )
+ proto_add_host_dependency "$cfg" "::" "$tunlink"
remoteip6=$(resolveip -6 "$peeraddr")
if [ -z "$remoteip6" ]; then
@@ -37,10 +41,7 @@ proto_ipip6_setup() {
fi
fi
- for ip6 in $remoteip6; do
- peeraddr=$ip6
- break
- done
+ peeraddr=$(echo "$remoteip6" | head -n 1)
[ -z "$ip6addr" ] && {
local wanif="$tunlink"
@@ -60,7 +61,7 @@ proto_ipip6_setup() {
proto_init_update "$link" 1
proto_add_ipv4_route "0.0.0.0" 0
- proto_add_ipv4_address "$ip4ifaddr" "" "" "0.0.0.0"
+ proto_add_ipv4_address "$ip4addr" "" "" "$ip4gateway"
proto_add_tunnel
json_add_string mode ipip6
@@ -77,16 +78,21 @@ proto_ipip6_setup() {
proto_add_data
[ -n "$zone" ] && json_add_string zone "$zone"
+ if [ "$tnl_type" = "ds" ]; then
+ json_add_array firewall
+ json_add_object ""
+ json_add_string type nat
+ json_add_string target ACCEPT
+ json_close_object
+ json_close_array
+ fi
+
proto_close_data
proto_send_update "$cfg"
}
-proto_ipip6_teardown() {
- local cfg="$1"
-}
-
-proto_ipip6_init_config() {
+init_config() {
no_device=1
available=1
@@ -98,9 +104,37 @@ proto_ipip6_init_config() {
proto_config_add_string "encaplimit"
proto_config_add_string "zone"
proto_config_add_string "weakif"
+}
+
+proto_ipip6_init_config() {
+ init_config
proto_config_add_string "ip4ifaddr"
}
+proto_ipip6_setup() {
+ local ip4ifaddr
+ json_get_vars ip4ifaddr
+ tnl_setup "$1" "$2" "ipip6" "$ip4ifaddr" "0.0.0.0"
+}
+
+proto_ipip6_teardown() {
+ local cfg="$1"
+}
+
+proto_dslite_init_config() {
+ init_config
+}
+
+proto_dslite_setup() {
+ tnl_setup "$1" "$2" "ds" "192.0.0.2" "192.0.0.1"
+}
+
+proto_dslite_teardown() {
+ local cfg="$1"
+}
+
[ -n "$INCLUDE_ONLY" ] || {
- add_protocol ipip6
+
+ add_protocol ipip6;
+ add_protocol dslite;
}
--
2.40.1.windows.1
More information about the openwrt-devel
mailing list