[OpenWrt-Devel] [PATCH 2/2] ipq40xx: add support for Aruba AP-303

[Robert Marko]

On Thu, 16 Nov 2023 at 10:53, Luca Olivetti <luca at ventoso.org> wrote:
>
> El 17/12/19 a les 12:52, David Bauer ha escrit:
>
> > 3. Configure the bootargs and bootcmd for OpenWrt.
> >     $ setenv bootargs_openwrt "setenv bootargs console=ttyMSM1,9600n8"
> >     $ setenv nandboot_openwrt "run bootargs_openwrt; ubi part aos1;
> >       ubi read 0x85000000 kernel; bootm 0x85000000"
> >     $ setenv ramboot_openwrt "run bootargs_openwrt;
> >       setenv ipaddr 192.168.1.105; setenv serverip 192.168.1.75;
> >       netget; set fdt_high 0x87000000; bootm"
> >     $ setenv bootcmd "run nandboot_openwrt"
> >     $ saveenv
>
>
> Hello,
>
> as explained here
>
> https://forum.openwrt.org/t/aruba-iap-11-apboot-downgrade-invalid-instant-small-business-image/120921
>
>
> it is no longer possible to install openwrt because they have removed
> the bootm command from apboot.
>
> I asked here
> https://forum.openwrt.org/t/apboot-dump-for-aruba-iap11-ap303-or-compatible-u-boot/177595/2

I have shared a dump from my AP11 that worked with OpenWrt.

But please make sure they did not enable secure boot in the mean time.

Regards,
Robert
>
> for the old apboot image (it's possible to flash the spi from the new
> apboot) but I'm wondering if it would be possible to compile a
> compatible u-boot for this AP?
>
>
> Bye
> --
> Luca
>
>
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel at lists.openwrt.org
> https://lists.openwrt.org/mailman/listinfo/openwrt-devel